Products in Polymers & Resins: Continuous Lamination

EcoPaXX® Q20HG60 is a black, unidirectional tape that offers 60% continuous glass fiber reinforcement and is heat stabilized. It can be processed using lamination, thermoforming, and winding techniques. Similar to EcoPaXX® Q20HC60, this product is also bio-based and can be measured using 14C. It is used in applications such as coolant expansion tanks, wheel housing parts, flooring, and door panels.

Akulon® K20HG60 is a polyamide 6 (PA 6) that serves as a resin, binder, and matrix material with the additional benefit of a low carbon footprint. Its features include cost-effectiveness, design flexibility, good strength, heat stabilization, high-temperature resistance, and light weight, making it suitable for various markets including automotive, electrical, electronics, and industrial applications.

espol™ 26.00 is a non-accelerated orthophthalic polyester resin that rapidly wets out reinforcements. It is formulated as a pultrusion grade, providing fast line speeds for products requiring high temperature exposure and a good finish. It can be used with all types of glass fibers, such as chopped strand mat, woven roving, and multi-axials. Typical applications include channels, angles, ladders, and special panels for appliances.

Crystic® Polyester Resin PDME 074 is an acrylic modified orthophthalic unsaturated polyester resin developed specifically for the manufacturing of maximum clarity roofing sheets by continuous sheeting process. It is ultra violet stabilized by the addition of special anti UV additives. The resin also contains acrylic monomers to reduce long term yellowing of the laminates.

ISO112 is an isophthalic unsaturated polyester resin type 1140 according to DIN 16946-2. ISO112 is particular indicated in outdoor application.

USP-EAGLE (RS18-65) is Unsaturated Polyester resin with high clarity, very good transparency as the refractive index of cured resin matches that of E-glass fiberit is used in the manufacturing of roofing sheets by continuous lamination.

Rhino Linings USA, Inc. 1382 Resin is a Low Modulus Flexible Epoxy Resin.1:1 highly flexible epoxy system. Retains flexibility at low temperature. 150% elongation, even when aged. Convenient 1:1 volumetric mix ratio.

DISTITRON® 514 Z1 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

LAM-135 / LAM-237 has Medium viscosity for good wet out of all synthetic composite fabrics and core materials.

Rhino Linings USA, Inc. 1310L-6 Resin allows the parts or tools to be used in many elevated service temperature environments. Low mixed viscosity quickly wets thick reinforcements. Convenient 4:1 volumetric mix ratio.

DISTITRON® 516 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

Rhino Linings USA, Inc. 1308NC Resin is a Economical Low Viscosity General Purpose Epoxy Resin. Low viscosity, economical general purpose epoxy resin with low odor. Used for fiberglass laminating and civil engineering applications.

LAM-125 / LAM-226 has Low viscosity for quick wet out of synthetic composite fabrics; especially effective with Kevlar® and carbon fiber.

Norsodyne® H-150 - good transparency, UV stabilized. Main applications areas are chemical industry, industrial sector etc.

LAM-135 / LAM-229 has Medium viscosity for good wet out of all synthetic composite fabrics and core materials.

ENYDYNE® C 66100 A - Unsaturated polyester resin in styrene,DCPD. It is used to produce furnitures and sanitary through casting,continuous laminating method.

LAM-125 / LAM-239 has Medium viscosity for good wet out of all synthetic composite fabrics and core materials.

LAM-125 / LAM-237 has Low viscosity for quick wet out of synthetic composite fabrics; especially effective with Kevlar® and carbon fiber.

Epoxy resin in the form of foil is designed for patent Letoxit Foil Technology (LF Technology).LF Technology is a dry lamination technique, which is suitable especially for production oflaminate structures with exactly defined reinforcement and resin content. If it is necessary toincrease the amount of resin in a certain place, it is also possible to combine epoxy resinLetoxit Foil with prepregs.Letoxit® LFX 060 can be applied for all types of reinforcement. Various types of glass,carbon or Kevlar fabrics or their combinations are mostly used. Unidirectional orientedreinforcements or 3D fabrics can be used, too. Letoxit® LFX 060 is suitable especially for productionof sandwich structures and honeycomb constructions. The produced laminate has very goodmechanical properties under stress in temperature range from -75°C to +100°C. Therefore itis used for manufacturing of aircraft parts and transport vehicles.

Rhino Linings USA, Inc. 1379 Resin is a Laminating and Tooling Epoxy Resin. Specialty epoxy system used for making large scale parts such as wind turbine rotors. Long working life with quick cure. High Tg without post cure.

Sicomin SR 1660 / SD 1305 is a laminating epoxy systems developed by Sicomin and adapted for the production of high performance composites. This systems developed for high service temperature tooling from 120°C up to over 200°C continuously depending on the chosen hardener.

NORSODYNE® S 83111 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating,hand lay up and spray up method.

EPOVIA OPTIMUM® RF 5000 UV - Urethane Epoxy Resin based vinyl ester in styrene. It is used to produce relining,cipp,pipes and tanks.

NORSODYNE® H 84233 L - Unsaturated polyester resin in styrene,halogenated. It is used to produce building panels,parts with high resistance to fire through hand lay up and spray up,continuous laminating method.

Rhino Linings USA, Inc. 1301 Resin is a Standard Undiluted Epoxy Resin. The standard press mold epoxy system for composite laminates and parts. All listed hardeners cure very quickly at standard process temperatures 160°F – 210°F.

LAM-125 / LAM-229 has Low viscosity for quick wet out of synthetic composite fabrics; especially effective with Kevlar® and carbon fiber.

Epoxy resin in the form of foil is designed for patent Letoxit Foil Technology (LF Technology). LF Technology is a dry lamination technique, which is suitable especially for production of laminate structures with exactly defined reinforcement and resin content. If it is necessary to increase the amount of resin in a certain place, it is also possible to combine epoxy resin Letoxit Foil with prepregs. Letoxit® LFX 035 can be applied for all types of reinforcement. Various types of glass, carbon or Kevlar fabrics or their combinations are mostly used. Unidirectionally oriented reinforcements or 3D fabrics can be used, too. LFX 035 is suitable especially for production of sandwich structures and honeycomb constructions. The produced laminate has very good mechanical properties under stress in temperature range from -75°C to +110°C. Therefore it is used for manufacturing of aircraft parts and transport vehicles.

DISTITRON® 454 AV7 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

NORSODYNE® S 81302 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating,hand lay up and spray up method.

DISTITRON® 515 A - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

Rhino Linings USA, Inc. 1337 Resin is a High Temperature Epoxy Novolac Tooling Resin. High temperature Novolac laminating and tooling epoxy. 350°F HDT after post cure.

Polydyne® 6020 - lamination resin, good adherence to acrylics substrates. Fast cycle curing. Main applications areas are building and construction, composites etc.

LAM-135 / LAM-226 has Medium viscosity for good wet out of all synthetic composite fabrics and core materials.

Norsodyne® R 55082 - standard isophthalic-neopentylglycol resin for hot curing. Main applications areas are building and construction, industrial sector etc.

DISTITRON® 518 A - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

NORSODYNE® S 15080 L - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.