Products in Thermoset Resins: Hand Lay-up

Biresin® CR82 is an epoxy resin system designed for the hand lay-up, vacuum bagging and filament-winding processes, especially for applications where curing temperatures of ≥ 75 °C cannot be implemented.

DISTITRON® 135 SX - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce marine,boats through hand lay up and spray up method.

EPOVIA RF-9000(P) is Bisphenol-A epoxy based vinyl ester resin for primer and it is generally used in Chemical Industry,Industrial sector applicatons

Enydyne® LSP-8020TLSE is general purpose ortho-DCPD resin for hand lay up and spray up. Main applications areas are industrial sector, marine etc.

Norsodyne® HG-5689BTY - thixotropic, preaccelerated. It is generally used in industrial sector applicatons.

EPOVIA OPTIMUM® KRF 2000 SE - Brominated Epoxy Resin based vinyl ester in styrene. It is used as general purpose in filament winding,vacuum injection,hand lay up and spray up,pultrusion method.

NORSODYNE® F 25233 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks through filament winding,hand lay up and spray up method.

Sicomin SR 8500 / SD 860x is a laminating epoxy systems developed by Sicomin and adapted for the production of high performance composites. It is Germanischer Llyod's certified, this multi-purpose epoxy system is recommended for the construction of large components.

Norsodyne® G-613BTR - thixotropic, preaccelerated, fast hardness build up, good mechanical property. It is generally used in marine applicatons.

Norsodyne® G-550TLSE - thixotropic, preaccelerated, high strength, lloyd's approved. Main applications areas are automotive, industrial sector, marine etc.

Lerpol 3633 is a high quality OrthoPhtalic resin, RINA approved for boatbuilding. They are formulated for rapid impregnation of fibers, no sagging on vertical surfaces and excellent throughcure. Various formulations are available, suitable for different thicknesses and different operating conditions. They are also available in low styrene emission version.

Norsodyne® G-689STY - thixotropic, preaccelerated, fast cure, crack resistance. It is generally used in industrial sector applicatons.

LAM-125 / LAM-237 has Low viscosity for quick wet out of synthetic composite fabrics; especially effective with Kevlar® and carbon fiber.

Enchuan 6120TA is a non-wax type resin. It is similar to 6120TWA, 6120TA also designed for hand lay-up operations to make general FRP products.

Rhino Linings USA, Inc. 1382 Resin is a Low Modulus Flexible Epoxy Resin.1:1 highly flexible epoxy system. Retains flexibility at low temperature. 150% elongation, even when aged. Convenient 1:1 volumetric mix ratio.

ARMORSTAR VSXH Series is generally used in Automotive,Building and Construction,Composites,Industrial sector,Marine,Mass Transports,Mold manufacture applications.

Rhino Linings USA, Inc. 1379 Resin is a Laminating and Tooling Epoxy Resin. Specialty epoxy system used for making large scale parts such as wind turbine rotors. Long working life with quick cure. High Tg without post cure.

Polynt Group 787-2599 - toughened vinyl ester resin offering improved fracture toughness and crack resistance; unthixed, unpromoted. Main applications areas are aeolian, aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, consumer products, home and domestic applications, industrial sector, marine, mass transports, mold manufacture railway sector etc.

LAM-125 / LAM-226 has Low viscosity for quick wet out of synthetic composite fabrics; especially effective with Kevlar® and carbon fiber.

Norsodyne® G-713BT - thixotropic, preaccelerated, high grade yacht, high strength, impact resistance, lloyd's approved. It is generally used in marine applicatons.

Norsodyne® 3310W has general purpose, excellent water resistance, promoted and waxed version of Norsodyne® 3310. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Aekyung Chemical LS-123 is an ortho type UPR.

PRF Composite Materials RS-L135 exhibits good mechanical properties after curing at room temperature. If high temperature strength is not required, finished products made with the selection of hardeners up to RS-H136 may be used without further heat treatment. Post curing (heat treatment) will further enhance the mechanical properties and will also increase the heat resistance.

NORESTER 019 is a Orthophthalic resin, Non-thixotropic and non-accelerated product.

NORSODYNE® H 44281 TA - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce marine,boats through hand lay up and spray up method.

AOC's Vipel F764 Series is a high cross-linked isophthalic polyester resin.AOC's Vipel F764 Series resins were developed to meet the demanding requirements of underground petroleum storage tanks that contain oxygenated fuels.BENEFITSUL RecognitionAOC's Vipel F764 Series resins are recognized by UL for meeting the requirements of UL 1316 and UL 1746 Part II and Part III.Corrosion ResistanceVipel F764 Series resins provide excellent corrosion resistance when used in contact with inorganic and organic acids. Solvent resistance is field-proven for many fuels including gasoline, kerosene, heating oil and crude oils. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion reistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up, filament winding, etc.

Polydyne® 6084 - orthophthalic resin for roof tiles, promoted, medium viscosity and with UV absorber. Main applications areas are building and construction, composites, home and domestic applications, industrial sector etc.

Rhino Linings USA, Inc. 1319 Resin is a Press Molding Resin Modified for Improved Flexibility and Adhesion. Press molding epoxy system, modified for added flexibility and adhesion. All listed hardeners cure very quickly at standard process temperatures (160°F – 210°F).

Norsodyne® SG-550 - for acrylic backup. Main applications areas are home and domestic applications etc.

Polydyne® 7215 - low viscosity, high reactivity for RTM process. Main applications areas are composites, mass transports etc.

NORSODYNE® H 44173 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce marine,boats,pipes and tanks through centrifugal casting,filament winding,hand lay up and spray up,injection molding,rtm,press and vacuum molding,pultrusion method.

ENYDYNE® H 66132 TAP - Unsaturated polyester resin in styrene,DCPD. It is used to produce furnitures and sanitary through hand lay up and spray up method.

AOC's Vipel F010 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F010 series is ideally suited for use in hand lay-up, spray-up, filament winding, SMC, and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F010 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistanceVipel F010 is highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

Epovia Optimum® KRF-1001MVHV is bisphenol-A epoxy based vinyl ester resin with low color, chemical resistance, low foaming, fast cure and it is generally used in building and construction, chemical industry, industrial sector applicatons.

Polynt Group 787-5995 - toughened vinyl ester resin core shell rubber that offers dramatically improved fracture toughness and corrosion resistance of typical vinyl ester resins; promoted for room temperature cure. Main applications areas are aeolian, aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, consumer products, home and domestic applications, industrial sector, marine, mass transports, mold manufacture railway sector etc.