Products in Building & Construction: Composites

AFCONA 2723 is a defoamer and air-releaser for unsaturated polyester, polyurethane, UV, and epoxy resin systems. It is recommended for thin-layer (gel coat), casting resins, and epoxy resin systems (e.g. floorings), as well as for room temperature curing of unsaturated polyesters used in glass fiber-reinforced systems.

AGC Chemicals Americas, Inc. LUMIFLON® LF-600X consists of alternating fluoroethylene and alkyl vinyl ether segments (FEVE). The fluorinated segments provide outstanding UV stability, weather resistance, and chemical resistance, while the vinyl ether segments provide solvent compatibility and crosslinking sites. LUMIFLON resins are used to make ultra-weatherable coatings for architectural, aerospace, automotive, and industrial maintenance markets. LUMIFLON LF-600X is a moderate OH number resin. It is typically used to formulate coil coatings where flexibility and excellent weatherability are required. The major market where LF-600X finds application is the architectural market. However, LF-600X is also being used in ambient cure applications where high coating flexibility is required, for example, in coatings for plastics.

Circa 1850® Stain'n Varnish is both a wood stain and a varnish finish in one. Its unique gel formulation maintains a consistent blend of stain and varnish throughout the can, so there's no mixing or stirring required. As a result, you ensure uniformity from the beginning of your project to the end. And because it's a gel, it goes on without runs, drips or brush marks. Stain'n Varnish can be used on virtually any surface including wood furniture, molding, paneling and floors, pottery, metal, plastic, fiberglass, masonite and composites (or composite doors). Stain'n Varnish comes in 22 pre-mixed colors (and about a million custom-tinted colors) to suit any decor.

Sunspacers™ 04.X are finely divided, optically clear, solid fused amorphous silica micronized powders. This product is specially engineered for paints, liquid and powder coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These micronized powders increase corrosion resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including abrasion, mar and scratch resistance. Sunspacers™ 04.X have a median particle size of approximately 3-4 microns, with a particle size range of 0.5 microns to 13 microns.

NANOMYTE® SR-500EC-UVP is a transparent coating designed to provide easy-to-clean surfaces with excellent weatherability and UV protection for underlying substrates. The product, a hard, dense and smooth coating, is a nanostructured composite consisting of organic and inorganic phases. The coating resists scratching and chipping, strongly adheres to metal, glass and ceramic surfaces, and has superior water repellency and soil resistance. SR-500EC-UVP is a single component product that is easily applied by dip, spray or brush techniques and cured at room temperature.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

Keyland Polymer UV/EB resin UVP-1300 is an unsaturated polyester methacrylate resin that is cured with UV/EB energy. It is used in powder coatings, as an additive in ink, toner, and overlay varnish applications, and as an additive in 3D additive manufacturing applications.

Keyland Polymer UV/EB Resins UVE-5100 is an unsaturated epoxy acrylate resin for use in powder coatings, as an additive in ink, toner, and overlay varnish applications, and as an additive in 3D additive manufacturing applications.

GRANICOAT® Alicon is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

UC Coatings Stay Clean Moss & Algae Prevention Solution - Ready to Use contains a mold and algae inhibitor that protects the film it forms on substrates from microbes. Stay Clean’s water-based acrylic binder chemistry will adhere to most porous surfaces. It is delivered in concentrated form and is easy to dilute, mix, and apply. Stay Clean combines high performance, ease of use and consumer safety with the environmentally-friendly benefits common to water-based technologies.

BRIOMICA® 82 is a dry-ground ultra-white fine mica powder.

FSS 45DC™ is a 100% solid, fast setting, plural component, polyurea elastomer and high performance coating. FSS 45DC is primarily designed for properly prepared concrete and masonry, due to it’s higher elongation and extended gel time, but will bond tenaciously to steel and other properly prepared substrates. FSS 45DC is an economical coatings solution for industrial applications requiring a resilient liner for waterproofing and/or abrasion resistance. FSS 45DC can be applied horizontally, vertically, and overhead, making it ideal for industrial applications with a variety of substrates, and complex geometries.

BRIOMICA® 262 is a dry-ground ultra-white small mica flakes.

UC Coatings Stay Clean Moss & Algae Prevention Solution - Concentrate contains a mold and algae inhibitor that protects the film it forms on substrates from microbes. Stay Clean’s water-based acrylic binder chemistry will adhere to most porous surfaces. It is delivered in concentrated form and is easy to dilute, mix, and apply. Stay Clean combines high performance, ease of use and consumer safety with the environmentally-friendly benefits common to water-based technologies.

Defoamer and air-releaser for unsaturated polyester, Polyurethane, UV and epoxy resin systems

FlameOFF® Fire Barrier paint is a decorative, thin-film intumescent coating designed for fire protection of Gypsum/Sheetrock and Wood interior applications that require ASTM E119, ASTM E84, NFPA 251, ULC CAN S-101.

Ulmer Weiss 1-2 is a fine calcium carbonate granulate designed for use as a filler, pigment, mixing agent, or raw material in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paperboard, paper, detergents, rubber, cleaning mixtures, dyes, pigments, and polishing mixtures. Ulmer Weiss 1-2 is similar to sand or gravel in appearance with a characteristic odor and grain size of 1.0-2.0. This product does not flash and is non flammable.

Juraperle LMO is a coarse calcium carbonate powder designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, detergents, rubber, paper, paperboard, cleaning mixtures, and polishing mixtures. Juraperle LMO is a solid powder in appearance with a characteristic odor and a loose bulk density of 1.3 g/cm3.

GRANICOAT® Alexander is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

Ulmer Weiss SPH is a coarse calcium carbonate powder designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paper, paperboard, paints, varnishes, coatings, printing inks, mastics, soaps, detergents, rubber, cleaning mixtures, and polishing mixtures. Ulmer Weiss SPH is a solid powder in appearance with a characteristic odor and a loose bulk density of 1.35 g/cm3.

Blome International Primer 71 is a two-component urethane-based primer system developed to enhance secondary bonding performance. Blome Primer 71 significantly improves inter-laminar bond strength. This product utilizes a moisture activated curing system and contains no methylene chloride. It has a versatile bonding characteristics and excellent tack retention.

Abocoat 8508-1 excels as a protective and decorative coating for concrete, metal, wood and composite surfaces, indoors and outdoors. It is applied to floors, walls, machinery and installations in industrial, marine, and architectural environments. It is an excellent base coat for polyurethane and other coatings.

Wilko Paint Wilkopon Primer Gray Wilko No. 342.22 is a two-component epoxy polyamide primer that has good early recoat properties. It has excellent sanding and filling properties, which makes it ideal for refinishing surfaces that have been previously coated with epoxies and urethanes. It has excellent adhesion to a wide variety of substrates including concrete, treated galvanized & stainless steel, etched aluminum, and fiberglass-filled polyester plastics.

GRANICOAT® Accent is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

GRANICOAT® Nury is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

PLT 2 is particularly indicated for the printing on ABS, rigid PVC, wood, paper and cardboard, as bicomponent ink also on pre-treated PE and PP, thermosetting plastics, metal, varnished surfaces, polyamide (PA).

MICA-SOFT® 15/12 W is a wet-ground silky pure mica fine powder.

Wilko Paint Wilkopon Primer Red Oxide Wilko No. 347.49 is a two-component epoxy polyamide primer that has good early recoat properties. It has excellent sanding and filling properties, which makes it ideal for refinishing surfaces that have been previously coated with epoxies and urethanes. It has excellent adhesion to a wide variety of substrates including concrete, treated galvanized & stainless steel, etched aluminum, and fiberglass-filled polyester plastics.

Intumax LAY41 is a unique one component latex fire retardant - intumescent coating based on our proprietary non-halogenated phosphate technology. All of our phosphates are manufactured in house for our exclusive use. When exposed to heat and/or fire, INTUMAX®LAY41 forms a continuous, dense char foam that protects products from both heat and flame. Additionally, INTUMAX®LAY41 offers very low smoke generation during char formation. We have achieved an equivalent Class A flame spread rating in house. The active ingredients in INTUMAX® products are not soluble in water and will not leach out over time. INTUMAX®LAY41 is recommended for use as a coating for wood, composites, plastics or metals. The viscosity is easily reduced by the addition of water. Pigments, anti-settling agents, and other flame retardants may also be incorporated. INTUMAX®LAY41 can be brushed on, rolled on, or sprayed on. 2 coats are recommended at a minimum. Wait minimum 30 minutes between coats.

GRANICOAT® Spray Chip2 is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

Ulmer Weiss 6-8 is a fine calcium carbonate granulate designed for use as a filler, pigment, mixing agent, or raw material in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paperboard, paper, detergents, rubber, cleaning mixtures, dyes, pigments, and polishing mixtures. Ulmer Weiss 6-8 is similar to sand or gravel in appearance with a characteristic odor and grain size of 6.0-8.0. This product does not flash and is non flammable.

GRANICOAT® Mountain is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

Abocoat 8508-3 is the first choice for heavy-duty protection and rebuilding of smooth, spalled, cracked or pitted floors. Apply to concrete, masonry, wood, metal, glass and composite surfaces. Ideal for seamless floors in heavy-traffic areas. Can be used with sand or grit to make a great anti-slip surface.

BRIOMICA® 212 is a dry-ground ultra-white mica powder.

IMI Fabi HTP1 is used as Top coats - General industry Wood Varnish.

GRANICOAT® Sparkle is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.