Products in Composite Materials: FRP Boats

Crystic® Polyester Resin 489 is a thixotropic isophthalic polyester resin. When used with Crystic Gelcoat 65PA, they produce a matched performance system for molding boat hulls with outstanding durability and superior blister resistance. The outstanding wetting characteristics of Crystic 489 provide rapid impregnation with freedom from drainage.

Crystic® Polyester Resin 124PA is a medium-thixotropic, tropicalized, pre-accelerated, waxed unsaturated polyester resin. It is designed for rapid wetting and impregnation of reinforcements, making it ideal for building boats, water tanks, bath tubs, shower trays, and other products that require water resistance. The unwaxed version of this resin is also available.

Crystic® Polyester Resin 491 is a thixotropic, isophthalic polyester resin with good water and chemical resistance properties. It was developed for use in a wide range of critical applications that require toughness combined with water and chemical resistance. It is a versatile resin suitable for the fabrication of high-performance boat hulls intended for use in warm or tropical areas.

KPR 6615 by Kemrock Industries and Exports is an isophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6615 is used in gel coats and marine applications. Approved by Lloyd’s Register of Shipping.

Aekyung Chemical LSD-450 is a DCPD type UPR.

Lerpol Cristal 025 is a clear casting resin. Based on the deep experience and know how acquired in many years of dedication to tailor made solutions.

Lerpol R 813 VEFR is Vinylester flame retardant resins, preaccelerated, unfilled. In combination with Lavecoat FT, this resin enables the manufacturing of parts compliant with norm EN 45545, requirements R1 and R17.

Lerpol 383 is a DCPD resin for RTM. They are formulated with and without mineral fillers. Characterized by easy flow, good curing and excellent surface quality.

L900 is Multi-axial stitch felt. It is made of glass fiber untwisted roving laid in warp (0º), weft (90º) or diagonal (±45º) directions, or evenly spread glass chopped layers, stitched by polyester stitching threads. The weight is 200~2000g/㎡, and the width is 50~2600mm. Products are widely used in wind energy, boats, auto parts, construction engineering, medical equipment, sports and leisure and other fields.

Polyform Qu Adaxial is a quadaxial fabric with fibers aligned in four different directions 0°, -45°, 90°, +45°. Due to the strategic fiber alignment this product is often used in boat building and wind turbine blades.

Polyform Triaxial is a triaxial fabric available in both warp (0°, +45°, -45°) and weft (90°, +45°, -45°) configurations. Due to the complexity of fiber alignment this product is particularly suitable for applications such as access covers

Lerpol RS 10 FRN is a filled resins, tixo, preaccelerated suitable fo HLU. It is specifically designed for civil transportation ships interior parts.

Polymat Free Flow – PP250 is a mechanically stitch bonded 3-dimensional reinforcement fabric consisting of a polypropylene needle bonded core sandwiched between two layers of chopped strand E-glass fiber.

Lerpol 653 is a orthophtalic resin for casting. Based on the deep experience and know how acquired in many years of dedication to tailor made solutions.

SIMPREX® M745-200 is an advanced vinyl ester prepreg designed to provide a high performance-to-cost ratio. SIMPREX® M745-200 has a medium tack. It can be cured at lower temperature (205°F) and provides good adhesion to core materials such as Nomex® honeycomb, balsa and polyurethane foam. It is a great choice for many applications in the range of low to medium service temperature.

SIMPREX® 1255 are advanced vinyl ester prepreg designed to provide high strength and toughness retention at elevated temperature. SIMPREX® 1255 have a medium tack and are a great choice for many applications in the range of medium to high service temperature.

Lerpol 302 is a ISO-NPG high performance resin. They are formulated for rapid impregnation of fibers, no sagging on vertical surfaces and excellent throughcure. Various formulations are available, suitable for different thicknesses and different operating conditions. They are also available in low styrene emission version.

Lerpol 385 is a DCPD filled resin for RTM. They are formulated with and without mineral fillers. Characterized by easy flow, good curing and excellent surface quality.

SIMPREX® M745 is an advanced vinyl ester prepreg designed to provide a high performance-to-cost ratio. SIMPREX® M745 has a medium to high tack and provides good adhesion to core materials such as Nomex® honeycomb, balsa and polyurethane foam. It is a great choice for many applications in the range of low to medium service temperature.

SIMPREX® M940 is an advanced vinyl ester prepreg designed to provide a high performance-to-cost ratio. SIMPREX® M940 has a medium tack and provides good adhesion to core materials such as Nomex® honeycomb, balsa and polyurethane foam. It is a great choice for many applications in the range of low to medium service temperature.

MATLINE+ 201 is designed for use as a core material in dry and wet-on-wet hand layup and spray lamination production. It is proven as an effective alternative to glass fiber core layers, delivering consistent thickness without adding excess weight, improving rigidity whilst lowering overall manufacturing costs.

Lavecoat OR is an orthoPhtalic gelcoat for general purposes. Easy to apply and with very good hiding power. It is suitable for parts with moderate external weather ability requirements.

Polymat Free Flow – 180G PP Core is a mechanically stitch bonded 3-dimensional reinforcement fabric consisting of a polypropylene needle bonded core sandwiched between two layers of chopped strand E-glass fiber.

Natex UD 400 is a technical fabric in natural flax fiber designed from untwisted roving. It comes as Uni-directional Natex® Fabrics with Laize 1000 mm and as 400 g/m2.

SIMPREX® M730 is an advanced vinyl ester prepreg designed to provide a high performance-to-cost ratio. SIMPREX® M730 has a medium tack and provides good adhesion to core materials such as Nomex® honeycomb, balsa and polyurethane foam. It is a great choice for many applications in the range of low to medium service temperature.

Natex 2D 600 is a technical fabric in natural flax fiber designed from untwisted roving. It comes as Twill 3/3 Natex® Fabrics with Laize 1000 mm and as 600 g/m2.

Gillcore® HK is a Kelvar ® aramid fiber reinforced honeycomb which is coated with heat resistant phenolic resin. Kevlar ® honeycomb cores exhibit enhanced performance characteristics over Nomex® honeycomb core in the areas of weight, strength, stiffness and fatigue. Gillcore® HK provides a wide range of honeycomb types, including different cell sizes, cell geometries, paper thicknesses and densities, for commercial, military, aerospace and defense applications.

P02 Powder Chopped Strand Mat is made of randomly distributed chopped E6 glass strands held together by an powder binder. P02 is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. P02 is designed for use in hand lay-up, filament winding, compression molding and continuous laminating processes. Its end-use applications include boats, bath equipment, automotive parts, chemical corrosion resistant pipes, tanks, cooling towers and building components.

Natex UD 220 is a technical fabric in natural flax fiber designed from untwisted roving. It comes as Uni-directional Natex® Fabrics with Laize 1000 mm and as 220 g/m2.

Gillcore® HD is a meta-aramid fiber reinforced honeycomb which is coated with heat resistant phenolic resin. Gillcore® HD provides a wide range of honeycomb types, including different cell sizes, cell geometries, paper thicknesses and densities, for commercial and aerospace defense applications.

Natex P-Preg PLA P1/1 950 is a powder-coated fabric woven from flax fibers that are pre-impregnated with thermoplastic resins. It comes as NATTEX® P-Preg, PolyLactic Acid with 1000 mm Width and pre-preg fabrics uni-directional in natural fibers with flax of 900 g/m2.

KPR 6600 by Kemrock Industries and Exports is an isophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6600 is used in laminations and marine applications. Approved by Lloyd’s Register of Shipping.

Fiberglass (A/Asia) Sales Pty 342S VE Resin is a general purpose type resin used in the manufacture of fiberglass reinforced plastic components, and other applications where it is resistant to a broad range of acid base and salt solutions up to 100 Deg. C. 342S Vinyl Ester Resin is normally supplied thixotropic and promoted to be catalyzed by either Interox SR or Butanox M50 catalysts. Other MEKP catalysts should be first tested before used for the development of a satisfactory level of cure. Where exposure to severe corrosive environments is to be encountered, post curing of laminates is strongly recommended.

SIMPREX® M730-200 is an advanced vinyl ester prepreg designed to provide a high performance-to-cost ratio. SIMPREX® M730-200 has a medium tack. It can be cured at lower temperature (205°F) and provides good adhesion to core materials such as Nomex® honeycomb, balsa and polyurethane foam. It is a great choice for many applications in the range of low to medium service temperature.

Senosan® C60FR-2 EG SOFTFEEL MATT has a multi-layer composite with a base layer of abs/ pc-compound with flame retardant properties (halogen free) and a top layer of matt TPU. Surface with soft feel haptics.

Natex P-Preg PP P1/1 900 is a powder-coated fabric woven from flax fibers that are pre-impregnated with thermoplastic resins. It comes as NATTEX® P-Preg, Polypropylene with 1000 mm Width and pre-preg fabrics uni-directional in natural fibers with flax of 900 g/m2.