Products in Oligomers

Cosmonate JG-50K is low adhesion degree Special Polymeric MDI which is used in manufacturing of electrolysis paint hardener. Cosmonate JG-50K is liquefied product in high temperature, so easy to treat for storage up to 10, as a Solvent Free type, mixed with one volume MDI of 4,4-Diphenyl-methane dilsocyanate, of which more than two volume, three volume, four volume's oligomer, has maximum 20cps(25 ) of adhesion degree and average 2.3~2.4 of sensory gear.

SP 260 is a multifunctional polyester acrylate oligomer with 5% TMPTA. UV/EB cure coating applications for heat resistance and high compatibility with various kinds of resin.

SE 1702 is a bisphenol A epoxy acrylate oligomer which has been modified with fatty acid. This product is characterized by its flow and leveling, and its outstanding pigment wetting qualities.

Designer Molecules PEM-665 is a methacrylate terminated polyester oligomer that has low color and low cure shrinkage. The backbone of this product consists of a statistical distribution of low molecular weight polyester segments. A representative structure is shown above. The cycloaliphatic dibasic ester residues as well as the methacrylate end-groups resist hydrolysis. This oligomer has approximately 33% less cure shrinkage than BisGMA at 100% conversion. Unlike BisGMA, it is not based upon a bisphenol A backbone and therefore does not have the potential to act as an endocrine disruptor.

SU 584 is a di-functional aliphatic urethane acrylate oligomer with 1,6-hexanediol diacrylate. This product is characterized good flexibility, good toughness, excellent durability and non-yellowing properties.

PHOTOMER® 6720 is a low viscosity hexa-functional aromatic urethane acrylate oligomer.

MPD Industries UVP 0810 99 is difunctional acrylated polyester oligomer. It has good lithographic behavior pigment wetting and fast cure response. It is recommended for use in lithographic and flexographic ink formulations.

bossin® W-21Cimproves the curing rate the formula and decrease the dosage of photoinitiator in color formula.

Anhui Elite Industrial AR-01 is soluble in ester, ketone and aromatics and insoluble in 200# gasoline and alcohol. Or it can be soluble in alcohols, esters, Ketones and aromatics at normal temperature. is a viscous yellow transparent acid, at higher temperatures, the carboxyl group on a variety of reactions can occur, a common reaction with amines into amides, containing traces of dimer acid and a small amount of monomer acid Three poly acid.

KELLOMER STA-2330 is a star branched acrylate. Films of STA-2330 cured by UV/EB exhibit very high hardness and excellent scratch resistance to film and plastic.

Bisphenol A Epoxy Methacrylate possesses a fast cure speed that forms a stiff polymer with above average hardness.

bossin® W-151 has excellent flexibility and toughness, curing fast.

KELLOMER STA-2340 is a star branched acrylate. Films of STA-2340 cured by UV/EB exhibit very high hardness and excellent scratch resistance to film and plastic.

CE CRYL 800 is a 80% Epoxy Acrylate Oligomer with 20% monomer (DPGDA).

SU 594 is a tri-functional aliphatic urethane acrylate oligomer with 1,6-hexanediol diacrylate. This product is characterized good stain resistance, good abrasion resistance and non-yellowing properties.

PL-7113 is a non-yellowing urethane that exhibits a high degree of elongation. It also has a high rate of conversion with low average shrinkage stress. PL-7113 can be added to formulations to add toughness.

bossin® W-100 has a high UV curing activity with no solvents.

SE 148 is a difunctional epoxy acrylate oligomer with 20% TMPTA. This product is characterized by its low viscosity, fast cure response, high gloss, excellent solvent resistance and high surface hardness.

Elite UVP6000 is a flexible hybrid ester acrylate

PL-7130 is a low color urethane that is a viscous liquid at room temperature. Upon cure, PL-7130 creates a flexible yet tough polymer with percent elongation near 80%. PL-7130 is non-yellowing and can be used in formulations to add flexibility.

SU 588is an aliphatic urethane triacrylate oligomer diluted with approx. 10% of ethoxy-ethoxyethyl acrylate (EOEOEA).developed for UV/EB cure coating applications requiring excellent abrasion resistance, good toughness, fast cure response and the non-yellowing properties typical of an aliphatic urethane.

RESILAC 167L is a Modified acrylic polyol represent a special group of amorphous polyols, obtained by radical copolymerisation of acrylic monomers such as acrylic or methacrylic acids and esters. The source of hydroxyl groups in these acrylic polyols is the utilization in the radical copolymerisation reaction of hydroxyalkyl acrylates or hydroxyalkyl methacrylates as comonomers. The acrylic polyols are used in high-performance polyurethane (PU) coatings mainly for automotive and marine coatings.C&E offers a range of high performance, high solids and low VOC acrylic polyols. specialty chemical manufatcurer.

SU 570 is a di-functional aliphatic urethane acrylate oligomer. This product is characterized good flexibility and toughness, low viscosity, fast cure and non-yellowing properties.

Basis® F 39 has Adipic Acid base used as adhesives, PUR hot melts, PU coatings, PU shoe soles, elastomers, PU flexible foam.

Elite UVP6300-DP20 is a flexible hybrid ester acrylate which is BPA-free and contains 20% DPGDA.

SU 574B is a trifunctional aliphatic urethane acrylate oligomer with 1,6-hexanediol diacrylate. This product is characterized good abrasion and stain resistance, good flexibility, toughness and non-yellowing properties.

BisGMA/Triethyleneglycol Dimethacrylate (70/30)

PHOTOMER® 6009 is a proprietary, non yellowing, aliphatic urethane acrylate oligomer developed for radiation curable systems. This premium oligomer of low viscosity eliminates the need to melt out the oligomer prior to use. PHOTOMER® 6009 is an excellent film former and it exhibits excellent light stability and outstanding haze, scratch and abrasion resistance.

RESILAC 570 is a Modified acrylic polyol represent a special group of amorphous polyols, obtained by radical copolymerisation of acrylic monomers such as acrylic or methacrylic acids and esters. The source of hydroxyl groups in these acrylic polyols is the utilization in the radical copolymerisation reaction of hydroxyalkyl acrylates or hydroxyalkyl methacrylates as comonomers. The acrylic polyols are used in high-performance polyurethane (PU) coatings mainly for automotive and marine coatings.C&E offers a range of high performance, high solids and low VOC acrylic polyols. specialty chemical manufatcurer.

UVP 0835 is hexafunctional acrylated polyester oligomer. It adds fastcure response, hardness and abrasion resistence to UV/EB curable inks coatings and adhesives.

SE 1500 is a low viscosity version of SE 1701 epoxy acrylate oligomer. SE 1500 improves flexibility and toughness. This product is characterized by its fast cure response, excellent solvent resistance and high surface hardness.

Elite UVP6010-PE30 is a flexible hybrid ester acrylate with 30% PEA.

Elite UVP6070-IB20 is a flexible hybrid ester acrylate with 20% IBOA.

Astrocure® 78 Oligomer is a unique, low viscosity reactive, cycloaliphatic oligomer, especially tailored for application in ultra-violet/electron beam (UV/EB) radiation cured coatings. The product can be thinned with a variety of reactive monomers including multi-functional and diluent acrylate monomers. The oligomer is air drying in thin film applications and contains no aromatic groups.

Designer Molecules BMI-5000 Toluene is an imide-extended bismaleimide oligomer that exhibits excellent toughness in the cured state with an intermediate cross-link density. It is soluble in aromatic solvents. It is an amber, waxy solid at room temperature and can be cast as a hot melt or from solution to form pliable, non-tacky films. This maleimide functional oligomer can be cured thermally, via UV irradiation, or in the presence of free-radical initiators to form a tough thermoset. BMI-5000 is supplied as a 50% solids solution in toluene. The material can also be supplied as a solid slab, powdered solid or in alternative solvents.