Products in Printing & Packaging: Polyethylene Terephthalate (PET)

PEPLPET B 103C PET is a Pet Bottle Grade.

Sarafil FD100 - 12 Microns is specially designed for thermoformable and lamination applications. The film can be thermoformed with APET, CPET sheets and finds applications in fresh and frozen trays, packs and lids etc and similar other uses.

DURAMET® PCR PET is an ultra-high barrier metallized polyester film with a moisture protected metal layer were 90 percent content is from chemically recycled polyester and offers offering exceptional water and oxygen barrier performance.

Far Eastern New Century Corporation BT825 is PET sheet for a variety of applications, including Anti Static, Electronics Tray to live up to the demands worldwide. Far Eastern New Century Corporation is No. 1 APET roll/cutting sheet supplier in Asia and mainly has the pacific area as its customer base.

PEPLPET F097HA is a film grade Resin.

Skyrol® SH22 (48ga) Polyester is an optically clear film with an adhesion promoting chemical treatment on both sides. It provides an enhanced adhesion to various inks and adhesives. SH22 film is available in a range of thickness 48ga to 142ga, and is used for label, solar control, printing and high grade packaging applications. SH22 film is FDA approved for direct food contact in compliance with FDA 21 CFR 177.1630 (f,g,h).

Evergreen Plastics RPET Green Pellet is a recycled polyethylene terephthalate (rPET) resin in pellet formats. Pellet is available with a Non-Objection Letter (NOL). All rPET is produced to the customer’s specifications.

PEPLPET B 07C PET is a Pet Bottle Grade.

Laser+® RF (AF626) is produced at DAK Americas manufacturing site in Zarate, it is PTA/IPA based, and is sold to customers in Argentina, Bolivia, Brazil, Chile, Colombia, Mexico, Paraguay, Peru, Uruguay and Venezuela. DAK Americas Laser+® RF AF626 will be used primarily for thick wall applications such as refill bottles for water and carbonated soft drinks.

JP Recycling PET flakes is the only one that approaches the status of household name. That’s likely because PVC has, for decades, seen extensive use in commercial and residential properties. It’s a popular option for windows, sidings, and pipes. It’s weatherproof, so it can take the place of traditional construction materials where there’s a desire for both weatherproofing and esthetics. PVC remains popular for now, but the jury is out on its future. The toxic nature of PVC is playing a key role in discussions about its future use, as is the difficulty of recycling PVC plastic.

LIGHTER™ C93 PET COPOLYMER resins are polyethylene terephthalate produced from PTA and MEG. These polymers are specifically designed for the production of beverage, food and other liquid containers and for thermoforming. LIGHTER C93 is suitable for the production of both mineral water and carbonated soft drinks bottles. LIGHTER C93 is recommended also for the production of extruded thermoformable sheets.

Poly Recycling AG Pet granules is used for the production of bottles, fibers, films and strapping as well as for engineering compounds. Fiber applications are, for example, Fleece Jackets, sleeping bags and pillow fillings or sports shoes.

Skyrol® AH68L Polyester is off-annealed product of SH68L to enhance the heat stability and is optucally clear, glossy, both side adhesion promoting pretreated polyester film. AH68L is available in the thickness from 175 micron.

PEPLPET F097H is a film grade Resin.

Skyrol® SR53 (500ga) Polyester is an untreated, rough-surface, milky white and hazy polyester film. SR53 has excellent mechanical and dielectric strength, durability, dimensional stability, low water absorption, and good resistance to most chemicals. SR53 retains these properties over a wide range of temperature and humidity. SR53 film is UL Flammability Rated at VTM-2.

MultiPet C-02 from one way bottles, post consumer.

PET Clear Sheet is a clear sheet PET from post-consumer trays and skeletal waste. PLASgran Recycled Regrinds are high quality regrind polymers produced from controlled blends of recycled materials, to defined specifications.

Skyrol® SR50 (92ga) Polyester is an untreated, rough-surface, and high haze polyester film with excellent dielectric strength. SR50 is available in a wide range of thickness from 92ga to 1000ga and is extensively used for cable wrapping, electrical motor insulation and other general purpose applications. SR50 film is FDA approved for direct food contact in compliance with FDA 21 CFR 177.1630 (f,g.h).

Skyrol® AH82L Polyester is off-annealed product of SH82L to enhance the heat stability and is optucally very clear, glossy, both side adhesion promoting pretreated polyester film. AH82L is available in the thickness from 23 to 188 micron.

Plastiverd Plastiverd Flow is a copolymer of PET (Polyethylene-Terephthalate), delivered in resin pellets. It is suitable for the stretch blow molding process in one or two stages as well as for film and sheeting applications through extrusion.

Arboblend® V3 combines a great number of material types and a wide range of property profiles. The materials on offer are up to 100% bio-based. Depending on the formula, ARBOBLEND® materials contain biopolymers such as polyhydroxyalkanoates (PHA), polycaprolactone (PCL), polyester (e.g. bio-PET), starch, polylactic acid (PLA), bio-polyolefins (bio-PE), bio-polyamides (bio-PA), lignin, natural resins, natural waxes, natural oils, natural fatty acids, cellulose, organic additives and natural reinforcing fibers. ARBOBLEND® materials are designed to be biodegradable or resistant depending on the intended application. Biodegradability is a property that offers an additional benefit in applications such as urns, plant aids, mulch films and many other uses.

The film Krupet-A Flakes blue hot washed is made of Polyethylene Terephthalate and is appropriate for high-end applications. It's made up of recycled polymer.

Steinbeis PolyVert RPET REGRANULATE CLEAR is a produce recyclates of the highest quality. With innovative and sustainable production processes.

Laser+® RF 9921 (F65R) is a unique copolymer particularly suited for use in the returnable carbonated soft-drink PET container applications where transparency for thick walled bottle parts and high chemical resistance are needed. It is a medium intrinsic viscosity (IV) product that gives the end user a clear bottle and offers superior processing and consistency.

PET Jazz Regrind is a Jazz, wash flake PET from post-consumer beverage bottles. PLASgran Recycled Regrinds are high quality regrind polymers produced from controlled blends of recycled materials, to defined specifications.

Plastiverd Plastiverd HF is copolymer of PET (Polyethylene-Terephthalate), delivered in resin pellets. This resin is particularly suitable for use in the manufacture of hot fill/heat set containers.