Products in Parts & Shapes: Vacuum Bagging

Vist Composite SK2RF230-2 is a release film made from extruded polyester fiber using the highest technology available on the market, with precise process parameters in line quality control. The release film SK2RF230-2 is used in various manufacturing processes of polymer composite parts (autoclave production of composite materials, vacuum bag molding process).

Stretchlon® 200 vacuum bag film is a high elongation elastomeric film which can be used for cures up to 121°C and debulking operations. When parts with multiple contours are vacuum bagged, Stretchlon® 200 is an excellent choice as the high elongation will stretch into complex features. This film is not affected by low humidity environment. It is recommended for cures with epoxy and phenolic resins.

Vist Composite SK2RF230-1 is a high elongation release film used on difficult surfaces in processes at temperatures up to 230°C. This film is compatible with most resin systems and provides a glossy finish when used directly on the laminate. The product is used in various processes for the manufacture of parts from polymer composite materials.

Econolon® is an inexpensive nylon bagging film for low temperature cures, compaction or debulking.

Stretchlon® 700 vacuum bag film is a high elongation elastomeric film which is designed for cures up to 195°C. It is particularly suitable for applications where softness and elongation are required. The risk of bridging in the corners is highly reduced due to the elasticity of the film. This film stays soft even in a very low humidity environment. Stretchlon® 700 is recommended for cures with phenolic and epoxy resins.

Wrightlon® 5400 is a nylon bagging film with good elongation for cure temperatures up to 180°C

Wrightlon® 8400 is a high temperature nylon vacuum bagging film with more than 30 years worldwide proven performance. It is called out on many aerospace specifications for use temperatures up to 232°C. It is recommended for cures with phenolic resins.

Stretchlon® 850 is a high elongation film in tube form with a good softness which will conform to complex contours. This film is designed to remain more flexible than standard nylon films in low humidity conditions. Stretchlon® 850 is recommended for epoxy and BMI resins.

Vist Composite SK2RF316-1 is a photopolymer-plated floor, made from PTT, used for priming in the process of processing. On average, the temperature is maintained at 316°C. A flatbottomed floor can be used to heat a temperature-sensitive or high-temperature heating system. It provides the anti-aging characteristics of any type of temperature. The product is used in the process of drawing details from polymeric composition materials.

Ipplon® KM1300 is a vacuum bagging film with a good elongation and is suitable for cure temperatures up to 212°C. It is recommended for bagging applications where a higher softness is required. An excellent film for autoclave use or resin infusion.

Vist Composite SK2VF180-1 is a transparent nylon vacuum film with good elongation for processes up to 180°C. The product is used in various processes for the manufacture of parts from polymer composite materials.

Stretchlon® HT-350 is a higher temperature version of Stretchlon® 200. It can be used with all standard epoxy resin systems. The very high elongation makes this film easy to use on contour lay-ups and is an excellent choice for ply compaction. It is not recommended for autoclave processing. This film is not affected by low humidity conditions.

Wrightlon® 600V vacuum bagging film is designed for low cost, commercial applications yet still performs with high pressure autoclave cure cycles. It has good elongation and stays soft in low humidity conditions.

Vist Composite SK2RS230-2 is a 50 shore A hardness, uncured, highly elastic silicone sheet compound for use as a vacuum bag in the molding of aircraft industry parts. SK2RS230-2 has good strength characteristics, elasticity and high temperature resistance; effective in molding products of complex shapes. Widely used in vacuum and heat presses, and applied in the composite industry to produce composite parts. The product can be used at temperatures from -60°C (-76°F) up to 250°C (446°F).

Vist Composite SK2RF120-1 developed for use in the manufacture of products from polymer composite materials by contact molding, in infusion processes, in oven and autoclave molding. The film is suitable for use with a wide range of epoxy, polyester and vinyl ester resins, however we recommend that you test a small amount of film before making large items. low temperature separating film, specially.

Airdraw® Airdraw 2-DC is embossed with a diamond channel pattern which has been engineered specifically to provide rapid air removal from under the bag when vacuum is drawn. Airdraw 2-DC uses the original Airdraw 2 film which has been formulated to provide increased stiffness to assist in maintaining a breathable pattern, and is a contact material on some specifications. Airdraw 2-DC is not affected by environmental conditions and will not soften in high humidity and maintains the structure of the breathing channels for superior performance. It is designed primarily for ply compaction, with the benefit of not requiring a breather. It is embossed from one side of the film and under close examination the film has a flat side and a side with diamond shaped blisters. The blisters go against the part surface on top of a perforated release film.

Vist Composite SK2VF400-1 is a polyimide vacuum film with excellent electrical, thermal, physical and chemical performance in the temperature range from -265°C to +400°C. Due to this, this film finds application in a wide area. Product advantages include high dielectric strength, isotopicity, non-shrinkage, abrasion and scratch resistance. The product is used in various processes for the manufacture of parts from polymer composite materials.

Vist Composite SK2RF260-2 is a release film made from extruded FEP using the highest technology available on the market, with precise process parameters in line quality control. SK2RF260-2 release film is used in various polymer composite parts manufacturing processes (composite autoclave production, vacuum bag forming process).

Ipplon® DPT1000 is a high temperature nylon film for cure temperatures up to 246°C. It can be used when high temperature and high pressure are required. It is the recommended material for cures with phenolic resins.

Vist Composite SK2VF230-1 is a heat and wear resistant co-extrusion nylon vacuum film designed for the production of complex composite parts in the aerospace industry. The film is chemically resistant to almost all binders, including bismaleimide ones. The product is used in various processes for the manufacture of parts from polymer composite materials.

Wrightlon® 6400 is a nylon bagging film with a good elongation for cure temperatures up to 204°C.

Ipplon® DP1000 is a vacuum bagging film with a high elongation and is suitable for cure temperatures up to 212°C. It is recommended for bagging applications where a higher softness is required.

Vist Composite SK2RF155-1 is an ultra soft, high elongation polypropylene release film designed for medium temperature applications. Suitable for use with epoxy and phenolic prepregs up to 150°C. The product is used in various processes for the manufacture of parts from polymer composite materials.

Vist Composite SK2RF400-1 is a lightweight polyimide vacuum film with excellent electrical, thermal, physical and chemical performance from -265°C to +400°C. Due to this, this film finds application in a wide area. Product advantages include high dielectric strength, isotopicity, non-shrinkage, abrasion and scratch resistance. The product is used in various processes for the manufacture of parts from polymer composite materials.

Vist Composite SK2RS230-1 is a 50 shore A hardness, highly elastic sheet silicone compound for use as a vacuum bag in the molding of aircraft parts. SK2RS230-1 has good strength characteristics, elasticity and high temperature resistance; effective in molding products of complex shapes. It is widely used as a membrane in vacuum and thermal presses in the composite industry for the production of parts from composite materials. The product can be used at temperatures from -60°C to 250°C.

Airdraw Airdraw 2 is embossed with a ''cracked ice'' pattern which allows for rapid air removal when placed under vacuum. The film has been formulated to provide increased stiffness to assist in maintaining a breathable pattern. Airdraw 2 is not affected by environmental conditions and will not soften in high humidity, allowing superior breathability. It is designed primarily for ply compaction with the added benefits of not requiring a breather. It is embossed from one side of the film, under close examination; the film has a flat side and a raised side. The outer surface of the roll is the raised side. For best results, place the raised side against the part surface on top of a perforated release film.

Stretchlon® 800 vacuum bag film has the highest elongation from all nylon films and is suitable for cure temperatures up to 204°C. When parts with multiple contours are vacuum bagged, Stretchlon® 800 is a good choice offering to stretch into most areas. This film is designed to remain more flexible than standard nylon films in low humidity conditions. Stretchlon® 800 is recommended for epoxy and BMI resins.

Wrightlon® 7400 is a high temperature nylon film with high elongation which is suitable for cure temperatures up to 204°C. It is also offered with our embossed, cracked ice pattern making it a breather, release film and vacuum bag all-in-one.

Ipplon® WN1500 is a heat-stabilized nylon film for cure temperatures up to 246°C. It can be used when high temperature and high pressure are required. Ipplon® WN1500 is the recommended material for cures with phenolic resins.