Products in Additives: Natural Rubbers (NR)

HDK® H20 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H20 is used as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics, and other applications. It also serves as a reinforcing filler in elastomers, particularly silicone-elastomers. Additionally, HDK® H20 acts as a free flow additive in the production of powder coatings.

HDK® H2000 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H2000 is primarily used as a reinforcing filler in silicone-elastomers, enhancing their properties. Furthermore, it serves as a free flow additive in the production of technical powders and finds application as an additive in antifoam agents.

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 120 - 100W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

T-Det® PEG 6000 is a water-dispersible granule anti-caking agent for liquid detergents. With low toxicity and good lubricating properties, it is also used as a plasticizer and humectant in industrial adhesives.

T-Det® PEG 4000 is a versatile ingredient used in cleaning, agrochemical, and CASE applications. With properties like water solubility and low toxicity, it functions as a solvent, anti-caking agent, and plasticizer.

Flytac 102 - 100 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 102 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 111 - 101 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 102 - 100F is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 188 is a light yellow aliphatic hydrocarbon resin. It is polymerized by high-purity 1.3-pentadiene and designed as a tackifier in hot melt/pressure-sensitive adhesives. This product has good heat resistance, light odor, and good compatibility with polymers like SBS, SIS, SEBS, EVA, SBR, NR, and polyisobutylene.

Dragonox® CPL is an antioxidant with strong tinting strength. It is mainly used as a compound that protects tints and non-dirt dyes. This product may also be applied in polymer processing to enhance stability. Application Areas Apparels Automotive interiors Medical devices and assemblies Healthcare packaging Coated paper and paperboard

Flytac 111 - 301 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Z-NOX® CPL is a polymeric phenolic antioxidant meticulously engineered to elevate natural rubber and latex domains. Dressed in a pristine white powder guise, Z-NOX® CPL stands as a robust guardian, exhibiting exceptional antioxidant stability within ABS, tackifiers, and adhesives. A paragon of excellence, this product remains steadfast in its commitment - non-discoloring, non-staining, and with low volatility.

VANQUISH™ 100 Antimicrobial is based on the active agent N-butyl-1,2-benzisothiazolin-3-one (BBIT) and is recommended for use in tough and demanding applications especially those exposed to high UV levels. It is a broad spectrum antimicrobial used to prevent fungal, bacterial, and algal spoilage of polymers such as PVC, polyurethane, silicone, polyolefin, polyester, and acrylic articles such as shower curtains, coated fabric, vinyl wall coverings, floor coverings, appliance gaskets, wall and floor coatings, and swimming pool, pond, and ditch liners.

SperseStab™ 2702 is a highly efficient antioxidant with a molar efficiency twice that of BHT and a significantly higher TGA. It is effective in non-color-critical adhesive applications and can be combined with other antioxidants and UV stabilizers. With its relatively high TGA, SperseStab™ 2702 can be used in a variety of applications, from PCMO to hydraulics, metalworking, and other lubricating systems. It can also be used in natural and synthetic elastomers, as well as resins and adhesives.

Trapylen® 186 X is a medium-chlorinated polypropylene dissolved in xylene. Characterized by a higher chlorine content compared to other grades, it exhibits relatively good compatibility with other resins and polymers, along with excellent pigment wetting. The cured film produced by Trapylen® 186 X boasts high gloss and remarkable chemical and aging resistance. Its primary advantage lies in its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, to a limited extent, polyethylene.

Trapylen® 186 S is a chlorinated polypropylene with a higher chlorine content compared to other Trapylen® grades. It demonstrates good compatibility with other resins and polymers, excellent pigment wetting, and forms a high-gloss, chemically resistant film. The primary merit of Trapylen® 186 S lies in its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, with limitations, polyethylene.

Trapylen® 186 EAC is a chlorinated polypropylene dissolved in ethyl acetate. With a higher chlorine content compared to other Trapylen® grades, it exhibits good compatibility with other resins and polymers, excellent pigment wetting, and results in a high-gloss, chemically resistant film. The main advantage of Trapylen® 186 EAC is its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, with limitations, polyethylene. However, its resistance against fatty oil and grease is limited.

Trapylen® 187 EAC is a chlorinated polypropylene dissolved in ethyl acetate. It possesses a slightly lower chlorine content compared to the similar Trapylen® 186 EAC but maintains good compatibility with other resins and polymers, along with excellent pigment wetting. The cured film exhibits high gloss and very good chemical and aging resistance. The primary advantage of Trapylen® 187 EAC lies in its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, with limitations, polyethylene. However, its resistance against fatty oil and grease is limited and may be compensated for by using it with low-chlorinated Trapylen® grades.

Trapylen® 187 S is a chlorinated polypropylene characterized by a higher chlorine content compared to other Trapylen® grades. This feature results in good compatibility with other resins and polymers, coupled with excellent pigment wetting. The cured film exhibits high gloss and very good chemical and aging resistance. The primary advantage of Trapylen® 187 S lies in its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, with limitations, polyethylene. However, its resistance against fatty oil and grease is limited and may be compensated for by using it with low-chlorinated Trapylen® grades.

Lansperse PPD 01 is used as a dispersing agent and carrier for pigment master-batches. Lansperse PPD01 is thermostable and is hydrophobic to aid compatibility with carriers such as polymers, thermoplastics and rubber. Lansperse PPD01 disperses color evenly throughout pigments concentrate to ensure even color distribution through bulk systems.

FloraRez® 785 is a glycerol ester derived from highly hydrogenated gum rosin. This thermoplastic resin exhibits a very pale color and demonstrates remarkable resistance to oxidation and color degradation. It serves as a valuable tackifying resin component in diverse applications such as adhesives, inks, coatings, and personal care formulations, particularly in scenarios where oxidative stability is essential.

FloraRez® 485 is a high-quality glycerol ester derived from partially hydrogenated gum rosin that has undergone purification to ensure exceptional taste and odor characteristics. It is meticulously protected from contaminants. This pale-colored thermoplastic resin possesses a low acid number. In numerous countries, it is considered suitable for incorporation into chewing gum bases as an ingredient. Additionally, it serves as a resin component in a wide range of applications, including adhesives, inks, coatings, and personal care formulations, where oxidative stability is needed.

Teckros® R100 is a light- colored, stabilized pentaerythritol ester of gum rosin used in a wide range of hot melt, pressure sensitive, other adhesives, and many other applications where rosin ester performance and pleasant odor are important. Unlike tall oil-derived rosin esters, Teckros® R100 is free from meaningful sulfur content resulting in low odor of a pleasant character.

Teckrez® HM-1000 is a Styrenated Hydrogenated hydrocarbon resin used where water-white color, excellent heat stability, narrow molecular weight distribution and a degree of polarity are beneficial. HM-1000 enables formulation of premium EVA and mPE-based hot melt adhesives providing better specific adhesion when compared to standard hydrogenated hydrocarbon resins. Other applications include hot melt PSA's, premium aerosol adhesives, elastomeric sealants, wax compounding, medical adhesives, and others.

FloraRez® 440 is a tacky, viscous liquid resin that has a light color and is highly resistant to oxidation and discoloration. It is produced through the esterification of partially hydrogenated gum rosin with triethylene glycol. This versatile and heat-stable liquid tackifier can be used in a wide range of formulations.

FloraRez® LRL liquid resin is the methyl ester of partially hydrogenated gum rosin. It is a transparent, clear to pale yellow, tacky, viscous liquid that has been specially processed to minimize product odor. FloraRez® LRL is commonly used to plasticize, add tack to, or modify the properties of a variety of formulations. In fragrance compounds, it is used as a diluent, carrier, and fixative.

RIANOX® 1520 is a multifunctional liquid phenolic antioxidant for processing and long-term thermal stabilization of elastomers, plastics and related products.

A mercapto functional organic adhesion promoter synthesized using a stabilized bimetal precursor. The product is supplied in ethylene glycol to aid in rapid dispersion and solubilization of the active component in polymer matrices.

RIANOX® 1520LR is a multifunctional liquid phenolic antioxidant for processing and long-term thermal stabilization of elastomers, plastics and related products.

SYLVALITE RE 110L rosin ester is a light-colored, high softening point, pentaerythritol ester of tall oil rosin, which has been formulated to provide excellent heat and aging stability. When compounded in Ethylene Vinyl Acetate (EVA) hot melt adhesives it provides excellent color stability when compared with other tackifiers of its type.

SYLVARES TR B115 polyterpene resin is a biorenewable tackifier made from selected terpene monomers. This product can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. The aliphatic nature of this product allows compatibility with the mid-block of styrene-isoprene-styrene block copolymers while limiting interaction with the styrenic endblocks providing a balance of tack, peel, cohesive strength, and heat resistance.

RELEASE K100 H DIL. 2 is a polyvinylcarbamate in solvent solution.

Puyang United Chemical C5 Petroleum Resin O-1310 is 100% C5 Aliphatic hydrocarbon resin with key feature of lower softening point and narrow molecular weight distribution which brings PSA excellent wetting and tack property. The major usages of O‐1310 are tackify a variety of adhesive polymers including SIS, EVA, natural rubber, synthetic polyisoprene, polyisobutylene, butyl rubber, AO and APAO.