Products in Other Industrial Applications: Polyamides

Korrels B.V. PA, unfilled is the most commonly used engineering thermoplastics in various markets due to their excellent strength and durability properties. At 4KTEC, we develop and commercialize a variety of polyamide compounds for a wide variety of applications. These customer specific compounds have the advantage that we can adapt them to significantly change the properties of the material and add values ​​to the material, such as extreme stiffness, high dimensional stability and low warp properties.

UBE NYLON 7034 B is a high viscosity PA6/12 Copolyamide. It is suitable for applications with indirect food contact according FDA and EU regulations. The grade can be used for cast film and blown film (air or water cooled).

UBE NYLON 5034 MTX1 is a medium viscosity Polyamide 6/6.6 copolymer for general application. It is suitable for all sizes of line, which require good softness.

UBE NYLON 1024 JI is plasticized and impact modified, high viscosity Polyamide 6. It is most suitable for application in contact with fuel, such as for multilayer fuel lines.

Korrels B.V. PA, unfilled, flame retardant, natural is the most commonly used engineering thermoplastics in various markets due to their excellent strength and durability properties. At 4KTEC, we develop and commercialize a variety of polyamide compounds for a wide variety of applications. These customer specific compounds have the advantage that we can adapt them to significantly change the properties of the material and add values ​​to the material, such as extreme stiffness, high dimensional stability and low warp properties.

ZELLAMID® 1100 is a heavy duty, high impact and chemical resistant polyamide 6 material appropriate for larger parts.

Polyamide 6 general purpose

PA6 glass fiber 30% reinforced V-0

Murylon® A GF, the properties of this material surpass the already impressive characteristics of Murylon® A. This is possible thanks to admixed glass fibers. The result: A clear improvement in cold flow behavior and dimensional stability. This enables higher static pressure loads to be endured. Production based on PA66.

This material combines the excellent properties of the Murylon® range with additional high tensile and burst strength, increased wear resistance, and a lower level of moisture absorption than Murylon® B. Production based on PA66.

UBE Nylon 5034 B is a PA6/6.6 copolyamide, produced by continuous polymerization process. It is a high viscosity grade suitable for numerous applications. The grade can be used for cast film and blown film (air cooled)..

Ubesta™ 3030 U is a high viscosity, non-reinforced and non-plasticized Polyamide 12 preferably for extrusion application. UBESTA 3030 U shows only low moisture absorption and therefore exceptional dimension stability..

Polyamide 6 general purpose

Agiplast Agimid 2496B00 has mechanical properties along with the chemical, physical and high aging resistance. Agimid PA12 grades includes flame retardant, conductive, antistatic, reinforcement with glass fibers characteristics. Agimid 2496B00 is PA 12 Antistatic.

PA6 Glass fiber 20% reinforced

Korrels B.V. PA, Impact modified is the most commonly used engineering thermoplastics in various markets due to their excellent strength and durability properties. At 4KTEC, we develop and commercialize a variety of polyamide compounds for a wide variety of applications. These customer specific compounds have the advantage that we can adapt them to significantly change the properties of the material and add values ​​to the material, such as extreme stiffness, high dimensional stability and low warp properties.

PA66, GF15, modified heat conductive, antistatic

High impact strength, Good elasticity, Toughness

PA6 Impact modified

TECACOMP PA66 TC gray 4057 is a Polyamide 66 (PA 66) polymer.

KEBABLEND / TC FE 191604 PA66 is a functionalized compound based on PA 66 with high thermal conductivity. Electrically insulating, good value for money.

Agiplast Agimid 240B120 has mechanical properties along with the chemical, physical and high aging resistance. Agimid PA12 grades includes flame retardant, conductive, antistatic, reinforcement with glass fibers characteristics. Agimid 240B120 is PA 12 according to DIN 73378 PHL.

ZELLAMID® 202 is a tough polyamide 6 material with high resistance to abrasion and impact.

PA6 Impact modified

UBE Nylon 1030J is flexibleand used in t-die cast blown process.

Polyamide 6 general purpose

TECACOMP PA66 TC gray 3974 is a Polyamide 66 (PA 66) polymer. It is processed by using injection molding.

Agiplast Agimid 248N070 has mechanical properties along with the chemical, physical and high aging resistance. Agimid PA12 grades includes flame retardant, conductive, antistatic, reinforcement with glass fibers characteristics. Agimid 248N070-S is a PA 12 according to UL 94V2.