Products in Other Wire & Cable Applications: Gaskets

NBR 1855 is essentially an acrylonitrile (17-20%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Low content of acrylonitrile, good frost-resistance, satisfactory oil resistance.

NBR 1845 is essentially an acrylonitrile (17-20%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Low content of acrylonitrile, good frost-resistance, satisfactory oil resistance.

ISOTHANE 1080A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

Neoplast™ 180 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Neoplast™ 173 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Hangzhou Hi-Tech Fine Chemical ATH-6S is a flame retarding for a variety of rubber and plastic products, such as mining transport belt, hose, rubber, carpet, rubber gaskets, wire and cable materials and sheathing, building materials, especially for blocking free foaming processfuel in the production of the bubble can be given to the characteristics of products, flame retardant, smoke, anti-static.

ISOTHANE 1065A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

Polsil® GUM 122/60 is a special grade heat cured elastomer with higher thermal resistance.

ISOTHANE 1085A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

Neoplast™ 155 FT SW B are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Dongguan Baoxu Chemical Technology Ltd Pigment Yellow 139 is a transparent red shade yellow pigment, recommended for films and PP fibers application, there are two PY 139, which 2R is Comparable With BASF 1841,which 3R is Comparable With BASF 2140.

Neoplast™ 145 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Neoplast™ 163 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Polsil® GUM 210/65 is a special grade heat cured elastomer with higher thermal resistance.

fluteck™ C200 PCTFE is a high performance thermoplastic fluoropolymer based on Polychlorotrifluoroethylene

MARFRAN® E FG1 is a TPE-SSBS base polyolefin polymers and others with SEBS elastomer. This Compounds for injection molding and extrusion: soft to the touch, it guarantees excellent resistance to aging and atmospheric agents, low compression set, high elasticity, easy to work, colorable and high transparency.

ISOTHANE 1090A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

P & P Technology Carbon Loaded Silicone EC-C which when properly catalyzed can be considered for applications requiring conductivity such as EMI gaskets, conductive sheaths for ignition cable core, electronic keyboard contacts, etc.

MARFRAN® B CV2 is a TPE-SSBS base polyolefin polymers or styrenic polymers with SBS elastomer. This compounds for injection and extrusion molding, soft to the touch, easy to work, colorable, high transparency, highly elastic, resistant to abrasion, in various flexural and hardness modules

MagPro® 150 is a high active micronized magnesium oxide produced from one of the purest brucite deposits in the world. The product has a very low level of chlorides and other volatiles, which does prevent any corrosion problems.

ISOTHANE 1070A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

Neoplast™ 155 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Dongguan Baoxu Chemical Technology Ltd Pigment Orange 13 is pure and brilliant orange which application is Elastomer & Rubber, Fiber(PE/PP/PA). Comparable with Clariant Orange G, Orange GR.

Neoplast™ 135 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Polsil® GUM 213/60 is a special grade heat cured elastomer designed for flame-retardant applications.

Neoplast™ 180 C are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

MARFRAN® B F2 is a TPE-SSBS base polyolefin polymers or styrenic polymers with SBS elastomer. This Compounds for injection and extrusion molding, soft to the touch, easy to work, colorable, high transparency, highly elastic, resistant to abrasion, in various flexural and hardness modules

Neoplast™ 180 HOFR are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Neoplast™ 173 C are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

ISOTHANE 1075A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

KEP® 110 produced by Kumho Polychem is a highly functional special synthetic rubber that is mainly used for automotive parts and has excellent resistance to heat, ozone, and chemicals. With a lower specific gravity compared with other synthetic rubbers, it can be applicable for high-filling mixing, meaning it has a high economic feasibility.

Plaox DODPA is a General purpose antioxidant for all elastomers; specially purified for many nonstaining and moderate discoloring applications such as cables, footware, flooring, gaskets, bicycle tubes and tires.

Da/Pro Rubber Neoprene/Chloroprene is a brand name developed by DuPont Performance Elastomers. It is a name for a family of synthetic rubbers based on polychloroprene. DuPont developed this family of rubbers as an oil-resistant alternative to natural rubber.Because of these properties, neoprene rubber is useful in a variety of applications. Neoprene rubber gaskets and neoprene grommets are used in devices that are exposed to extreme chemicals and temperatures. Neoprene gaskets are often used in automotive and oil & gas industry as a seal against corrosive environments and weather elements. Neoprene grommets are used in electrical connectors in the aerospace and electronic industries. Neoprene rubber has become a popular material choice in modern applications ranging from clothing to electronic cases.

Neoplast™ 180 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

MARFRAN® E FKK is a TPE-SSBS base polyolefin polymers and others with SEBS elastomer. This Compounds for injection molding and extrusion: soft to the touch, it guarantees excellent resistance to aging and atmospheric agents, low compression set, high elasticity, easy to work, colorable and high transparency.

MARFRAN® E M2 is a TPE-S SEBS base polyolefin polymers and others with SEBS elastomer. This Compounds for injection molding and extrusion: soft to the touch, it guarantees excellent resistance to aging and atmospheric agents, low compression set, high elasticity, easy to work, colorable, high transparency.