Products in CASE Ingredients: Polyols

AltroColor PU 3000 Color Pastes are based on a polyol ether binder and have been developed particularly for the coloring of polyurethane ether systems. As our AltroColor PU 3000 Color Pastes Series are based on a reactive/crosslinkable binder, a full integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 3131 is blue PB 15:1 colored.

Bakelite® CS62-003_D resins serve as excellent crosslinking agents for epoxy, polyester, alkyd and other resin systems to form coatings with good adhesion and chemical resistance properties. Crosslinking takes place either under high temperature (-180°C) or via acid catalysts. They are used with epoxy and polyester resins to produce chemically resistant coatings for food contact and anti-corrosion coatings.

PETOL 28-3B is a tri-functional highly reactive polyether polyol, with a 6000 nominal molecular weight designed for obtaining high resilience flexible polyurethane foams. Due to the high content of EO, the product may become opalescent at temperatures below 30°C. PETOL 28-3B results from the addition of propylene oxide and ethylene oxide to glycerin, under base catalysis.

DICAP® 2020 is a Acid Functional Saturated Polyester Polyol.

TRI-REZ® Polyol 1230-90 is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® Polyol 1230- 90 makes it an ideal polyol for formulating high solids and waterborne polyurethane resins.

Puranol D 280 is synthesized with propylene glycol, glycerin, and epoxide. It is used in polyurethane elastomers, adhesives, coatings, waterproof coatings, chemical grouting materials, shoe soles, and non-cellular polyurethane applications such as coating, adhesives, sealants and elastomers.

AFEX™ SB23C is a base semi-drying Oil called as Saybean having one conjugated double bonds.

TRI-REZ® Polyol 1030-60 is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® Polyol 1030- 60 makes it an ideal polyol for formulating high solids and waterborne polyurethane resins.

Petol PZ 480-4G polyether polyol is a medium functional polyether polyol designed to obtain rigid polyurethane foams. It is used as a standard polyol for various rigid applications such as rigid block foams, pipes and panels insulation, through continuous and discontinuous processes.

Bakelite® PF 7365 LP resins serve as excellent crosslinking agents for epoxy, polyester, alkyd and other resin systems to form coatings with good adhesion and chemical resistance properties. Crosslinking takes place either under high temperature (-180°C) or via acid catalysts. They are used with epoxy and polyester resins to produce chemically resistant coatings for food contact and anti-corrosion coatings.

RESILAC 170R is a Modified acrylic polyolr represent a special group of amorphous polyols, obtained by radical copolymerisation of acrylic monomers such as acrylic or methacrylic acids and esters. The source of hydroxyl groups in these acrylic polyols is the utilization in the radical copolymerisation reaction of hydroxyalkyl acrylates or hydroxyalkyl methacrylates as comonomers. The acrylic polyols are used in high-performance polyurethane (PU) coatings mainly for automotive and marine coatings.C&E offers a range of high performance, high solids and low VOC acrylic polyols. specialty chemical manufatcurer.

AltroColor PU 3000 Color Pastes are based on a polyol ether binder and have been developed particularly for the coloring of polyurethane ether systems. As our AltroColor PU 3000 Color Pastes Series are based on a reactive/crosslinkable binder, a full integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 3033 is ultramarine blue colored.

Petol PS 500-4G is a polyether polyol obtained by propoxilation of glycerin - sorbite mixture under catalyst conditions.

AltroColor PU 3000 Color Pastes are based on a polyol ether binder and have been developed particularly for the coloring of polyurethane ether systems. As our AltroColor PU 3000 Color Pastes Series are based on a reactive/crosslinkable binder, a full integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 3040 is rose colored.

Petol PP 401 is a non-reactive polymer polyol, with about 40% solid content and 3500 average molecular weight of standard polyol, designed to obtain enhanced load bearing flexible slabstock foams. PETOL PP 401 can be used individually or blended with other polyols.

PETOL PZ 360-4G is a medium functional polyether-polyol with low viscosity. PETOL PZ 360-4G is used especially in polyol blends with high water levels for rigid polyurethane foam applications (wood imitation, conventional insulation applications).

Rokopol® iCan 2432 is a specialist, base polyether polyol dedicated to production of one-component high-efficiency foams (OCF). It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 145-160 mgKOH/g, and dynamic viscosity within the range of 150-250 mPas at temp. 25°C.

PETOL PP 2725 is a reactive polymer polyol with about 25% solid content and an approximate 4700 average molecular weight of standard polyol, designed to obtain high resilience flexible polyurethane foams (HR).

Purol® R-06 has Phthalic Andydride base used as adhesives, PUR hot melts, PU coatings, PU rigid foam, Elastomers.

Drokryl™ 7840 is a hydroxyl functional acrylic polyol resin formulated for cross linking with polyisocynates at ambient temperature.

Polem A OF is a branched, castor oil-based polyol emulsion.

Jiahua Chemicals G 310 is synthesized with propylene glycol, glycerin, and epoxide. It is used in polyurethane elastomers, adhesives, coatings, waterproof coatings, chemical grouting materials, shoe soles, and non-cellular polyurethane applications such as coating, adhesives, sealants and elastomers.

Petol C 2106 is a polyol blend formulated for the manufacture of fireproofing rigid polyurethane foams, blown with water. This polyol blend includes surfactant and fireproofing agent.

POLIkol 3000 is a product belonging to the group of polyoxyethylene glycols (PEG with an average molecular weight of 3000), INCI name: PEG-60. The commercial product is available as white to light yellow wax. The solidification point of the product is approximately 55 °C. The product is freely soluble in water, low aliphatic alcohols, ethyl ether and chloroform.

CARPOL® EDAP-800 is an ethylene diamine initiated polyether polyol. The resulting material has a nominal functionality of four and a typical hydroxyl number of 800. This tetrol is polymerized with ethylene and propylene oxide and has a mild catalytic nature. This polyol’s functionality makes it optimal for use in rigid foams as a crosslinking modifier. In addition, Carpol® EDAP-800 can also be used as a curative for most C.A.S.E. applications.

PETOL 400-3 is a polyoxypropylene triol, 420-average molecular weight. It is a low viscosity polyol used in polyol blends for rigid polyurethane foam applications. If blended with other PETOL polyols, it can vary physical and mechanical characteristics of semi-rigid and rigid polyurethane foams. PETOL 400-3 is also used in the production of adhesives and coatings.

AFEX™ CR30C is a base drying oil called as Corn having no double bond.

ELAPOL 4010 A is a linear, saturated polyester polyol by Elachem. It contains aliphatic acid & diethylene glycol (DEG).

The system OLTPUR type S 2106 is made of two components: -polyolic component PETOL C 2106 -difenyl methane-di isocyanate (crude MDI) Polyolic component PETOL C 2106 it's a mixture of polyols with catalyser, fireproofing agent, water and 1,1-dichlorine-1-fluoroethane (HCFC 141b) as blowing agent.

Merginol 903 is a branched Polyester/-etherpolyol. It is free of aromatics.

METabolic Explorer PDO (propanediol 1.3) is produced biologically from glycerol, a by-product of biodiesel production. It is a chemical base compound with exceptional physical qualities. Also, it is inexpensive and environment friendly. Used in coatings for sports industry.

Petol PP 201 is a non-reactive polymer polyol, with a content of about 20% solid substance and with 3500 average molecular weight of base polyol, designed for the production of high hardness flexible slabstock foams. It is a BHT-free product and can be used with or without auxiliary blowing agent to produce a wide range of foam grades, from low to high density.

Protactinium Chemical NAS -1099 is a waterborne polyester polyol (9.9% sodiosulfoisophthalic acid (Na-SIPA)). Suitable for water dilutable polyurethane (PU) and two-component (2K) systems.

ELAPOL 6520 B by Elachem is a linear, saturated polyester polyol. It contains aliphatic acid, 1,6-hexanediol and (NPG) neo-pentyl glycol.

Basis® F 31 has Adipic Acid base used as adhesives, PUR hot melts, PU coatings, PU shoe soles, elastomers, PU flexible foam.