Products in Industrial Coatings: Composites

VINNAPAS® UW 1 FS is a tasteless, solid, thermoplastic homopolymer. It is a clear and colorless resin obtained through the polymerization of vinyl acetate. This versatile product finds application in various fields, including fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

VINNAPAS® UW 10 FS is a solid, thermoplastic homopolymer. This clear and colorless resin is produced through the polymerization of vinyl acetate. It is tasteless. Typical applications for VINNAPAS® UW 10 FS include fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

VINNAPAS® UW 25 FS is a solid, thermoplastic homopolymer. This clear and colorless resin is produced through the polymerization of vinyl acetate. It is tasteless and finds application in building and construction adhesives, as well as resin modification for composites. The product is available in the form of solid, colorless beads that are odorless and tasteless.

VINNAPAS® UW 4 FS is a solid, thermoplastic homopolymer. The resin is clear, colorless, and tasteless, and it is produced by polymerizing vinyl acetate. Typical applications for VINNAPAS® UW 4 FS include fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

VINNAPAS® B 60 FG is a solid, thermoplastic homopolymer. The clear and colorless resin is prepared by the polymerization of vinyl acetate. VINNAPAS® B 60 FG is tasteless. Applications include building and construction adhesives, composites and molding, do-it-yourself, industrial adhesives, industrial coatings, and resin modification.

VINNAPAS® UW 2 FS is a solid, thermoplastic homopolymer. The resin is clear, colorless, and tasteless, and it is produced by polymerizing vinyl acetate. This versatile product finds typical applications in fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

AFCONA 2723 is a defoamer and air-releaser for unsaturated polyester, polyurethane, UV, and epoxy resin systems. It is recommended for thin-layer (gel coat), casting resins, and epoxy resin systems (e.g. floorings), as well as for room temperature curing of unsaturated polyesters used in glass fiber-reinforced systems.

AGC Chemicals Americas, Inc. LUMIFLON® LF-600X consists of alternating fluoroethylene and alkyl vinyl ether segments (FEVE). The fluorinated segments provide outstanding UV stability, weather resistance, and chemical resistance, while the vinyl ether segments provide solvent compatibility and crosslinking sites. LUMIFLON resins are used to make ultra-weatherable coatings for architectural, aerospace, automotive, and industrial maintenance markets. LUMIFLON LF-600X is a moderate OH number resin. It is typically used to formulate coil coatings where flexibility and excellent weatherability are required. The major market where LF-600X finds application is the architectural market. However, LF-600X is also being used in ambient cure applications where high coating flexibility is required, for example, in coatings for plastics.

Keyland Polymer UV/EB resin UVP-1300 is an unsaturated polyester methacrylate resin that is cured with UV/EB energy. It is used in powder coatings, as an additive in ink, toner, and overlay varnish applications, and as an additive in 3D additive manufacturing applications.

NANOMYTE® TC-4001-UVP is a single component formulation designed to protect metals and other surfaces from degrading, preserving their structural integrity and appearance. The hard, dense, and smooth coating is a nanostructured composite consisting of organic and inorganic phases. It resists scratching and chipping and adheres strongly to bare, pretreated, or painted metal surfaces, thus providing a durable barrier to liquids and gasses. A variety of other surfaces may be coated as well, such as plastics and composites. The coating is easily applied by immersion, spraying or brushing, in thicknesses ranging from microns to mils, and is available in glossy or matte finishes.

NANOMYTE® SR-500EC-UVP is a transparent coating designed to provide easy-to-clean surfaces with excellent weatherability and UV protection for underlying substrates. The product, a hard, dense and smooth coating, is a nanostructured composite consisting of organic and inorganic phases. The coating resists scratching and chipping, strongly adheres to metal, glass and ceramic surfaces, and has superior water repellency and soil resistance. SR-500EC-UVP is a single component product that is easily applied by dip, spray or brush techniques and cured at room temperature.

Sunspacers™ 04.X are finely divided, optically clear, solid fused amorphous silica micronized powders. This product is specially engineered for paints, liquid and powder coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These micronized powders increase corrosion resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including abrasion, mar and scratch resistance. Sunspacers™ 04.X have a median particle size of approximately 3-4 microns, with a particle size range of 0.5 microns to 13 microns.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

Keyland Polymer UV/EB Resins UVE-5100 is an unsaturated epoxy acrylate resin for use in powder coatings, as an additive in ink, toner, and overlay varnish applications, and as an additive in 3D additive manufacturing applications.

Arostruct® is a fast set, rapid curing, 100% solids, semi-structural, two-component performance modified polyurea spray coating/lining material. Its fast gel time makes it suitable for applications down to -20°F without special conditioning of the component resins and isocyanates. AroStruct produces an extremely tough rigid film at all thicknesses.

VF 280™ is a fast set, rapid curing, pure elastomeric polyurea protective coating for industrial applications requiring a flexible coating or lining for waterproofing or secondary containment. This protective membrane can be applied to geotextile fabric, concrete and steel substrates. VF 280 is a volatile free, odorless system proportioned at a 1:1 mix ratio with plural component spray equipment. VF 280 may be applied at varying thicknesses in a single application using a multi-pass spray technique.

VF 380™ is a 100% solids, fast setting, plural component, ultra-low shrink, polyurea elastomer and high performance coating. VF-380 is primarily designed for foam, geotextile and other non-reinforced substrates due to its specially designed low shrink formulation, but has excellent bond to steel, concrete, masonry and other properly prepared substrates. VF-380 is an excellent coatings solution for industrial applications requiring a resilient liner for waterproofing or secondary containment.

FSS 50DM+™ is a 100% solids, fast setting, plu-ral component, polyurea elastomer and high perfor-mance coating. FSS 50DM+ is primarily designed for properly prepared steel and metal substrates, however, due to it’s higher modulus, and faster gel times, FSS 50DM+ has excellent bond to concrete, masonry and other properly prepared substrates. FSS 50DM+ can be applied horizontally, vertically, and overhead, making it ideal for industrial applications with a variety of sub-strates, and complex geometries.

VF 380-F™ is a 100% solids elastomeric polyurea developed for applications such as geotextile lining membranes. VF380-F may also be applied to concrete and steel substrates. VF380-F is a volatile free, odorless system applied with 1:1 mix ratio with plural component spray equipment. VersaFlex VF380-F provides less shrinkage with improved elongation characteristics. As a result, VF380-F makes an excellent polyurea for liners, geotextile coatings, and applications where resilience and durability are required. VF380-F may be applied at varying thicknesses in a single application using a multi-pass spray technique.

VF 330™ is a 100% solid, fast setting, plural component, polyurea elastomer and high performance coating. VF 330 is specially formulated for high abrasion resistance and offers the best combination of elastomeric waterproofing, corrosion protection, and abrasion resistance. VF 330 can be applied horizontally, vertically, and overhead, making it ideal for industrial applications with a variety of substrates, and complex geometries.

IMI Fabi HTP1 is used as Top coats - General industry Wood Varnish.

VF 502™ is a fast set, rapid curing, 100% solids, flexible, two-component polyurethane/polyurea elastomer spray coating material. VF 502 was developed for use in high-pressure spray equipment and is used by itself or in combination with other materials to produce a protective coating on metal, concrete, aluminum, and composite substrates. VF 502 creates an extremely tough film at all thicknesses and can produce films from 10 mils to 250 mils without visible sag or runs in single or multiple pass applications. This material is relatively moisture and temperature insensitive, allowing use in the most problematic ambient conditions.

Defoamer and air-releaser for unsaturated polyester, Polyurethane, UV and epoxy resin systems

ASTC 1006 Polyurea Spray is a two component, high wet-out, long open time, aromatic MDI or TDI prepolymer and multifunctional polyurea amine blend. The polymer system is "pure polyurea" and is not modified using urethane or other additives.

Epox-Zen™ HSP is an 2K epoxy primer high solids. The formulations offering the finest in corrosion protection, chemical resistance, adhesion and topcoat hold-out. Providing durable protection over ferrous and non-ferrous metals, certain FPRs and composites, Epox-Zen™ Epoxy Primers are a substantial upgrade from conventional alkyd primers.

Odourless End Dip™ LSR2112 is a fast setting silicone rubber that will cure at room temperature. This 1-Part silicone has excellent unprimed adhesion to many composites, metals and glass.

FSS 45DC™ F Plus is a 100% solid, fast setting, plural component, polyurea elastomer and high perfor-mance coating. FSS 45DC-F Plus is primarily designed for properly prepared concrete and masonry, but will bond tenaciously to steel and other properly prepared substrates. It is designed as a faster, more robust ver-sion of the classic FSS 45DC. FSS 45DC-F Plus is an eco-nomical coatings solution for industrial applications re-quiring a resilient liner for waterproofing and/or abra-sion resistance. FSS 45DC-F Plus can be applied horizon-tally, vertically, and overhead, making it ideal for indus-trial applications with a variety of substrates, and com-plex geometries.

Chemlease® MPP 2684W has been formulated to seal molds and tooling in the composites sector, both FRP and advanced composites. It is suitable as a mold sealer and adhesion promoter for plastic and metal molds, including substrates made of polyester and vinyl ester (gelcoat and non-gelcoat processes), epoxy or phenolic resin, BMI, PU and most metals. Chemlease® MPP 2684W is an excellent sealer but cannot be used as a release agent. Using Chemlease® MPP 2684W without a suitable mold release agent may damage the mold.