Products in Paints & Coatings: Silicates

AnTec BH-50 is a high-performance aluminum silicate product, dedicated to flat exterior wall coatings. It is a white powder with a special flake structure and uniform particle size distribution.

MICROVER DP4 is used as mineral filler in paints, adhesives, rubbers, sealants and fillings with natural high purity of sedimentary origin.

HALTEX® 302 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

VERDOL D-500 is used as mineral filler in paints, adhesives, rubbers, sealants and fillings with natural high purity of sedimentary origin.

Southeastern Performance Minerals OPTIbrite is a wet processed muscovite mica with a platy shape, high aspect ratio, chemical inertness, and superior color.

Ulmer Weiss XM is a fine calcium carbonate powder with a yellow index of 7.6 that is designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paper, paperboard, paints, varnishes, coatings, printing inks, mastics, soaps, detergents, rubber, and polishing mixtures. Ulmer Weiss XM is a solid powder in appearance with a characteristic odor.

Ukrsilicate LITIUM 1070 is a representative of the concept of chemical surface hardening. It is an aqueous solution of lithium silicate. Lithium is a clear liquid with shades of yellow, blue, or blue-gray.

The Hindustan Mineral Products China Clay PG RF & MF 240# is naturally occurring “Hydrated Aluminum Silicate” having the usual compositions Al2O3 2SiO2.2H2O. The grading of the material is primarily done on the basis of the whiteness. The important properties of China Clay are that it has good plasticity , does not swell in water, withstand high temperature (upto 1300°C and even above ) and is a non-conductor of electricity.

NNovinox®ACE36W is an eco-friendly Zinc Phosphosilicate. It is a stable and non-hygroscopic white powder with a low tinting strength, it is easily dispersed. Novinox®ACE 36W is designed for the formulation of eco-friendly paints and coatings. Without any safety labeling, it offers a high level of protection against corrosion. Novinox®ACE 36W is suitable for a wide range of resins, water or solvent based systems. It is particularly suitable for waterborne systems.

POSIL 25 is potassium silicate. It is used as covering material of welding rod binder and tv cathode-ray tube fluorescent material.

For MAL Magyar Aluminum VISCOSITY OPTIMIZED HYDRATES ALOLT 710 are Ground and finely precipitated hydrates are mainly used as environmentally friendly flame retardant filler materials in the production of: cable insulation; thermoplastics; cross-linked elastomers; polyurethanes; PVC; water-based dispersions; polyester resins; papers; epoxy resins; paints. All these grades are white (whiteness > 90 %).

Kaolin G30M is ultra-pure product with controlled bulk density and controlled pH. Suitable for Personal Care applications.

Kaolin GF-40M is ultra-pure product with controlled bulk density and controlled pH.

DISPERCEL NC 6029/Op (Alluminosilicate)is applied in flexographic and rotogravure inks for paper, aluminum and different types of plastic films. Wood lacquers and coatings, cosmetic application (i.e. nail lacquers, etc.)

PURMOL® Powder and Paste from Zeochem AG are molecular sieve powders and pastes which give the answer to moisture scavenging problems for a variety of applications. Powder types 3A and 4A are available in standard version or synthesized and treated for special applications. Some grades can even be used in the cosmetic field (face masks) or as additive in ointments and creams for warming up.

CoatMasters® 4007 Densifier-Hardener System is an advanced Nano-type penetrating formulation, used as a densifier and hardener applied on cementitious surfaces. Providing a natural look sheen finish with medium reflectivity, it can be tinted with proprietary colorants for custom finishes; designed for use as a Nano-based coating for concrete and for any type of cementitious surfaces. This water-based system is made up of advanced polymeric thermosetting blends, including lithium-based silicates as the active ingredient. CoatMasters 4007 Densifier-Hardener System is suitable for use on various grades of alkaline mineral substrates. The product is used for treating porous and non-porous surfaces, and can be applied on various concrete surfaces, including natural stone. It also exhibits adhesion to other substrate materials used in combination such as metal, wood, and plastic. CoatMasters 4007 Densifier-Hardener System provides long lasting protection against common stain pollutants, greatly reduces efflorescence build-up, high-abrasion resistance, dustproof, non-yellowing, and provides anti-graffiti protection for cleaning, burnishing, and/or polishing. It has a quick dry time with excellent “hydrolytic” stability for moisture resistance, surface is breathable and has excellent recoating properties, as desired, to maintain sheen properties.

Ukrsilicate Potassium-sodium silicate is one of silicic acid salts with chemical formula K2SiO3. Potassium-sodium silicate is a glass industry product obtained by thermal effect on mixture of potassium carbonate, sodium carbonate, and quartz sand.

VERDOL D-30/150 is used as mineral filler in paints, adhesives, rubbers, sealants and fillings with natural high purity of sedimentary origin.

Southeastern Performance Minerals SMica50 is a wet ground muscovite mica, processed specifically for industrial applications. Proprietary milling induces a high degree of delamination, which translates into a high aspect ratio and increased resiliency.

Ultramarine RS 21 is a medium tinting strength, mid shade Ultramarine blue. It is heat fast, lightfast, easy to disperse and approved worldwide for use in sensitive applications such as food contact plastics and cosmetics.Ultramarine RS 21 is widely used alone to obtain a bright, transparent shade of blue, or in combination with other pigments such as titanium dioxide, with which it gives an attractive pastel shade.Ultramarine RS 21 is intended as a general purpose pigment with applications inpaint, ink, soap, cosmetics and many other industries. Ultramarine RS 21 can be used in plastics.

Vitro Minerals LA-600(1) are functional fillers and extenders produced from clean, post-industrial, glass feedstocks. X-ray diffraction and scanning electron microscopy confirms that the LA Glass calcium aluminosilicate powders are fully amorphous and contain no crystalline silica. The glass chemistry results in relative chemical inertness, making LA Glass resistant to blooming, blistering, or chemical degradation in harsh environments. LA Glass powders enhance a wide range of paints, coatings, plastics, and adhesives. High consistent brightness, tint retention and stain/scrub resistance can be achieved in most paint and coating systems. LA Glass powders have low oil absorption and can be easily dispersed in water- or solvent-based systems. The feedstocks are certified post-industrial and are free from contaminants associated with post-consumer curbside glass.

Datong Jinyu GB-CK88B is an anhydrous aluminum silicate produced by a controlled,high-temperature heating of a water-fractionated kaolin.GB-CK88B is specifically designed for use as a filler in automobile electrophoresis prime coat.As a calcined kaolin pigment,with the property of high brightness,excellent light scattering,fine particle,is an extender that can replace titanium dioxide partly to improve the efficiency and reduce production costs,and can help paint to form easily the close-grained and smooth paint film. It is stable and hard to sedimentate in electrophoresis tank.With low impurity and good inertia, it can improve paint film's stability against corrosion and moisture-proof property. The particle has micro platy shape.The series has advantages of low oil absorbency and easy dispersion.

WhiteLite™ WL42 lightweight mineral powders are amorphous products obtained by the fusion of several inorganic substances mainly silica, alumina, boria, and sodium oxide, with minor amounts of calcia.

SODASIL® P95 is a Amorphous aluminum and sodium silicate obtained by precipitation in an aqueous medium.

SpaceRite S-11 is a fine crystalline, aluminum trihydroxide with uniform particles averaging 1/4 micron in diameter. It is an organic-free pure white powder produced by a proprietary precipitation process that closely controls particlesize distributions. SpaceRite S-11 can also replace other extenders providing enhanced performance and benefits in coatings and adhesives.

KS No. 1 is sodium silicate. It is also the basic source material of silica derivative like silica gel, silica sol, zeolite, white Carbon.

PIQ-White Filler 300 is a fine sized dry pulverized carbonate filler. Material is available in 50 lb. paper bags, palletized and stretch wrapped, 2000 lb. mini bulk bags or in bulk. Piqua Minerals fillers are available with various average particle sizing for other filler applications.

GRANUTEC® vermiculite Vermiculite is a naturally occurring mineral filler, consisting primarily of magnesium silicate and aluminum, whose appearance resembles that of mica. This ore has golden lamellar particles, arranged in inter-lamellar spaces occupied by water molecules. When vermiculite is subjected to thermal shock, vermiculite has the unusual property of being expanded or expanded, due to the generation of steam from inter-lamellar spaces. This phenomenon leads to the formation of particles of beige color, very light, of shape comparable to that of an accordion.

Microblanc 2 is a very fine, extremely white and of high purity, crystalline Calcium Carbonate. The greatest advantage of Microblanc 2 is the re-enforcement of the hiding power of paints, this is due to its unique particle size distribution.

Corrostain™ 228 - Corrosion Inhibitive Pigment features a unique pigment chemistry which combines the dual functionality of Corrosion Inhibition and Tannin Stain Inhibition. This dual functionality aids in the reduction of raw material inventories and also provides effective inhibitor formulations. It is designed to provide good stability and performance in both solvent and water based systems. Typical use level is between 2 – 6% based upon total formula weight.

Vermicular products are produced from specially selected vermiculite, which is colored to give a wide range of decorative effects. Vermicular products have been developed for paints and coatings, thermoset resins, and cement products. They find use in decorative packaging, ceiling treatments, and cementuous commercial wall coverings.

Ultramarine RS 02 is a medium tinting strength Ultramarine blue with a very green undertone. It is heat fast, lightfast, easy to disperse and approved worldwide for use in sensitive applications such as food contact plastics and cosmetics.Ultramarine RS 02 is widely used alone to obtain a bright, transparent shade of blue, or in combination with other pigments such as titanium dioxide, with which it gives an attractive pastel shade.Ultramarine RS 02 is intended as a general purpose pigment with applications in paint, ink, soap, cosmetics and many other industries. Ultramarine RS 02 can be used in plastics.

ExBar® W 400 is manufactured using only the highest quality white, natural barium sulfate ore. Strict quality control results in consistent products that are used in coatings, paint, plastics, rubber, sealants, friction materials and many other applications where color, purity and particle size are principle concerns.

The WhiteLite™ WL-32 Lightweight Mineral Powders are amorphous products obtained by the fusion of several inorganic substances mainly silica, alumina, boria, and sodium oxide, with minor amounts of calcia.

AnTec C-96 is a kind of ultra-fine aluminum silicate with high brightness and fine particle size. This product has the characteristics of good covering performance, strong coloring ability, low sieve residue, low viscosity, and easy dispersion.

Ukrsilicate LITIUM 1100 is a representative of the concept of chemical surface hardening. It is an aqueous solution of lithium silicate. Lithium is a clear liquid with shades of yellow, blue, or blue-gray.