Products in Cleaning Ingredients: Degreaser

Demelan® VPC, classified within the ethoxylates chemical family, is available in a liquid physical form. Its applications encompass chemical manufacturing within the industrial sector, surface care in-home care, and industrial cleaning in both institutional and industrial care under the home, institutional and industrial (household, industrial, and institutional) sector.

BIO-SOFT® 35-7, renowned for its nonionic surfactant properties, excels in delivering superior detergency, emulsification, and solubilization functionalities. As a highly versatile product, it serves as a potent degreaser and wetting agent, addressing a wide array of application requirements across various industries with remarkable efficiency and effectiveness.

BIO-SOFT® N-900 is a nonionic surfactant blend renowned for its cleaning, degreasing, and detergent properties. It can serve as a replacement for np-9 and be formulated into both concentrates and ready-to-use products. This versatile product remains stable in aqueous acidic and alkaline solutions. It also aligns with the u.S. Epa safer choice program's surfactant screen and is listed on cleangredients.Org.

BIO-SOFT® DR-13 is a versatile nonionic surfactant ideal for degreasing, wetting, and solubilization. It is well-suited for outdoor cleaners in applications like car and boat washes. Approved for direct release according to the u.S. Epa safer choice standard, it adheres to safety and environmental standards.

BIO-SOFT® N-400 is a nonionic surfactant blend with a low hlb, serving purposes in emulsification and boosting degreasing alongside higher hlb surfactants. It finds its place in hard surface applications, industrial cleaners, and detergents. It exhibits rapid wetting characteristics in comparison to np-4 and can be a substitute for nonylphenol ethoxylates.

BIO-SOFT® N-600 is a nonionic surfactant blend with an hlb (hydrophilic-lipophilic balance) value of 10.6. It serves purposes such as wetting, emulsification, and as a degreasing booster within industrial cleaners, detergents, and paint additives. In comparison to np-6 (nonylphenol ethoxylate), BIO-SOFT® N-600 demonstrates faster wetting properties and can serve as a replacement for nonylphenol ethoxylates. It meets the stringent requirements of the u.S. Epa safer choice program's surfactant screen and is listed on cleangredients.

BIO-SOFT® N-901 is a nonionic surfactant blend with an hlb of 12, making it a remarkable cleaner and detergent for hi&i applications. Its degreasing capabilities render it suitable for heavy-duty cleaning tasks. Additionally, it can function as an np-9 replacement. This product aligns with the u.S. Epa safer choice program’s surfactant screen and is listed on cleangredients.

Lutensol® XL 40 is available as a 100% active product and is suitable for machine floor cleaning as a foam controlling and degreasing agent. The level of residual alcohol is comparatively very low when compared to regular alcohol ethoxylates with the same degree of ethoxylation. It has a HLB value of 10.5 and is listed on the Safer Choice label. The final surfactant choice will be dependent on the formulation.

Glucopon® 215 UP is a short-chain APG sold as a liquid of 63.5% concentration. This mid-chain APG surfactant has moderate hydrotropic ability and high foam, providing good primary cleaning. It is 100% derived from renewable resources and is used as a mild degreaser and foaming/stabilizing surfactant that won't damage even floor finishes. It has excellent gloss retention and plastic compatibility, and contains no biocide for preservation. It is listed on the EPA’s Safer Chemical Ingredients List and is approved for direct release to the environment.

Lutensol® XL 50 is a 100% active product with a comparatively lower level of residual alcohol than regular alcohol ethoxylates with the same degree of ethoxylation. It is suitable for use as a foam control and degreasing agent in machine floor cleaning.

Glucopon® 625 UP is a long-chain APG surfactant available as an approximately 50% viscous liquid. It functions as a mild degreaser and foaming/stabilizing surfactant, is listed on Safer Choice, and is 100% natural carbon. It is mild to the skin and can synergistically reduce skin irritation caused by anionic surfactants. It has synergy with lactic acid to increase the dish clean plate count and contains no biocide for preservation. Additionally, it is listed on the EPA's Safer Chemical Ingredients List.

Glucopon® 600 UP is a long-chain APG surfactant available as an approximately 50% viscous liquid. It works in combination with fatty soap to act as a mild degreaser and a foaming/stabilizing surfactant. It is mild to the skin and can synergistically reduce the skin irritation caused by anionic surfactants. It has a synergistic effect with lactic acid to increase the clean plate count. Furthermore, it contains no biocide for preservation and is listed on the EPA’s Safer Chemical Ingredients List.

Lutensol® XP 70 is a 100% active product suitable for machine and manual floor cleaning as a low-foaming degreasing agent. It is readily biodegradable, has a lower tendency to form gel compared to longer-chain alcohol ethoxylates, and is listed on Safer Choice. The final surfactant choice, however, would be formulation-dependent.

Lutensol® XP 79 is capable of producing very high initial foam, making it ideal for institutional cleaning and sanitation. It is available in both 85% active product and 85% aqueous solution forms. In solid form, it is slightly yellow, while in liquid form, it is slightly pasty. The product contains no preservatives and is recommended for use with Glucopon® surfactants to synergistically reduce skin irritation in food service and kitchen hygiene applications.

Glucopon® 420 UP is 100% derived from renewable resources. It is mild to the skin and can synergistically reduce the skin irritation caused by anionic surfactants. It has excellent gloss retention, little to no streaking, and excellent plastic compatibility. This product contains no biocide for preservation and is listed on the EPA’s Safer Chemical Ingredients List.

ADM d-Limonene Ultra High Purity (302002) is derived from the peels of sweet oranges (Citrus sinensis). It is specifically recommended for use in adhesive resins, flavors, fragrances, solvents, and degreasing agents. High-purity d-limonene is 99.4% pure, meaning it is considerably low in impurities. This leads to cleaner, more neutral products. It is most often used in fine fragrance applications.

ADM d-Limonene Technical Grade (301000) is derived from the peels of sweet oranges (Citrus sinensis). It is specifically recommended for use in adhesive resins, solvents, and degreasing agents. d-Limonene is the major component of the oil extracted from the citrus peel during the citrus juicing process. With its attractive citrus aroma, d-limonene is a naturally occurring biodegradable solvent and degreaser that can be used safely and effectively in a wide range of products.

ADM d-Limonene High Purity (302001) is derived from the peels of sweet oranges (Citrus sinensis). It is specifically recommended for use in adhesive resins, flavors, fragrances, solvents, and degreasing agents. High-purity d-limonene is 99.4% pure, meaning it is considerably low in impurities. This leads to cleaner, more neutral products. It is most often used in fine fragrance applications.

ADM d-Limonene Food Grade (302000) is derived from the peels of sweet oranges (Citrus sinensis). It is specifically recommended for use in flavors, fragrances, solvents, and degreasing agents. d-Limonene is the major component of the oil extracted from the citrus peel during the citrus juicing process. With its attractive citrus aroma, d-limonene is a naturally occurring biodegradable solvent and degreaser that can be used safely and effectively in a wide range of products.

Berol 226 is all purpose cleaner and degreaser which is ready to formulate with builders and water with high efficiency.

Arquad T-50 is a cationic surfactant based on tallow amine - Tallowtrimethylammonium chloride.

Berol 226 SB is a nonionic/cationic surfactant blend for high performance cleaning and degreasing.

Ethomeen O/12LC is a tertiary amine ethoxylate, based on a primary oleyl amine.

Berol 609 is a nonionic surfactant designed for nonyl phenol 9 replacement.

Witconate NAS 88 sodium octane sulfonate is a low foaming hydrotrope, efficient degreaser and wetting agent for many applications. It is direct release, bleach stable and DFE approved. Listed on CleanGredients and Safer Choice.

Berol 266 is a narrow range non-ionic surfactant based on a synthetic primary alcohol with >80% linearity.

Berol 226 SA is a all purpose cleaner and degreaser which is ready to formulate with builders and water with high efficiency.

Berol LFG 61 is a alcohol ethoxylate and alkylglucoside mix, complete surfactant package, low foaming nonionic surfactant blend.

Berol DGR 81 is an environmentally improved non-ionic surfactant blend with very good degreasing properties.

Berol LS is an optimized surfactant-nanosilica blend for degreasing, with no streaking and anti-soiling benefits.

Ethomeen T/12 is an ethoxylated tallow amine.

Ethomeen O/12 is a tertiary amine ethoxylate, based on a primary oleyl amine.

Berol Nexxt is a high-performance non-quat hydrotrope with cosurfactant properties that enhance cleaning and improve the stability of formulated products in hard surface and laundry applications. It is a clear liquid that is soluble in ethanol, isopropyl alcohol, and water.

Berol 185 is a nonionic, readily biodegradable surfactant that offers improved surface wetting, paint stability and color acceptance properties in water borne paints. It is a non label product, easy to handle and with good foam control.

Berol SurfBoost AD15 is an amide ethoxylate.

AG 6206 is a low foaming alkyl glucoside, non-ionic surfactant, based on a short chain fatty alcohol and glucose.