Products in Oil, Gas & Mining: Wide Temperature Operating Range

HNBR has excellent resistance to sour oil and gas, steam, hot water and ozonePhysical properties such as tensile and tear strength, elongation, abrasion resistance and compression set are excellent, while compounds exhibit good dynamic behavior at elevated temperaturesHNBR has excellent resistance to sour oil and gas, steam, hot water and ozoneLike EPDM, hydrogenated nitrile rubber can either be cured with sulfur or peroxide, depending upon which properties are the most importantComponents in HNBR offer an excellent range of performance at a cost between nitrile rubber and fluoroelastomers (FKM).

Viton® 9164-90 is 90-durometer fluorocarbon; excellent resistance to fuels, alcohols, and solvents. (Polymer: ETP)

Nitrile 4200-70 is nitrile seal ideal for use in a variety of applications.Parco 4200-70 seals are suitable for applications ranging from -35 to +250°F.

Nitrile 4262-75 is a excellent compatibility with drilling muds and petroleum oils; withstands service demands of heavy equipment hydraulic systems; Parco’s lowest compression-set, sulfur-cure nitrile.

FBT 1000 is a FKM With PTFE Film, wire mesh and aramid. 3.54mm”; Single Ply Wire EPDM Belt.

FAIRPRENE®EXP-15WF Alpha's code EXP-15WF is a fluorosilicone coated polyester that has a nominal temperature range of -65˚F to 300˚F. The Fluorosilicone used in the manufacturing process is a premium polymer providing excellent chemical and fuel resistance. Using polyester as the re-enforcement substrate provides good stability for the fluorosilicone in dynamic applications. The EXP-15WF offers excellent chemical resistance in many different fuel mixtures over a broad temperature range.

Kestlub® is one of the most important developments in the Kestamid® product range. Kestlub® is a special type of cast polyamide ideal for bearings. It is produced by adding lubricants to cast polyamide through special processes. It performs extremely well in bearing applications as it is self-lubricated.

FBT 1001 is a FKM With PTFE Film and wire mesh. 3.54mm”; Single Ply Wire EPDM Belt

Flurocarbon 9266-75 is fluorocarbon seal ideal for military and aerospace applications. Seals made from our popular 75-durometer fluorocarbon 9266-75 have outstanding physical properties and are competively priced.\

Kyflon™ 3073 combines excellent low temperature performance with broad chemical resistance.

FAIRPRENE®CD-6004 is Uncured epichlorohydrin (ECO) coated polyester fabric useful in seal and diaphragm applications that require good resistance to flame and excellent resistance to oil and ozone. Designed for excellent processability on automated molding equipment.

Nitrile 2295-70 is Resists fuels rich in alcohol better than 4200-70 general-purpose nitrile seals; UL-listed for gasoline, diesel fuel, kerosene, naphtha and alcohol blends with up to 15% ethanol and methanol concentrations, high ACN content for very low swell in fuels; compound not recommended for hot air or ATF.

Flurocarbon 9167-60 is fluorocarbon seal designed for low-pressure applications requiring broad chemical resistance at low temperatures. Parco 9167-60 seals are suitable for static applications ranging from -65 to +450°F and dynamic applications ranging from -40 to +450°F.

Viton® 9131-75 is 75-durometer fluorocarbon having excellent resistance to fuel, good resistance to compression set, and improved low-temperature flexibility (TR-10 value of -10°F) and is UL-listed.

RL292 can withstand constant temperature extremes of -65˚ F to 450˚ F (-54˚ C to 232˚ C) with brief excursions to 600˚ F (316˚ C). Silicone-coated Pyroglas® cloths have excellent resistance to most chemicals and oils, and have indefinite shelf life at room temperature. Alpha Associates silicone-coated Pyroglas® cloths are made from proprietary high grade silicone rubber and non-asbestos fiberglass material, to AMS 3320 Rev. G.

Flurocarbon 9500-75 is general-purpose 75-durometer fluorocarbon having excellent resistance to compression set and low cost.

Nitrile 0228-70 is seal which meets the critical requirements of the motor vehicle industry to ensure vehicle safety and performance.

FAIRPRENE®FG-1420 is Fluoroelastomer (fluorocarbon-based synthetic polymer such as 3M™ Dyneon™, Daikin DAI-EL™ and Solvay Tecnoflon®) coated Nomex® for flat cut diaphragm type applications. The combination of fluoroelastomer and high temperature textile produces a coated fabric with good temperature and chemical resistance in harsh environments.

Flurocarbon 9162-95 is 95-durometer fluorocarbon having excellent resistance to compression set, and excellent resistance to explosive decompression and extrusion.

Nitrile 2276-70 is incorporating an organic internal lubricant, 2276-70 seals are well suited for dynamic applications requiring low-friction materials; very high ACN content and low plasticizer level provide oil resistance; used on power steering reservoir caps.

Viton® 9166-75 is 75-durometer fluorocarbon; excellent resistance to fuels, alcohols, and solvents; blue. (Polymer: ETP)

Flurocarbon 9021-95 is 95-durometer fluorocarbon having excellent resistance to compression set and better extrusion resistance.

FAIRPRENE®FG-1425 is Fluoroelastomer (fluorocarbon-based synthetic polymer such as 3M™ Dyneon™, Daikin DAI-EL™ and Solvay Tecnoflon®) coated Nomex® for flat cut diaphragm type applications. The combination of a fluoroelastomer coating and high temperature textile produces a coated fabric with good temperature and chemical resistance in harsh environments.

Nitrile 4367-70 nitrile seals are ideal for use in low temperatures and hydraulic fluids. Parco 4367-70 seals are suitable for applications ranging from -65 to +275°F.

FAIRPRENE®SG-0101 is Silicone coated Fiberglass for seal and vacuum type applications. The combination of a Silicone coating and high temperature textile produces a coated fabric with good temperature stability in harsh environments.

Flurocarbon 9115-95 is 95-durometer fluorocarbon having excellent resistance to steam and acid, good resistance to compression set, and excellent resistance to explosive decompression and extrusion.

Viton® 9066-75 is 75-durometer fluorocarbon having excellent resistance to compression set, and improved low-temperature flexibility (TR-10 value of -25°F) and meets the requirements of Aerospace Material Specification (AMS) R 83485.

Nitrile 4067-70 is nitrile seal ideal for use in low temperatures and hydraulic fluids. Parco 4067-70 seals are suitable for applications ranging from -65 to +240°F.

Nitrile 0209-70 is a high ACN content with low plasticizer level provides excellent resistance to petroleum oils, automatic transmission fluid (ATF), and crude oil; formulated as a transfer-moldable variant of Parco general-purpose nitrile 4200-70 for producing thick cross-section custom molded parts; used extensively in oil tool seals and packing elements for pressures to 1,500 psi.

RL 7542 is silicone fiberglass with aramid. 0.0625" ; 1 Ply Aramid Inserted Silicone Belt.

Da/Pro Rubber Neoprene/Chloroprene is a brand name developed by DuPont Performance Elastomers. It is a name for a family of synthetic rubbers based on polychloroprene. DuPont developed this family of rubbers as an oil-resistant alternative to natural rubber.Because of these properties, neoprene rubber is useful in a variety of applications. Neoprene rubber gaskets and neoprene grommets are used in devices that are exposed to extreme chemicals and temperatures. Neoprene gaskets are often used in automotive and oil & gas industry as a seal against corrosive environments and weather elements. Neoprene grommets are used in electrical connectors in the aerospace and electronic industries. Neoprene rubber has become a popular material choice in modern applications ranging from clothing to electronic cases.

Flurocarbon 9505-75 is general-purpose 75-durometer fluorocarbon having excellent resistance to compression set, and low cost and is brown in color.

Nitrile 4457-65 is nitrile seal ideal for use in low temperatures and hydraulic fluids.Parco 4457-65 seals are suitable for applications ranging from -65 to +200°F.

Biresin® CR144 is a three component, anhydride cured, low viscosity epoxy resin system suitable for the production of high performance fi bre reinforced composites.

Nitrile 4456-70 is containing no ester plasticizers, compound 4456-70 provides superior compatibility with ABS, polycarbonates and other stress-sensitive plastics used in injection-molded automotive power steering seals.

Nitrile 4465-65 is formulated expressly for use in low-temperature aviation fuel systems; low ACN content enables compounds to meet requirements of Aerospace Materials Specification (AMS) 7271, QPL listed, including passing low-temperature fuel seal test at -65°F.