Products in Printing & Packaging: Stabilizer

Maskom masterbatch & Compound Technologies M 85028 shows the refraction effect of sunlights within the polymer chain. It prolongs the useful life of plastic parts of film.

Hebei Jingu Plasticizer HY-B-20 is a kind of slight yellow viscous oily liquid, with viscosity of 325mpa.s, refractive index of 1.473 and density of 0.985. Epoxidized Soybean Oil is not soluble in water, but it is soluble in organic solvent, such as Hydrocarbon, ketone, lipids, higher alcohols, etc. and also slightly soluble in alcohol.

Nitto Kasei TVS 8832 is Most stabilizers are approved by the Food and Drug Administration (FDA) of the USA and registered at the Japan Hygienic PVC Association (JPHA), featuring high levels of safety-mainly used for food packaging materials or PVC pipes and joints.

Ferrostab® PE UV 66-20 Is MB UV stabilizer at 20% on PE for fibers, extrusion and molding, MASTERBATCH ANTI-UV.

BNX 1076 (2082-79-3)is a hindered phenolic antioxidant that provides excellent processing and long-term thermal stability in a wide variety of organic substrates such as plastics, synthetic fibers, elastomers, adhesives, waxes, oils, and fats.

Makrostab® UV 2012 are stabilizer masterbatches used for increasing the UV stability of polymer. Their application is recommended in all cases where the basic stabilization from the resin producer is insufficient for a given application. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilization of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.

Taiwan Colors & Chemicals LN-61 is suitable for soft pipe, transparent electrical wire films and sheet.

North Wanxing Chemical Co., Ltd. 2,2,6,6-Tetramethyl-4- Piperidone (TAA) is a very important intermediate in the process of synthesizing HALS and a pharmacy intermediate.

Polyfill Technologies UV Masterbatch PT-UV20 is an LL based masterbatch giving very good protection to PP & LLDPE. PT-UV20 is especially recommended for the applications with thin products such as films and tapes. The active ingredient consists of a combination of different HALS (Hindered Amine Light Stabilizer) additives, which gives the most effective light stabilization effect already at low dosages.

Baoding Lucky Chemical Light Stabilizer UV-646 is used in PE/PP film and tape, injection rotational molding, POM, PA, PET, ASA, PBT, ABS, HIPS, PMMA and PUR.

Makrostab® Thermo 2069 are masterbatches containing antioxidants intended to improve the processing, long-term heat or other, special, thermooxidative stability of the polymer. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilization of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.

North Wanxing Chemical Co., Ltd. N,N-bis-(2,2,6,6-tetramethyl-4-piperidinyl)-hexamethylene diamine(HMBTAD) is mainly used in hindered amine class light stabilizer of the key intermediate.

It is recommended for various applications which require high light stabilization of polymers.

KD Chem LX-824 Provide excellent heat stability, lubrication, and weatherability. One-pack type stabilizers for flexible and semi-rigid applications with fast gelling speed. Improved heat stability when used with epoxidized soybean oil. LX-824 is economical.

HITEMA® 23462 UV is a masterbatch that contains a synergic blend of oligomeric HALS along with benzophenone stabilized in a polyethylene carrier..

Makrostab® UV-TH 2419 are stabilizer masterbatches used for increasing the UV stability of polymer. Their application is recommended in all cases where the basic stabilization from the resin producer is insufficient for a given application. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilization of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.

STABIOL CZ 1111 is good early-color thermostable and long term stable, good transparent product. By combination with ESBO and co-stabilizers like TNPP, the mode of action of STABIOL CZ 1111 is synergistically intensified.

LS 622 is a hindered amine light stabilizer. It is used in light aging inhibition of polyethylene, polypropylene, polyurethane, metaformaldehyde, polyamine and polyester, also in ABS and engineering plastics.

Everstab LS-119 is particularly effective in polypropylene, polyethylene, -olefin copolymers and blends with EPR, ERR, PE, EVA, EAA, EVOH and filled PP.

Light stabilizer 791 is a synergistic mixture of Light stabilizer 944 and Light stabilizer 770. It is an excellent UV stabilizer especially for PP thick sections, which offers excellent surface protection. It also shows high stabilization efficiency in PP tapes. Light stabilizer 791 areas of application are PP, PP/EPDM and PP/PE/EPDM blend (TPO’s). Light stabilizer 791 is an excellent UV stabilizer for thick sections.The synergism between the high and low molecular weight HALS components of Light stabilizer 791guarantees maximum protection for the polymer against degradation from UV radiation and long‐term heat exposure.

Chiguard® 380W HXA UV2900 is a highly efficient and non-staining UV absorber, covering both of UV-B and UV-C regions up to 400 nm. It is based on benzoxaxinone structure which delivers a shortterm heat stability up to 350 °C and a long term heat stability up to 160 °C. By a proprietary process, Chiguard® 380W is made to dissolve quickly in PET resin and to give a transparent appearance even with high dosage (as demonstrated in the Comparative Data Section below).

S V Plastochem STS - 1 Rig (Butyl Tin Mercaptide) is used in rigid pipes, hoses, tubings, injection moldings & garden pipes.

Baoding Lucky Chemical Light Stabilizer Lksorb C8481 is nainly used in the field of PE PP film and tape.

GCH Technology 5770 as a stabilizer, is superior to classic products such as UVAs and nickel-containing stabilizers. 5770 is very suitable, alone or in combination with oligomeric HALS, for the UV stabilization of tapes and thick items such as car bumpers and garden furniture. 5770 is recommended for polymers such as polyolefins, PS, HIPS, ABS, SAN. It is also effective in polyurethanes, polyamides and polyacetals.

KINOX 98 is a nylon, PU & engineering plastics like polyacetal, white to off-white crystalline powder/ granules.

S V Plastochem STS - 102 (Di Butyl Tin Maleate) is used in PVC/ ABS. It has excellent light stability & odorless application.

S V Plastochem STS - MTM 2 (Methyl Tin Mercaptide) is used in soft films, hoses, tubings & injection moldings.

Makrostab® UV 2002-MD are stabilizer masterbatches used for increasing the UV stability of polymer. Their application is recommended in all cases where the basic stabilization from the resin producer is insufficient for a given application. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilization of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.

Himpton HBC 1063A is an industrial grade liquid heat stabilizer, is mainly used in the production of soft, semi-soft PVC products processing, especially suitable for highly filled non-transparent and translucent calendered products, such as advertising film, color film, artificial leather and so on.

Maskom masterbatch & Compound Technologies M 85029 shows the refraction effect of sunlights within the polymer chain. It prolongs the useful life of plastic parts of film.

MCA Technologies MCA- Light Stabilizer 765 is a (HALS) Hindered Amine Light Stabilizer.

The Hanson Group UV-622 is a low-dust, polymeric hindered amine light stabilizer who provides outstanding light stability to many polymers and, in addition, gives long-term heat stability to polymers by radical trapping mechanism similar to that of hinder phenol. UV-622 produces virtually no effect on initial substrate color.

Makrostab® UV 2002 are stabilizer masterbatches used for increasing the UV stability of polymer. Their application is recommended in all cases where the basic stabilization from the resin producer is insufficient for a given application. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilization of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.