Products in Additives: Tackifier

Acronal® A 107 serves as a tackifying admixture in the production of dispersion-based construction adhesives and expandable joint sealing tapes. It's an aqueous dispersion containing a polyacrylic acid butyl ester with low cohesion. This dispersion is neutralized with ammonia and is manufactured without the use of APEO, or formaldehyde. It exists in liquid form, presenting a white color, and is almost odorless.

Flytac 120 - 100W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 188 is a light yellow aliphatic hydrocarbon resin. It is polymerized by high-purity 1.3-pentadiene and designed as a tackifier in hot melt/pressure-sensitive adhesives. This product has good heat resistance, light odor, and good compatibility with polymers like SBS, SIS, SEBS, EVA, SBR, NR, and polyisobutylene.

Flytac 102 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 111 - 301 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 107 is a derivative of gum rosin obtained by chemical treatment to reduce the abietic acid content. It is used as a tackifier for pressure-sensitive adhesives, manufacture of SBR and other synthetic rubbers, and is an important component for making potassium soaps and ABS, etc.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 102 - 100 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 102 - 100F is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 106 - F is a medium hard, pale thermoplastic resin designed primarily as a tackifier for various types of polymer and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. For cosmetic applications such as mascara, the INCI name for Pentalyn H-E is Pentaerythrityl Hydrogenated Rosinate.

Flytac 106 - P is a medium hard, pale thermoplastic resin designed primarily as a tackifier for various types of polymer and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. For cosmetic applications such as mascara, the INCI name for Pentalyn H-E is Pentaerythrityl Hydrogenated Rosinate.

Flytac 111 - 101 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 191’s is obtained by hydrogenating cracked C5 to achieve high-quality, multi-purpose, water-white thermoplastic hydrocarbon resin. This C5 hydrogenated hydrocarbon resin is mainly used for hot melt adhesives, and hot melt pressure sensitive adhesive tackifiers. It has good thermal stability, low odor, and good compatibility with SIS, APAO, etc.

FloraRez® LRL liquid resin is the methyl ester of partially hydrogenated gum rosin. It is a transparent, clear to pale yellow, tacky, viscous liquid that has been specially processed to minimize product odor. FloraRez® LRL is commonly used to plasticize, add tack to, or modify the properties of a variety of formulations. In fragrance compounds, it is used as a diluent, carrier, and fixative.

FloraRez® 440 is a tacky, viscous liquid resin that has a light color and is highly resistant to oxidation and discoloration. It is produced through the esterification of partially hydrogenated gum rosin with triethylene glycol. This versatile and heat-stable liquid tackifier can be used in a wide range of formulations.

Teckrez® C95-99L is an aromatic (C9) based resins with aliphatic (C5) modification to provide cost effective performance in EVA hot melts and other applications.

FloraRez® 485 is a high-quality glycerol ester derived from partially hydrogenated gum rosin that has undergone purification to ensure exceptional taste and odor characteristics. It is meticulously protected from contaminants. This pale-colored thermoplastic resin possesses a low acid number. In numerous countries, it is considered suitable for incorporation into chewing gum bases as an ingredient. Additionally, it serves as a resin component in a wide range of applications, including adhesives, inks, coatings, and personal care formulations, where oxidative stability is needed.

Teckrez® C95-109L is an aromatic (C9) tackifier resin, aliphatic (C5) modified with improved color and odor. C5 modification provides improved EVA (Ethylene Vinyl Acetate) compatibility making Teckrez® C95-109L an effective tackifier in EVA hot melt adhesives. It is also very effective with SBS block polymers, SBR,and other polymers with aromatic content.

Bomar™ BR-744SD is a difunctional, aliphatic polyester urethane acrylate offering excellent adhesion, flexibility, and tensile strength. It can be effectively formulated for adhesion to steel, aluminum, and various plastics. Products formulated with BR-744SD can be highly flexible, elastomeric, and tacky. It is excellent as an adhesion promoter or reactive tackifier, and is a perfect choice for optically clear UV-PSAs.

Bomar BR-3741AJ is an aliphatic 1.3 acrylate functional polyether urethane. The extremely elongative nature of BR-3741AJ makes it an excellent candidate for consideration in UV light-curable PSAs as a reactive tackifier. It is also used as a co-oligomer for adhesion promotion in coatings. Films formulated with BR-3741AJ are highly flexible, elastomeric, and tacky. This oligomer is an excellent adhesion promoter, and compared to other reactive tackifiers it results in relatively tougher films. It is a perfect choice for optically clear UV pressure-sensitive adhesives (PSAs).

Teckrez® CX-902 is a hydrocarbon resin based on selected C9 and DCPD feedstocks. It is used as an alkyd coating modifier to increase hardness, gloss, and chemical resistance. As a resin binder in printing inks, Teckrez® CX902 improves pigment wetting and solvent release. Teckrez® CX902 is used as a rubber processing aid, tackifier resin in mastic adhesives, and modifier in concrete curing and other coating applications.

Teckros® R100 is a light- colored, stabilized pentaerythritol ester of gum rosin used in a wide range of hot melt, pressure sensitive, other adhesives, and many other applications where rosin ester performance and pleasant odor are important. Unlike tall oil-derived rosin esters, Teckros® R100 is free from meaningful sulfur content resulting in low odor of a pleasant character.

BOMART BR-3641AJ is an aliphatic polyether urethane acrylate with a high molecular weight and theoretical 1.3 functionality. Films formulated with BR-3641AJ are highly flexible, elastomeric, and tacky. It is excellent as an adhesion promoter or reactive tackifier. It is a perfect choice for optically clear UV-PSAs.

FloraRez® 785 is a glycerol ester derived from highly hydrogenated gum rosin. This thermoplastic resin exhibits a very pale color and demonstrates remarkable resistance to oxidation and color degradation. It serves as a valuable tackifying resin component in diverse applications such as adhesives, inks, coatings, and personal care formulations, particularly in scenarios where oxidative stability is essential.

Teckrez® HM-1000 is a Styrenated Hydrogenated hydrocarbon resin used where water-white color, excellent heat stability, narrow molecular weight distribution and a degree of polarity are beneficial. HM-1000 enables formulation of premium EVA and mPE-based hot melt adhesives providing better specific adhesion when compared to standard hydrogenated hydrocarbon resins. Other applications include hot melt PSA's, premium aerosol adhesives, elastomeric sealants, wax compounding, medical adhesives, and others.

FloraRez® HR is gum rosin that has been subjected to a high degree of hydrogenation. This results in a nearly colorless thermoplastic resin that has excellent thermal and oxidative stability characteristics, which are a result of the hydrogenation process. Compared to unmodified gum, wood, and tall oil rosins, FloraRez® HR offers the highest degree of color and solubility stability for its derivative products.

Bomar BR-3641AA is an aliphatic polyether urethane acrylate with a high molecular weight and theoretical 1.3 functionality. Films formulated with BR- 3641AA are highly flexible, elastomeric, and tacky. When formulated as an adhesive, this oligomer is excellent as an adhesion promoter or reactive tackifier. This oligomer offers improved adhesion to a variety of substrates.

BR-3741AB is a 1.3 functional aliphatic polyether urethane acrylate. The extremely flexible nature of BR-3741AB makes it an excellent candidate for consideration in UV light-curable PSAs as a reactive tackifier. It is also used as a co-oligomer for adhesion promotion in coatings.

FloraRez® PR is gum rosin that has undergone partial hydrogenation. It is a pale-colored resin with excellent thermal and oxidative stability characteristics due to the hydrogenation process. Compared to unmodified gum, wood, and tall oil rosins, it offers a higher degree of color and solubility stability for the derivative products produced from it.

DOG Chemie Deotack 920 may be applied in various areas, including adhesives, coatings and polymer processing. It improves the tack as well as pigment wetting and has a high resistance against acids and bases. Furthermore, the product has a water-repellent effect (hydrophobizing). Typical areas of application for adhesives include hot melts, solvent adhesives, PSA or dispersion adhesives. In coatings, it is used for the preservation of structures, asphalt modification, pigment pastes, improving corrosion stability and printing colors.

Kolon Industries HIKOREZ® A-2115 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are tackifier for for solvent based pressure sensitive adhesive(SBPSA), hot melt based pressure sensitive adhesive (HMPSA) and hot melt adhesive(HMA). .

Polybut EM MM 10(A-75) is a water-based emulsion of medium molecular weight polyisobutene.

Polybut EM 600(A-50) is a water-based emulsion of low molecular weight polybutene.

Resinall® 622 is Rosin ester. Used as tackifier for coatings.

SYLVARES TR 7125 polyterpene resin is a thermally stable polyterpene tackifier that can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. It may also be used in investment casting applications.