Products in Building & Construction: Asphalt

Pangel B20 is a powdered additive with a high thickening and anti-settling capacity for intermediate polarity systems, particularly recommended for systems based on aromatic and unsaturated polyester type solvents. It provides thixotropic, suspension and sagging-resistance properties to systems based on aromatic and unsaturated polyester type solvents, Pangel B20 does not require the use of a polar activator for its dispersion.

Pangel® B20 is a rheological additive derived from sepiolite (hydrated magnesium silicate), with its particle surface organically modified to ensure compatibility with medium and low polarity systems or solvents. It forms a three-dimensional network of particles, enhancing the viscosity and thixotropy of the end product. In epoxy coatings, Pangel® B20 offers the option for partial or complete substitution of fumed silicas and organophilic bentonites typically used as rheological additives, presenting additional cost-effective benefits in formulations.

Domemul AA 9269 is a pure acrylic APEO-free emulsion designed for waterborne road marking coatings. The resin can also be used for fast drying waterborne coatings, including high humidity and low temperature environments.Features & BenefitsAcrylic emulsion for roadmarking paintsVery fast dryingGood water resistanceGood durability, non yellowingGood adhesion on asphalt, concrete

Domemul AA 7601 is an acrylic APEO-free emulsion designed for waterborne road marking coatings and paints for metal surfaces. The resin can also be used for fast drying waterborne coatings, also in high humidity and low temperature environments.Features & BenefitsWaterborne road marking coatingsVery fast dryingExellent adhesion on asphalt, concrete, metal

Rovene 5044 is a very soft carboxylated styrene-butadiene emulsion designed for formulation of permanent label and construction adhesives. It is used in the formulation of permanent label and construction adhesives which are high in peel and tack, and thus require a minimum amount of tackifier. Rovene 5044 was designed to give excellent performance and compatibility with a wide variety of tackifiers.

Domacryl 855 60 T is an air drying thermoplastic acrylic resin for the preparation of the pigmented and transparent coatings. This resin is recommended for spray-application paint for road marking, with good adhesion to asphalt, concrete and metal.Features & BenefitsSpray applicationGood adhesion to asphalt, concrete and metal

Domacryl 857 55 X is an air drying polyacrylic resin developed for the preparation of the pigmented and transparent coatings for metal. This resin is also recommended for spray-application paint for road marking, rapid drying with good adhesion to asphalt, concrete and metal.Features & BenefitsSpray applicationRapid dryingGood adhesion to asphalt, concrete and metal

Domacryl 857 50 BAc is an air drying polyacrylic resin developed for the preparation of the pigmented and transparent coatings for metal. This resin is also recommended for spray-application paint for road marking, rapid drying with good adhesion to asphalt, concrete and metal.Features & BenefitsSpray applicationRapid dryingGood adhesion to asphalt, concrete and metal

Domacryl 856 60 T is an air drying thermoplastic acrylic resin developed for the preparation of the pigmented and transparent coatings with high solid content. This resin is recommended for spray-application paint for road marking, rapid drying with good adhesion to asphalt, concrete and metal.Features & BenefitsSpray applicationGood adhesion to asphalt, concrete and metal

AC-EAGLE (TP-60T60)60% is thermoplastic acrylic resin for road marking and masonry paints.

Rovene 6121 is a low glass transition temperature styrene-acrylic polymer that offers flexibility during movement of the substrate and water resistance. Rovene 6121 also exhibits excellent tensile strength and maintains elongation properties when compounded with fillers.

Rovene® 6120 is an all acrylic polymer that offers a balance of properties within elastomeric roof coatings. Rovene 6120 can be formulated to meet or exceed ASTM 6083, Type 1. Rovene® 6120 exhibits adhesion to substrates, balance of stength and flexibility with excellent water resistance.

BarrierPro 4551 is a carboxylated styrene-butadiene emulsion with excellent strength properties, high resistance to liquid water and water vapor, high blush resistance and excellent adhesion to multiple construction substrates. BarrierPro 4551 has excellent stability with dry-add inorganic fillers and sets quickly into a low tack, high strength, water resistant film. BarrierPro 4551 is also a good base polymer for blending with other BarrierPro products to allow a membrane to be custom tailored to a specific strength and/or flexibility need.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

BarrierPro 4555 is a styrene-butadiene emulsion polymer of low stiffness. It dries to form a soft but tough film. Its softness makes it excellent for water proofing where films must remain flexible at below-freezing temperatures. Features: Highly stable Cured films are tough and flexible below freezing temperatures Cured films have good water resistance Hydrolysis resistant Filler compatible

Rovene 6119 is a low glass transition temperature styrene-acrylic polymer that offers flexibility during movement of the substrate and water resistance. This polymer also exhibits excellent tensile strength and maintains elongation properties when compounded with fillers.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

DeVere Chemical Ultra Kote is a superior, metal cross-linked floor finish with 18% solids. It is designed to meet today’s demands for fast drying, high gloss, and low maintenance finishes. Ultra Kote is designed to be buffed once a week or less. Choose this product for super hardness, high wet-look gloss, durability, and slip resistance.

AC-EAGLE (TP-60X60)60% is thermoplastic acrylic resin for road marking and masonry paints.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

General purpose, penetration asphalt primer used for the preparation of all types of surfaces prior to the application of hot or cold asphalt coatings. 108 Asphalt Primer is a controlled preparation of a highly ductile, soft asphalt in a refined solvent.

Polaroof RAC-OZ™ is a two-component liquid urethane system that incorporates oxazolidone performance enhancements. chemistry. It cures to a reflective state. a rubber-like finish that is outstanding toughness and durability POLAROOF RAC-OZ is an energy supplement. -highly effective waterproofing membrane that is resistant to the spread of fire and is intended for situations in which tensile strength, chemical and oil resistance, and total waterproofness surface area is required.

Deqing Toda Sanfeng Pigment Toda Color TSY-2 is fine micronized yellow iron oxide, easy dispersion type pigments.

Hydro Seal™ 300 formulas represent research and service in protecting buildings since 1970. Hydro Seal 300™ is a versatile, waterborne emulsion, water repellent and stain protector. Hydro Seal 300™ offers fast and effective protection against U.V. damage and stains. Hydro Seal 300™ protects a wide variety of surfaces including masonry, stucco, brick pavers, concrete, aluminum, marble, fabric and asphalt roofs.

Deqing Toda Sanfeng Pigment Toda Color 140 EDS is fine micronized red iron oxide, easy dispersion type pigments.

Polem A 1160 is a branched, castor oil-based polyol.

KARNAK 100 Non-Fibered Primer is a general purpose non-fibered emulsion primer prepared from an asphalt binder, carefully refined and emulsified in water by means of selected colloids. The asphalt emulsion thus produced is of heavy paint consistency. It is especially designed for use as a general utility prime coat for concrete, gypsum, masonry, brick, and metal surfaces over which waterproofing, dampproofing, roof coatings, membranes and other asphaltic products are to be applied. KARNAK 100 Non-Fibered Primer is designed specifically to prepare surfaces for torch-applied modified bitumen membrane, where solvent-based primers are not permitted or applicable. KARNAK 100 Non-Fibered Primer will not burn or support combustion in a liquid state and will not flash. This is a low odor coating that resists the absorption of exterior moisture

Extendospheres® SG-300 is our most versatile, general purpose hollow sphere grade. Sphere One’s Extendospheres® are low density, high strength hollow ceramic spheres. They can allow the formulator to reduce the weight and overall cost of their finished goods.

ROOFDX GOLD™ is a highly durable, rubberlike waterproofing coating with a stunning golden finish and exceptional elasticity. This remarkable "liquid gold" coating can be applied to all common roofing substrates and will give the roof a golden, metallic, rich luster at a fraction of the cost of gold leaf. ROOFDX GOLD™ can be sealed with a topcoat of CLEARCOAT 44 to provide an extra shiny, brilliant appearance and to maintain the bright finish; otherwise, a natural patina will develop over time.

The euroMinerals incomp special are multi-functional extenders based on talc and dolomite, ground to different fineness and talc content.

Juraperle 0,5-1,0 is a fine calcium carbonate granulate designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paperboard, paper, detergents, rubber, cleaning mixtures, and polishing mixtures. Juraperle 0.5-1 is similar to sand or gravel in appearance with a characteristic odor and is not flammable. This product has a grain size of 0.5-1.0.

Deqing Toda Sanfeng Pigment Toda Color TSY-1H is fine micronized yellow iron oxide, easy dispersion type pigments for heat resistance.

ShiraSol™ is a VOC-compliant, safe, low toxicity solvent that is an efficient, cost effective alternative to Mineral Spirits, Aromatic 100, Aromatic 150, Methyl Amyl Ketone, n-Butyl Acetate and other slow evaporating solvents. ShiraSol is formulated for use as a cleaner, primary or co-solvent in a variety of formulations involving aliphatic, aromatic and ketone solvent systems.

ROOFDX SUPER™ is a single-component urethane that has been specifically designed as a waterproofing membrane for all types of roofing. It cures to form a tough, elastic, waterproof seal and can be incorporated into roofing specifications that provide 10 to 20 years of roof protection ROOFDX SUPER™ contains corrosion inhibiting pigments that protect metals from rust and acid rain.

Deqing Toda Sanfeng Pigment Toda Color 100 EDS is fine micronized red iron oxide, easy dispersion type pigments.