Products in CASE Ingredients: Plasticizer

Kanatol 900 (DINP) is almost colorless and odorless oily liquid, free of foreign materials which is slightly soluble in water ( 0.285mg/L at 24C ) but soluble in alcohols, hexane etc. It is miscible and compatible with all the monomeric plasticizers of PVC compounding.

Soyanol™ 1000E is water-based additive for paints or stains, highly compatible with many chemistries, including most latex, acrylic and urethane emulsion systems, it helps develop high stability emulsions, increases open times, improves freeze / thaw performance over industry leading coalescents, also does double duty as coalescent and plasticizer, it is efficient and cost effective solution which has typical usage 2%-7%.

Kanatol 200 (DEP) is a colorless, transparent oily liquid , slight aromatic odor, As a solvent for nitro-cellulose and cellulose acetate in manufacturing of varnishes & paints.

Kanatol 3430 (E) is almost colorless and odorless oily liquid, free of foreign materials which is in soluble in water but soluble in alcohols, hexane etc. It is miscible and compatible with all the monomeric plasticizers of PVC compounding.

Kanatol 1056 is almost colorless and odorless oily liquid, free of foreign materials which is, slightly insoluble in water but soluble in alcohols, hexane etc. and is miscible and compatible with all the monomeric plasticizers of PVC compounding.

Polybut™ 6 is a low molecular weight conventional polybutene.

Polybut EM MM 12(A-75) is a water-based emulsion of medium molecular weight polyisobutene.

POLIkol 4500 flakes is a product belonging to the group of polyoxyethylene glycols (PEG with an average molecular weight of 4500), INCI name: PEG-100. The commercial product is available as white to light yellow wax. The solidification point of the product is approximately 55 °C. The product is freely soluble in water, low aliphatic alcohols, ethyl ether and chloroform.

KVIS 100 is the trade name of Kothari’s polyisobutylene with molecular weight ranging from 1700 to 1800. KVIS 100 is widely used as a viscosity index improver in engine oil additives and grease, and in high molecular weight PIBSA manufacturing.

POLIkol 4500 is a product belonging to the group of polyoxyethylene glycols (PEG with an average molecular weight of 4500), INCI name: PEG-100. The commercial product is available as a white to light yellow wax. The solidification point of the product is approximately 55 °C. The product is freely soluble in water, low aliphatic alcohols, ethyl ether and chloroform.

OSW-102 with the characteristics of narrow distribution of MW, high melting point, low viscosity, fast solidification, has good compatibility with EVA resin and petroleum resin, has good thermal stability, will not change color in a few hours under 180 ° C baking. Suitable to be used in hot melt coating. In the PVC processing, the OSW-102 can effectively reduce the plasticizing torque, extend the plasticizing and thermal stability time, it has excellent anti-adhesion and mold releasing effect. It is suitable to be used in the plastic products processing of pipe, mill, and buckle, and it is also can be used in PVC thermal stabilizers.

PETOL 28-2LM is a PPG, with a molecular weight of 4000, with low unsaturation, synthesized with double metal cyano complex catalyst. The product is acidified slightly with phosphoric acid.

Bisomer® LMA97 SP is a hydrophobic methacrylate monomer.

Polybut EM 200(A-50) is a water-based emulsion of low molecular weight polybutene.

Velsiflex® 328 is a blend of dipropylene glycol and diethylene glycol dibenzoate in an approximately equal ratio. Velsiflex 328 is primarily known for its exceptional performance in polyvinyl acetate adhesives. It displays excellent wet tack, set times and open time performance. It also improves adhesion to acrylic latex caulks and is a high-solvating PVC plastisol.

Polybut™ 80 is a low molecular weight conventional polybutene.

Nayakem Di Octyl Sebacate (DOS) is the typical high quality cold resistance PVC plasticizers with high plasticizing efficiency and low color distortion. DOS has favorable lubricating action when processing and is often added with phthalate to make cold resisting agricultural film, cable clad, artificial leather, outdoor water tube, and frozen food packaging film and so on. It can also be used in many synthetics rubber where low temperature performance is required and cold resisting plasticizer for Nitro Cellulose, Ethyl Cellulose, Polystyrene, Vinyl Chloride Copolymer and so on.

Rit-Chem PIB 4H is polyisobutylene. Possesses low molecular weight. Used in hot melt and solvent-based adhesive and sealant applications.

Polybut™ 10 is a low molecular weight conventional polybutene.

Brimopol PEG 3000 has a functionality of thickener lubricant dispersant.

Mamta Polycoats Acetyl Tributyl Citrate (ATBC) is an efficient and preferred primary plasticizer for sensitive applications. A well-suited and recommended plasticizer not only for medical devices, toys, food packaging, and inks, but also for technical applications such as artificial leathers, textile coatings, floorings, and automotive engineering.

Nayakem Di Butyl Phthalate (DBP) is a plasticizer used in manufacturing of Resins and polymers such as polyvinyl chloride (PVC). DBP is also used in adhesives, printing inks, sealants, nitrocellulose paints, film coating and glass fibers. DBP is used in cosmetics as follows: a perfume solvents and fixative a lubricants for aerosol valves, an antifomer, skin emollient and a plasticizer in nail polish.

Nayakem Di Cyclo Hexyl Phthalate (DCHP) is used as a plasticizer in heat sealable films and as coplasticize in poly vinyl chloride. It is used in print inks and Special inks. DCHP used as a Primary or a secondary plasticizer for many polymers including nitrocellulose, ethyl cellulose, chlorinated rubber, poly vinyl acetate and poly vinyl chloride.

Bisomer® LMA (Lauryl Methacrylate) is a hydrophobic methacrylate monomer.

Glyplast 206/8 NL are low molecular weight polymers that incorporated into a polymeric matrix offer outstanding properties such as migration and extraction resistance, weather stability, high temperature performance, high mechanical properties, negligible toxicity and good environmental compatibility. Due to these remarkable properties, polymeric plasticizers are generally adapted to undergo the stricter legislation norm for Food Contact Materials (EU and FDA)

Brimopol PEG 300 has a functionality of Lubricant, Antifreeze, Humectant, Solubilizer and Plasticizer.

SINTOPOL DP 90/73% E.A.

Asahi Kasei Tuftec™ H1521 is particularly designed as a modifier to increase flexibility of polypropylene (PP). Its excellent compatibility makes H1521 super-finely dispersed into PP. PP and H1521 blends provides transparent and flexible extruded products such as sheets, films and tubes. The blends are also applicable to injection molding due to its high MFR. It has excellent adhesion, which is suitable for the use of adhesive layer of protective films with hot-melt and pressure sensitive characteristics. H1521 meets USP Class Ⅵ standards. It may be used for medical applications after a special agreement with Asahi Kasei.

Kolon Industries HIKOREZ® LP-5100 is a pale yellow low molecular liquid resin obtained from the polymerization of C5 aliphatic olefin and diolefin generated in the thermal-cracking process of naphtha. This product is specialized for improving the adhesive strength of pressure sensitive adhesive (PSA), and also can be used as a plasticizer. .

Nayakem Di Butoxy Glycol Phthalate (DBGP) is a plasticizer for cellulose resins and some vinyl resins (PVC, PVAc) and acrylic Resins. It is a softener and processing aid for chlorofin rubber, nitrile butadiene rubber, styrene butadiene rubber.

Nayakem Di Octyl Adipate (DOA) is a highly efficient plasticizer designed to impart excellent low temperature properties to polyvinyl chloride. Its excellent wetting characteristics make it desirable for plastisols use where low plasticizer content, coupled with low viscosity, and good fusion characteristics are necessary. It is primary plasticizers for PVC with exceptional cold resistance. Its superiority in compatibility with PVC, thermal stability, light stability and water resistance makes it find wide use in PVC films, wire coverings, garden hoses etc..

Kanamoll 650 is a vegetable oil-based light colored secondary plasticizer. ESBO is manufactured from soybean oil through the process of epoxidation. It is been used widely as plasticizer because of high numbers of epoxidized carbon-carbon double bonds. The epoxide group is more reactive due to double bonds, thus making it a good hydrochloric acid scavenger and plasticizer.

Soyanol™ 5000X-HS is viscosity and flow modifier for solvent borne coatings, non-phthalate plasticizer, it is compatible with most conventional resin systems and exempt solvents, provides excellent dispersion characteristics in paints and stains, deep penetration is excellent for wood and concrete applications, it improves leveling, increases open time for better cure rates and smoother finishes and it is more efficient than other options (use less, get more).

Mamta Polycoats Acetyl Tri(2-Ethylhexyl) Citrate (ATEHC) is an outstanding plasticizer for technical applications, especially where no or minimum fogging characteristics and lowest migration behavior are needed. Excellent compatibility with PVC makes it a well-suited and recommended plasticizer for cables, artificial leathers, textile coatings, floorings, car interiors, and many other industrial applications.

Polybut EM 0 (NI-15) is a water-based emulsion of low molecular weight polybutene.

SINTOPOL MD 100/80% E.A. is a 80% solution in ethylacetate of a urethane polymer, not reactive, with an excellent adhesion on the threated polyolefines.