Products in Metals, Alloys & Complexes: Corrosion Resistance

Alcoa Excalibar® 6013-T651 Aluminum has the potential for higher machining speeds and feed rates, easier deburring,ease of clearing 'chips' and better finishes. It is also stronger tand harder than 6061-T651.

ZINC ALLOY 190 is copper hardened zinc that have good strength and excellent ductility. It is a general purpose alloy.

VDM® Powder 718 CTP is the powder variant of an age-hardenable nickel-chromium-iron-molybdenum alloy for use in additive manufacturing. Hardenability is achieved by means of admixtures of niobium, titanium and aluminum.

Alcoa Toolrite® 2011-T8 Aluminum has good machinability, especially free-cutting qualities and good mechanical properties. It has excellent surface finish capability. The T451 temper offers good deep drilling characteristics.

Valimet Aluminum Silicon Powder S-15 is made from the Eutectic Alloy 4047 (11-13% Si). This is well suited for corrosion and erosion-resistant coatings, catalytic reactions, and metal matrix composites. It corresponds to Pratt & Whitney, General Electric, Boeing, Rolls Royce, and other commercial specifications.

Valimet Aluminum Silicon Powder S-2 is made from the Eutectic Alloy 4047 (11-13% Si). This is well suited for corrosion and erosion-resistant coatings, catalytic reactions, and metal matrix composites. It corresponds to Pratt & Whitney, General Electric, Boeing, Rolls Royce, and other commercial specifications.

VDM® Powder 625 is the powder variant of a nickel-chromium-molybdenum-niobium alloy for use in additive manufacturing with excellent resistance to a variety of corrosive media.

Alcoa Deltalloy® 4032-T86 Aluminum has good machinability and drilling characteristics when using single point or multi-spindle screw machines. It has excellent surface finish using polycrystalline or carbide tooling. Superior wear resistance of the material eliminates the need for hard coat anodizing. It has high strength and low thermal expansion.

Valimet Aluminum Silicon Powder S-20 is made from the Eutectic Alloy 4047 (11-13% Si). This is well suited for corrosion and erosion-resistant coatings, catalytic reactions, and metal matrix composites. It corresponds to Pratt & Whitney, General Electric, Boeing, Rolls Royce, and other commercial specifications.

Gulf Ferro Alloys Ferro Vanadium A is produced using an Aluminothermic process using flux such as calcium oxide or calcium fluoride plus aluminum , V2O5, and iron scrap. Other processes used to produce ferrovanadium include electro-aluminothermic, aluminothermic and electro-silicothermic.

Cobalt Metal or Electrolytic Cobalt Rounds are a high purity, primary form of the metal produced by electrowinning. The unique button-shape makes this product safe, convenient to handle and easy to transfer from drums. Cobalt is an important constituent of alloys with high temperature oxidation, corrosion resistance properties and a critical component of a wide variety of magnetic alloy and hard metals. The consistent purity and convenient form of Cobalt Metal or Electrolytic Cobalt Rounds are distinct advantages of this premium product.

VDM® Powder 780 is the powder variant of an age-hardenable nickel-cobalt-chromium alloy for use in additive manufacturing. Hardenability is achieved by means of admixtures of niobium, titanium and aluminum.

Valimet Aluminum Silicon Powder S-10 is made from the Eutectic Alloy 4047 (11-13% Si). This is well suited for corrosion and erosion-resistant coatings, catalytic reactions, and metal matrix composites. It corresponds to Pratt & Whitney, General Electric, Boeing, Rolls Royce, and other commercial specifications.

Alcoa Toolrite® 2011-T4 Aluminum has good machinability, especially free-cutting qualities and good mechanical properties. It has excellent surface finish capability. The T451 temper offers good deep drilling characteristics.

HPN™ Pure Nickel Foil are produced directly from electrolytically obtained pure nickel cathodes, the absence of pores and inclusions can be guaranteed, as can gas-tightness and an extremely low trace element content. Surface quality and mechanical properties can be customized according to our customers' specifications.

Gulf Ferro Alloys Ferro Titanium is an alloy produced from iron and titanium. In induction furnaces, titanium is melted with steel or iron. Ferro titanium has high corrosion resistance, high strength and low density. It is highly reactive with sulfur, carbon, oxygen, nitrogen to form insoluble compounds.

Valimet Aluminum Silicon Powder S-8 is made from the Eutectic Alloy 4047 (11-13% Si). This is well suited for corrosion and erosion-resistant coatings, catalytic reactions, and metal matrix composites. It corresponds to Pratt & Whitney, General Electric, Boeing, Rolls Royce, and other commercial specifications.

Alliance Magnesium Alloy AZ91D is the most commonly used magnesium die cast alloy. It is the strongest rated magnesium die cast alloy and makes up the bulk of current use. Thanks to its mechanical properties and high corrosion resistance, this alloy’s range of applications is becoming increasingly wider. It is most commonly used for casings, covers, brackets, chainsaw parts, portable tools and electronic parts.

AZSA 37 203 is used in Pressure die-cast parts or gravity cast in metallic molds which requiere elevated resistance to traction and firmness. Die-cast parts can easily be painted, copper-plated, nickel-plated, chromium-plated, etc.

VDM® Powder CoCr F75 is a non-magnetic cobalt-chrome-molybdenum-based super alloy for use in additive manufacturing.

AZSA 37 101 is used in Galvanizing and other protective coatings. Anodes for zinc-electroplating and anodes for cathodic protection. Zinc poder, zinc oxide and other chemical products. Zinc base alloys. Brass. Rolled zinc.

VDM® Powder 59 is the powder variant of a nickel-chromium-molybdenum alloy developed by VDM Metals, which has particularly low concentrations of carbon and silica and is characterized by excellent corrosion resistance.

AZSA 37 205 is used in Pressure die-cast parts or gravity cast in metallic molds which requiere elevated resistance to traction and firmness. Die-cast parts can easily be painted, copper-plated, nickel-plated, chromium-plated, etc.

Alcoa Deltalloy® 4032-T651 Aluminum has good machinability and drilling characteristics when using single point or multi-spindle screw machines. It has excellent surface finish using polycrystalline or carbide tooling. Superior wear resistance of the material eliminates the need for hard coat anodizing. It has high strength and low thermal expansion.

AZSA 37 202 is used in Pressure die-cast parts or gravity cast in metallic molds which requiere elevated resistance to traction and firmness. Die-cast parts can easily be painted, copper-plated, nickel-plated, chromium-plated, etc.

Rhenium Alloys Rhenium Powder 99.99% are widely used in the production of high density, high temperature parts for aerospace, defense, energy and X-ray device industries.

Valimet Aluminum Silicon Powder S-5 is made from the Eutectic Alloy 4047 (11-13% Si). This is well suited for corrosion and erosion-resistant coatings, catalytic reactions, and metal matrix composites. It corresponds to Pratt & Whitney, General Electric, Boeing, Rolls Royce, and other commercial specifications.

Rhenium Alloys Rhenium Rod 99.99% Pure offers high ductility and strength, designed for various applications such as satellite positioning nozzles, aerospace propulsion components and other demanding parts that must withstand extreme thermal shock, high temperature and stress applications.

Atlantic Equipment Engineers Inc AL-100 is a nodular shaped, gray metal powder. A silvery white, light, durable and functional metal, making it one of the most critical engineering and manufacturing materials. Aluminum is one of the lightest metals to exist. It is particularly known for its strength, flexibility, and corrosoion resistance. Since it cannot become magnetized, it makes for a great electiricty conductor, and readily makes alloys with almost any metal. It can be found in a diverse range of applications, from planes, tranes and automobiles to telephones and everryday objects, many of which would simply not exist without aluminum.

Asturiana de Zinc, S.A.U. ZnAl –CGG is used in Galvanizing, alloying, metalizing, solders, Zn-Al master alloy, batteries.

Gulf Ferro Alloys Ferro Vanadium B is produced using an Aluminothermic process using flux such as calcium oxide or calcium fluoride plus aluminum , V2O5, and iron scrap. Other processes used to produce ferrovanadium include electro-aluminothermic, aluminothermic and electro-silicothermic.

Rhenium Alloys Rhenium Powder 99.9% Pure are widely used in the production of high density, high temperature parts for aerospace, defense, energy and X-ray device industries.

Alcoa Toolrite® 2011-T3 Aluminum has good machinability, especially free-cutting qualities and good mechanical properties. It has excellent surface finish capability. The T451 temper offers good deep drilling characteristics.

VDM® Powder X is the powder variant of a nickel-chromium-molybdenum-iron alloy with cobalt and tungsten additions.

Valimet Aluminum Silicon Powder S-25 is made from the Eutectic Alloy 4047 (11-13% Si). This is well suited for corrosion and erosion-resistant coatings, catalytic reactions, and metal matrix composites. It corresponds to Pratt & Whitney, General Electric, Boeing, Rolls Royce, and other commercial specifications.

VDM® Powder 699 XA is the powder variant of a metal dusting corrosion and oxidation resistant alloy for use in additive manufacturing. This is achieved by high chromium and aluminum content.