Products in CASE Ingredients: Primer

SILRES® BS 290 CF is a solventless silicone concentrate based on a mixture of silane and siloxane. Like SILRES® BS 290, it can be diluted with organic solvents. Dilute solutions of SILRES® BS 290 CF in organic solvents serve as high-quality general-purpose water repellents for impregnating and priming mineral and highly alkaline substrates.

VINNOL® E 15/40 A is a hydroxyl-containing copolymer comprising approximately 84 wt.% vinyl chloride (VC) and 16 wt.% acrylic acid esters. Its primary application lies in serving as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

VINNAPAS® 754 ED is a construction dispersion for two-component dry mix mortars, specifically suited for cement admixtures and two-component cementitious waterproofing membranes. VINNAPAS® 754 ED belongs to the product class VINNAPAS® ED. It is based on a highly flexible terpolymer of vinyl acetate, ethylene, and vinyl ester, enhancing the adhesion and flexibility of mortars.

VINNAPAS® 547 ED (ULS) is a versatile polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of plasticizers, organic solvents, or formaldehyde donors. The residual monomer content is below 1000 ppm. VINNAPAS® 547 ED (ULS) offers several advantages in a wide range of building chemical and construction applications. It exhibits high compatibility with cement, and its influence on cement setting is marginal.

NEXIVA® GP 225 is a dispersible polymer powder that primarily consists of vinyl acetate and ethylene. It is specifically formulated as a versatile binder suitable for a wide range of applications across various industries, including coatings and adhesives. However, its potential uses are not limited to these industries alone.

VINNAPAS® 240 HD is a multi-purpose construction dispersion for liquid and paste with cement-free binder technology, specifically suited for primers, ready-to-use tile adhesives, and one-component dispersion-based water-proofing membranes. It is based on a flexible copolymer of styrene and acrylate and belongs to the product class VINNAPAS® HD, which means that it provides a remarkable hydrophobic effect in addition to excellent adhesion even under wet conditions.

VINNAPAS® 224 HD is a multi-purpose construction dispersion for liquid and paste with cement-free binder technology, specifically suited for primers, ready-to-use tile adhesives, and one-component dispersion-based water-proofing membranes. It is based on a hard copolymer of styrene and acrylate and belongs to the product class VINNAPAS® HD, which means that it provides a remarkable hydrophobic effect in addition to excellent adhesion even under wet conditions.

GENIOSIL® WP 1 is a polyether-based silane-terminated polymer suitable as a binder in moisture-curing formulations. It differs from conventional silylated polymers due to its high reactivity, which results from the structural proximity of the nitrogen atom to the silicon atom in the dimethoxy(methyl)silyl-methylcarbamate group (alpha-effect). It hydrolyzes in the presence of moisture to form a stable siloxane network initiated by mild catalysis, rather than heavy metal ions.

SILRES® BS 290 is a solventless silicone concentrate based on a mixture of silane and siloxane. It can be diluted with organic solvents. Dilute solutions of SILRES® BS 290 in organic solvents are high-quality general-purpose water repellents for impregnating and priming mineral and highly alkaline substrates.

VINNAPAS® 550 ED is a multi-purpose construction dispersion, specifically suited for cement admixtures, the formulation of two-component cementitious waterproofing membranes, as well as the production of primers. The dispersion is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® ED, which means that it enhances the adhesion and flexibility of mortars.

VINNAPAS® 540 ED (ULS) is a medium-viscosity polymer dispersion based on vinyl acetate and ethylene. VINNAPAS® 540 ED (ULS) is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The dispersion is characterized by high bonding strength due to its high Mw PVOH content.

GENIOSIL® GF 9 is an organofunctional silane with various applications. It is commonly used in building & construction adhesives, Flooring installation, Industrial adhesives, Interior paints & coatings, and waterproofing membranes. GENIOSIL® GF 9 is particularly effective in glass-fiber reinforced or mineral-filled polymers as well as a surface modifier.

HALOX® BW-100 is a white, nonrefractive, tannin stain-inhibiting pigment used in protective coating systems and has been specifically designed as a tannin stain inhibitor, providing performance and compatibility in a variety of resin systems such as acrylic latexes, vinyl acrylic latexes, styrenated acrylic latexes, and solventborne alkyds.

HALOX® CW-314 is a heavy metal-free, non-toxic, anti-corrosive pigment designed for use in waterborne and solvent-borne protective coating systems. It is particularly suitable for systems where 21 CFR 175.300 approval or compliance with ANSI or NSF standards is required. HALOX® CW-314 is highly effective in improving the infrared (IR) reflectance and thermal emissivity of elastomeric roof coatings. It enhances the total solar reflectance (TSR) while maintaining dirt pick-up resistance (DPUR) and preventing mildew growth. It can be used alone or in combination with other non-toxic corrosion inhibitors and mineral pigments in the formulation of environmentally friendly specialty paints.

Dragonbural Polyvinyl Butyral (B-60 grade) is a high-quality PVB resin, which can be used widely in industries. Its main application has been in the paper printing ink, glue metal protection primer, badminton, ceramic color paper, aluminum foil adhesive, electronic ceramic, fiber treating agents, and cellulose sponges.

HALOX® CW-22/221 is a white, non-refractive, corrosion-inhibiting pigment used in protective coating systems. It is not recommended for use in immersion or semi-immersion environments. HALOX® CW-22/221 is recommended for use in primer systems based on traditional solvent alkyd technology. It can effectively be formulated into such resins as medium- and long-oil alkyds. HALOX® CW-22/221 is compliant with ASTM D7089, which specifies the requirements for calcium borosilicate pigments for use in paints.

Dragonbural Polyvinyl Butyral (B-B20 grade) is a high-quality PVB resin, which can be used widely in industries. Its main application has been in the paper printing ink, glue metal protection primer, badminton, ceramic color paper, aluminum foil adhesive, electronic ceramic, fiber treating agents, and cellulose sponges.

Dragonbural Polyvinyl Butyral (B-70 grade) is a high-quality PVB resin, which can be used widely in industries. Its main application has been in the paper printing ink, glue metal protection primer, badminton, ceramic color paper, aluminum foil adhesive, electronic ceramic, fiber treating agents, and cellulose sponges.

Dragonbural Polyvinyl Butyral (B-10 grade) is a high-quality PVB resin, which can be used widely in industries. Its main application has been in the paper printing ink, glue metal protection primer, badminton, ceramic color paper, aluminum foil adhesive, electronic ceramic, fiber treating agents, and cellulose sponges.

HALOX® Z-PLEX 111 is a corrosion-inhibiting pigment used in protective coating systems that is highly versatile and more cost-effective than commercial zinc phosphate. HALOX® Z-PLEX 111 can provide a higher level of corrosion protection than commercial zinc phosphate when used as an equal-weight replacement.

HALOX® 650 is an organic corrosion inhibitor primarily designed for coatings and primers on metal surfaces. It is specifically formulated for use in solvent-borne or powder-coating applications to provide long-term corrosion protection. HALOX® 650 can be used in a variety of applications, including coil coatings, resins such as thermoplastic acrylics or epoxies, powder coating systems such as polyester or TGIC, acid-catalyzed thermosetting systems such as melamine or urea-formaldehyde, and wash (etch) primers based on PVB.

HALOX® Z-PLEX® 750 is an inorganic and organic hybrid corrosion inhibitor primarily designed for coatings and primers on metal surfaces. HALOX® Z-PLEX® 750 is specifically designed for use in a variety of solventborne or waterborne applications to cost-effectively provide the traditional function of an inorganic corrosion inhibitor with the benefits of an organic corrosion inhibitor.

HALOX® BW-191 is a white, non-refractive, corrosion-inhibiting pigment used in protective coating systems. It is recommended for use in most waterborne systems, such as latexes and water reducibles, and due to its lower oil absorption, it can also be effective in anticorrosive high-solids coatings. On the other hand, HALOX® BW-111 is recommended for use in solventborne epoxy systems, both conventional and high-solids.

HALOX® 570 LS is a ready-to-use liquid version of our popular organic corrosion inhibitor, HALOX® 570, which requires no dilution. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is especially effective along weld seams to prevent galvanic corrosion. HALOX® 570 LS may be used in formulations based on water-based acrylics, epoxy esters, 2-component epoxy, water-reducible alkyds, and water-based polyurethanes. HALOX® 570 LS may be used in both water-based primers and direct-to-metal topcoats. In direct-to-metal coatings, HALOX® 570 LS has a minimal effect on gloss reduction.

Gelest (N,N-DIMETHYLAMINOPROPYL)-AZA-2-METHYL-2-METHOXYSILACYCLOPENTANE, 95% (SID3546.93) is a cross-linking cyclic azasilane. This product functions as an adhesion promoter and coupling agent.

Gelest AMINOPROPYL/METHYLSILSESQUIOXANE IN AQUEOUS SOLUTION (WSA-7011) is a water-borne amino alkyl silsesquioxane oligomer. This product functions as an adhesion promoter and coupling agent.

HALOX® CW-491 is a white, non-refractive, heavy metal-free pigment used as a corrosion inhibitor in protective coating systems. It is versatile and can be used with a variety of solvent and waterborne resin systems. The recommended loading levels for HALOX® CW-491 vary depending on the type of system used. For waterborne systems, the recommended loading levels range from 5–8% based on the total formula weight, while for solventborne systems, the recommended loading levels range from 7–12% based on the total formula weight.

HALOX® 550 is a liquid organic-inorganic sol-gel corrosion inhibitor designed for corrosion protection in thin film coatings such as water and solvent-based finishes, high gloss DTM, conventional primers, acrylic clear coats, fast-drying lacquers, wash primers, anti-fingerprint coatings, and conversion coatings. It also increases hydrophobicity and is pH stable, making it compatible with both waterborne and solventborne coatings.

HALOX® 630 is a liquid organic corrosion inhibitor for solvent-borne protective coatings on metal surfaces. It may be used in solventborne clear or pigmented coatings and in systems such as 2-pack epoxy systems, high-solids epoxy esters, alkyds, acrylic resins, and 2 pack polyurethane primers. However, in bake systems, the temperature should not exceed 150°C. It should be noted that yellowing may be observed with reactive isocyanates. HALOX® 630 provides superior corrosion resistance even over poorly prepared surfaces, such as adherent rust or oil contamination.

Dragonbural Polyvinyl Butyral (B-30 grade) is a high-quality PVB resin, which can be used widely in industries. Its main application has been in the paper printing ink, glue metal protection primer, badminton, ceramic color paper, aluminum foil adhesive, electronic ceramic, fiber treating agents, and cellulose sponges.

Dragonbural Polyvinyl Butyral (B-40 grade) is a high-quality PVB resin, which can be used widely in industries. Its main application has been in the paper printing ink, glue metal protection primer, badminton, ceramic color paper, aluminum foil adhesive, electronic ceramic, fiber treating agents, and cellulose sponges.

HALOX® SZP-391 JM is an efficient and versatile corrosion-inhibiting pigment. It is a white, nonrefractive, corrosion-inhibiting pigment used in protective coating systems. HALOX® SZP-391 JM is equally effective in such resins as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride-based latexes and is recommended for use in a wide variety of resin systems.

Dragonbural Polyvinyl Butyral (B-50 grade) is a high-quality PVB resin, which can be used widely in industries. Its main application has been in the paper printing ink, glue metal protection primer, badminton, ceramic color paper, aluminum foil adhesive, electronic ceramic, fiber treating agents, and cellulose sponges.

Gellner Wonderblock is a new binder technology for waterborne stain-blocking primers. This product forms a resistant barrier to water-soluble tannins and prevents topcoats from staining. The polymer backbone discovered by our research chemists is resistant to tannin and nicotine stains. It forms an impenetrable barrier that outperforms all other attempts at solving the bleeding of stains.

Ottopol K-12T is a cationic acrylic emulsion that is used as a rust-converting primer. It converts the rust of the coating application to a black iron oxide barrier, which can be further top-coated with water- or solvent-based paints. This product does not contain tannic acid, oxime chelates, phosphates, or phosphoric acid.

Ottopol SF-49 is a self-crosslinking acrylic emulsion that can be formulated into a corrosion-resistant primer or semi-gloss paint. The dry film has outstanding water resistance and will not blush even after prolonged exposure to water.