Products in Packaging: Reinforcement

JetFil® 575C-HB is a white, high-purity, extremely platy, fine talc. It is recommended for excellent stiffness, HDT, and dimensional stability in high-performance plastics, plastic films, and wire and cable applications. It is in compacted form for maximum extruder throughput, minimum dust, and improved dispersion.

JetFil® V700C is an off-white, high-purity, extremely platy, ultrafine talc with excellent top-size control that is recommended for excellent stiffness, HDT and dimensional stability, impact strength, and esthetics in high-performance plastics. It is also ideal for the nucleation of semi-crystalline plastics, plastic films, and foamed plastics. It is compacted for maximum extruder throughput, minimum dust, and improved dispersion.

JetFil® T290 is an off-white, extremely platy talc. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastic applications, including wood-plastic composites. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® 700C is an off-white, high-purity, extremely platy, ultrafine talc with excellent top-size control that is recommended for excellent stiffness, HDT and dimensional stability, impact strength, and esthetics in high-performance plastics. It is also ideal for the nucleation of semi-crystalline plastics, plastic films, and foamed plastics. It is compacted for maximum extruder throughput, minimum dust, and improved dispersion.

JetFil® P500 is an off-white, high-purity, extremely platy, fine talc. It is recommended for improving stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheets and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® T390 is an off-white, extremely platy talc. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastic applications, including wood-plastic composites. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® T490 is an off-white, extremely platy talc. This product is used for enhancing stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheet and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® 700D is an off-white, high-purity, extremely platy, ultrafine talc with excellent top-size control that is recommended for excellent stiffness, HDT and dimensional stability, impact strength, and esthetics in high-performance plastics. It is also ideal for the nucleation of semi-crystalline plastics, plastic films, and foamed plastics. It is densified for reduced dust and ease of dispersion in low-shear extruders.

JetFil® P350 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P350 could also help in achieving good long-term thermal stability (heat aging).

JetFil® P150 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P150 could also help in achieving good long-term thermal stability (heat aging).

JetFil® T590 is an off-white, extremely platy, fine talc. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheets and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® 575P-575C is an off-white, high-purity, extremely platy, fine talc. It is recommended for excellent stiffness, HDT, and dimensional stability in high-performance plastics, plastic films, and wire and cable applications. It is available in compacted form (JetFil® 575C) for maximum extruder throughput, minimum dust, and improved dispersion.

JetFil® P200 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P200 could also help in achieving good long-term thermal stability (heat aging).

GrapheneBlack™ 3X is NanoXplore's slightly larger pristine few-layer-graphene designed for multi-functional performance improvements in a wide range of markets and technologies. GrapheneBlack can be used in thermoplastics, thermosets, concrete, coatings, lubricants, and rubbers and enables manufacturers to cost-effectively improve long term product performance.

PFI C Flakes are offered for use in applications ranging in many applications including corrosion resistant coatings, polymer reinforcements and specialty pigments. The PFI T Flakes have been shown to increase the chemical resistance of coatings, improve the dimensional stability of moldings, and reduce surface waviness while providing a unique substrate for pigment deposition. The PFI C Flakes have the ability to be engineered in a wide range of specifications offering new and unique applications.

Our Calcined Clay - Hyperlink 66 is calcined metakaolin produced by removing chemically bound water from the crystal structure. This Calcined clay is brighter than most water-washed clays, offering excellent processing and reinforcement in rubber application.

PFI C Flakes are offered for use in applications ranging in many applications including corrosion resistant coatings, polymer reinforcements and specialty pigments. The PFI T Flakes have been shown to increase the chemical resistance of coatings, improve the dimensional stability of moldings, and reduce surface waviness while providing a unique substrate for pigment deposition. The PFI C Flakes have the ability to be engineered in a wide range of specifications offering new and unique applications.

Our Calcined Clay - Hyper 200 R is calcined metakaolin produced by removing chemically bound water from the crystal structure. This Calcined clay is brighter than most water-washed clays, offering excellent processing and reinforcement in rubber application.

GrapheneBlack™ 0X is NanoXplore's slightly smaller pristine few-layer-graphene designed for multi-functional performance improvements in a wide range of markets and technologies. GrapheneBlack can be used in thermoplastics, thermosets, concrete, coatings, lubricants, and rubbers and enables manufacturers to cost-effectively improve long term product performance.

PFI C Flakes are offered for use in applications ranging in many applications including corrosion resistant coatings, polymer reinforcements and specialty pigments. The PFI T Flakes have been shown to increase the chemical resistance of coatings, improve the dimensional stability of moldings, and reduce surface waviness while providing a unique substrate for pigment deposition. The PFI C Flakes have the ability to be engineered in a wide range of specifications offering new and unique applications.

PFI C Flakes are offered for use in applications ranging in many applications including corrosion resistant coatings, polymer reinforcements and specialty pigments. The PFI T Flakes have been shown to increase the chemical resistance of coatings, improve the dimensional stability of moldings, and reduce surface waviness while providing a unique substrate for pigment deposition. The PFI C Flakes have the ability to be engineered in a wide range of specifications offering new and unique applications.

PFI C Flakes are offered for use in applications ranging in many applications including corrosion resistant coatings, polymer reinforcements and specialty pigments. The PFI T Flakes have been shown to increase the chemical resistance of coatings, improve the dimensional stability of moldings, and reduce surface waviness while providing a unique substrate for pigment deposition. The PFI C Flakes have the ability to be engineered in a wide range of specifications offering new and unique applications.

Dragonite™ -HP is a halloysite-­‐based aluminosilicate clay exhibiting a rare, naturally occurring hollow tubular structure. Through its unique morphology and ideally-­‐suited chemistry, it enhances the properties of wide range of thermoset resins to meet the requirements of demanding applications. Dragonite™-HP is an untreated product grade with high reactivity and acidity. It s recommended at loadings of 1 - 10 wt%.