Products in Paints & Coatings: Polyolefins

Hanwha Solutions LDPE 963 is manufactured by autoclave process and designed for variety of extrusion coating application such as paper and Tarpaulin coating etc. LDPE 963 is well known for its excellent processability and high quality assurance. This product complies with U.S. FDA regulation 21 CFR 177.1520 (c) 2.1.

LUBA-print® 942 is a wax dispersion / wachsdispersion product. This product is based on waterbased paints and stains to improve slip, antiblocking and water resistance. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

Michem® Lube 190 - A wax emulsion provides mar, rub, block, and scratch resistance, and improved water resistance in coatings and graphic arts formulations.

Ultrapoly™ 211 A is a PTFE modified version of Ultrapoly 210 A. Ultrapoly 211 A is a high performance blend of tough, low COF polyethylene/PTFE dispersed in a hard drying binder. Ultrapoly 211 A is recommended where a high degree of slip, heat resistance, and abrasion resistance are required. Ultrapoly 211 A is 100% non-volatile and fast-setting. It protects the film in the earliest stages of the printing process while developing exceptional toughness over time. Ultrapoly 211 A is coatable and may be used for laser work. For optimum heat resistance, we recommend using 3 parts Ultrapoly 211 A to 1 part Fluoron™ 735 A (a 50% PTFE concentrate). Recommended usage level is 3 to 5%.

LUBA-print® 154/S is a wax dispersion / wachsdispersion product.This producthave uses in aqueous paint-systems. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

Marcus Oil and Chemical M200 is a low molecular weight polyethylene wax which comes in in liquid, pastille, flake and powder form for convenience of use.

ProHere® L 90005 imparts lubricity, scratch and abrasion resistance to metal coatings without affecting gloss.

CERETAN® MF 5010 is a spherical, micronized polyolefin wax modified with PTFE.Properties are good rub resistance, very good slip, good heat resistance, good solvent resistance, higher PTFE-content than CERETAN MF 5710. Applications in Paints and coatings e.g. can - and coil-, wood-, industrial- and powder coatings.CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

LUBA-print® 501/XB is a wax dispersion / wachsdispersion product.Industrial lacquer applications. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

LUBA-print® 301/K-2 is a wax dispersion / wachsdispersion product. Solvent based paint systems, to improve mar resistance. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

FRGEL®E900 is a polyethylene wax based specialty additive, FRGEL®E900 is generally recommended for variety of coatings and inks application.

TABOREN® PC 62 T 50 is a PP copolymer, Filler: Mineral filler, Stabilization: Basic antioxidant.

Microcarb® designed to be used in the production of water based coatings and paints allow for matt to gloss finishes, offering a good balance between coverage, whiteness and stability (Low Binder Demand). In addition, ultrafine qualities allow for the reduced consumption of titanium dioxide and other expensive extenders like PCC and Aluminum silicate.

SUPERCHLON® E-480T is developed special technology are the waterborne chlorinated polyolefin, which shows excellent adhesion to polypropylene substrates and can be used as primers and adhesives.

TABOREN® PH 22 B 25 is a PP homopolymer, Filler: Barium Sulfate, Stabilization: Basic antioxidant.

Ultrafine™ 1000 A is a finely micronized polyethylene wax powder recommended when maximum rub and mar resistance, block resistance, slip, re-coatability and elevated processing temperatures are required. The average particle size of Ultrafine 1000 A is 7 microns with a narrow distribution of particle sizes for ease of dispersion and uniformity during processing. Addition levels range from 0.5 to 3%, depending upon application requirements.

CERALENE® 1X is a low density polyethylene wax with a typical average molecular weight of 1200 MW.

TABOREN® PC 72 G 10 is a PP copolymer, Filler: Glass fibers, Stabilization: Basic antioxidant.

Kemfluid 201 is a polyethylene wax, used in extrusion of rigid or soft PVC. External lubricant with low amount of filler. Gives good surface shine.

Kolon Industries HIKOTACK® P-150 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are vehicles for ing ink. This grade especially shows superior compatibility with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease set time and to increase gloss. This grade also can be used as binder for color asphlat and tackifier for EVA based hot melt adhesive(HMA). .

Micronized polypropylene wax

LUBA-print® B 15/XB is wax dispersion / wachsdispersion product.Wood lacquer applications. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

Michem® Emulsion 91240G provides excellent anti-blocking, scratch and mar resistance as well as gloss in inks, coatings and overprint varnishes .

Marcus Oil and Chemical M500 is a low molecular weight polyethylene wax which comes in in liquid, pastille, flake and powder form for convenience of use.

Alkathene XLC177 is an extrusion coating grade exhibiting very good drawdown. The higher density and low MFI of this grade provide low moisture vapor transmission rates and excellent hot tack.

CalciRC 100 acts as a filler. It is a dry powder with high brightness and controlled top-cut. Has high purity, unique particle shape and narrow particle size distribution. Offers high whiteness, low iron content, low levels of heavy metals, low abrasivity, less agglomeration and better flow as well as rheological properties. Also offers lower density, no dust or waste from ultra-fine particles, optimum optical properties and relatively low surface area. It helps to achieve 6-sigma process control. Used in paints and printing inks applications.

DONGRAY® OPE WAX 600A is widely used in pipes, inks, coatings, cable fillings, hot metal products and textile processing industries.

PEW-2011 is water-based wax dispersion with high solid content, especially suitable for high solid content formula, easy to use and stable for storage. With excellent abrasion&scratch resistance, stain resistance, and smooth hand-feeling in water-based inks and coatings. In leather finishing agent, it can provide very good stain resistance and wax feeling.

PPW-0931 has uniform particle size and shape,high melting point, good transparency, and can be easily dispersed. PPW-0931 is suitable for solvent-based coating; improves scratch resistance, and blocking resistance to higher temperatures. PPW-0931 has synergistic effect, helps to prevent the precipitation of the silica matting. When used with silica, the silica and polypropylene wax proportion is about 1:1 to 4:1.When added to the powder coatings, PPW-0931 helps improve the powder coatings hardness, and the scratch resistance. It also improves the wear performance, and can assists in matting of powder coatings.

Moplen EP120P is a Polyolefin polymers for extrusion coating

Takaroku Shoji P004-NFS 4 has excellent flame retardancy. We are developing various grades in order to provide customers with materials that are balanced in terms of environmental safety, molding processability, physical properties, etc. at a low price.

PEW-2015 is water-based wax dispersion with high solid content, especially suitable for high solid content formula, easy to use and stable for storage. With outstanding abrasion resistance in colored ink. In water-based coatings, PEW-2015 provide good abrasion&scratch resistance, matting, anti-sticking effect and with smooth hand-feeling. In leather finishing agent, it can provide very good abrasion resistance, stain resistance and wax feeling.

Michem® Lube 511 provides excellent water beading, water repellence, release and anti-block for seed coatings, wood and architectural coatings.

Marcus Oil and Chemical M3400P is a low molecular weight polyethylene wax which comes in in liquid, pastille, flake and powder form for convenience of use.

TABOREN® PC 33 T 30-066 is a PP copolymer, Filler: Mineral filler, Stabilization: UV

Optirub™ OP A is a micronized, oxidized polyethylene that easily disperses into aqueous systems. Optirub OP A is processed to a 12 micron average particle size and formulated to give excellent rub resistance, lubricity, gloss and anti-blocking properties. Addition levels range from 0.5 to 2%, depending upon application requirements.