Products in Oil, Gas & Mining: Gaskets

HNBR has excellent resistance to sour oil and gas, steam, hot water and ozonePhysical properties such as tensile and tear strength, elongation, abrasion resistance and compression set are excellent, while compounds exhibit good dynamic behavior at elevated temperaturesHNBR has excellent resistance to sour oil and gas, steam, hot water and ozoneLike EPDM, hydrogenated nitrile rubber can either be cured with sulfur or peroxide, depending upon which properties are the most importantComponents in HNBR offer an excellent range of performance at a cost between nitrile rubber and fluoroelastomers (FKM).

NBR 1845 is essentially an acrylonitrile (17-20%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Low content of acrylonitrile, good frost-resistance, satisfactory oil resistance.

VHD - 2 PTFE is a virgin high density free flow ptfe resin composition by weight % and filler description of 100% Virgin Granular PTFE. Poly-smith is supplier of PTFE in Compression Molding, Blending, Free Flow, and Pre-Sintered grades. We also offer all filled granular compounds, in Low Flow, Free Flow, and Pre-Sintered forms, as well as Reprocessed PTFE. We only source the finest grades of PTFE from ISO Certified Suppliers both worldwide and domestically. You can be confident that we can and will supply the exact material needed for your specific application.

VHD - 3 PTFE is virgin high density free flow ptfe resin a composition by weight % and filler description of 100% virgin granular ptfe . Poly-smith is supplier of PTFE in Compression Molding, Blending, Free Flow, and Pre-Sintered grades. We also offer all filled granular compounds, in Low Flow, Free Flow, and Pre-Sintered forms, as well as Reprocessed PTFE. We only source the finest grades of PTFE from ISO Certified Suppliers both worldwide and domestically. You can be confident that we can and will supply the exact material needed for your specific application.

NBR 1855 is essentially an acrylonitrile (17-20%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Low content of acrylonitrile, good frost-resistance, satisfactory oil resistance.

NBR 4045 is essentially an acrylonitrile (36-40%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. High content of acrylonitrile, very high oil resistance.

EB 1200 is a Ethyle Propylene Diene monomer with aramid. 125” Single Ply Aramid Inserted EPDM Belt[Press/Roto Cured].

fluteck™ C200 PCTFE is a high performance thermoplastic fluoropolymer based on Polychlorotrifluoroethylene

Alphatex 500 is a PTFE Impregnated Fiberglass.

Petroz™ 375 durometer general purpose FFKM with exceptional compression set properties and excellent chemical resistance.

Petroz™ 390 durometer FFKM with unsurpassed compression set properties while maintaining excellent chemical resistance.

FB 1102 is a Flurolastomer with wire mesh and aramid. 0.125" ; Single Ply Fiberglass Fluoroelastomer Belt [Press Cured].

RL292 can withstand constant temperature extremes of -65˚ F to 450˚ F (-54˚ C to 232˚ C) with brief excursions to 600˚ F (316˚ C). Silicone-coated Pyroglas® cloths have excellent resistance to most chemicals and oils, and have indefinite shelf life at room temperature. Alpha Associates silicone-coated Pyroglas® cloths are made from proprietary high grade silicone rubber and non-asbestos fiberglass material, to AMS 3320 Rev. G.

Kalrez® 4079 perfluoroelastomer o-rings were introduced in the 1980’s. Kalrez o-rings are effective sealing elements in high-heat and aggressive chemical environments. Kalrez is “A” rated in more than 1800 chemicals and has a maximum continuous service temperature rating of 600°F/316°C.

FBT 1001 is a FKM With PTFE Film and wire mesh. 3.54mm”; Single Ply Wire EPDM Belt

Kyflon™ 3098 combines excellent low temperature performance with broad chemical resistance and high hardness.

FLUORONOID® FL 105 is a glass fiber filled PTFE. This material may be inert gas sintered to further improve creep properties and reduce porosity and gas permeability. There will be a consequent loss of tensile properties.

Petroz™ 595 durometer FFKM specifically compounded for rapid gas decompression (RGD) resistance that consistently outperforms competitors’ RGD compounds.

NB 2000 is a Neoprene fiberglass(two plies) with CR. 0.250" ; 2 Ply Fiberglass Inserted Neoprene Belt [Press Cured].

Kyflon™ 3073 combines excellent low temperature performance with broad chemical resistance.

FB 1001 is a Flurolastomer with aramid. 0.125" ; 1 Ply Aramid Fluoroelastomer Belt [Press Cured].

FBT 1000 is a FKM With PTFE Film, wire mesh and aramid. 3.54mm”; Single Ply Wire EPDM Belt.

FLUORONOID® FL 106 is a Bronze and molybdenum disulphide filled PTFE.

Fluoronoid® FL 100 Grade 1 is a virgin PTFE has a wide range of applications that make use of its extreme chemical resistance, very low coefficient of friction, excellent electrical insulation properties and thermal stability up to 250°C.

Alphalam X 130 is a PTFE Impregnated Fiberglass with Cast PTFE Film.

Thermoseal C-4433 is the ultimate steam sheet. It is excellent at higher temperatures and has outstanding load-bearing properties and excellent creep relaxation properties. This all-purpose utility sheet's range of applications is expanded for most petroleum-based media such as lubrication and hydraulic oils, solvents, and natural gas.

EB 1001 is a Ethyle Propylene Diene monomer with wire mesh. 125” Single Ply Aramid Inserted EPDM Belt[Press/Roto Cured].

Da/Pro Rubber Neoprene/Chloroprene is a brand name developed by DuPont Performance Elastomers. It is a name for a family of synthetic rubbers based on polychloroprene. DuPont developed this family of rubbers as an oil-resistant alternative to natural rubber.Because of these properties, neoprene rubber is useful in a variety of applications. Neoprene rubber gaskets and neoprene grommets are used in devices that are exposed to extreme chemicals and temperatures. Neoprene gaskets are often used in automotive and oil & gas industry as a seal against corrosive environments and weather elements. Neoprene grommets are used in electrical connectors in the aerospace and electronic industries. Neoprene rubber has become a popular material choice in modern applications ranging from clothing to electronic cases.

FLUORONOID® FL 115 is a Carbon filled PTFE. Carbon filler gives good compression and wear resistance, good thermal conductivity and low permeability.

RL 7542 is silicone fiberglass with aramid. 0.0625" ; 1 Ply Aramid Inserted Silicone Belt.

fluteck™ F100 PFA is a thermoplastic fluoropolymer based on perfluoroalkoxy resin (PFA).