Products in Wire & Cable: Impact Modifier

METABLEN™ S 2130 is a silicone-acrylic-based rubber impact modifier optimized for flame retardant polycarbonate (PC) resins. It adds colorability, heat-aging resistance and impact strength to PC and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2001 is a silicone-acrylic rubber-type impact modifier with high impact strength in all temperatures and excellent weatherability. It can be used with ABS, PC, PLA, and other matrix resins in a variety of automotive, aerospace and electric and electronic applications. Features Can be used with recycled plastics Good weather stability Low temperature impact resistance *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S X-005 is a silicone-acrylic rubber-type impact modifier that provides flame retardance, hydrolysis resistance and impact strength. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesFlame retardantWeather stabilityHydrolysis resistanceImpact resistance even at low temperaturesLow friction*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2100 is a silicone-acrylic-based rubber impact modifier with good colorability and impact strength. It is used for polycarbonates (PC) and polycarbonate blends, polyvinyl chloride, engineering plastics and polyolefins in a variety of automotive, aerospace, consumer goods, and electric and electronic applications. METABLEN™ S-2100 provides ductility on facial impact tests, even after immersion of coating chemicals. The effect is maintained at higher molding temperatures. BenefitsEasy to processFlame retardancy for engineering plastics and polyolefins elastomersFeaturesGood colorabilityWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2200 is a silicone-acrylic-based rubber impact modifier with an epoxy-modified shell.Compatible with Polyethylene terephthalate (PET), polybutylene terephthalate (PBT), polyamide (PA) and alloy, it provides hydrolysis resistance, heat-aging resistance and impact strength for a wide range of automotive, aerospace and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

OPTIM® E-131 is a maleic anhydride modified very low density polyethylene. It is used for toughening of Polyamides such as Nylon-6 & Nylon 6, 6. It gives excellent mechanical properties at sub-zero conditions.

OPTIM® R-642 is a maleic anhydride modified Styrene Ethylene Butylene Styrene. It is a type of Polar Thermoplastic Elastomer offering good elasticity at low temperatures.

OPTIM® E-142 is a maleic anhydride modified linear low density polyethylene. It is used for toughening of Polyamides such as Nylon-6.

OPTIM® E-132 is a maleic anhydride modified low density polyethylene. It is used for toughening of Polyamides such as Nylon-6 & Nylon 6, 6. It gives excellent mechanical properties at sub-zero conditions.

OPTIM® E-126 is a maleic anhydride modified linear low density polyethylene. It is used for toughening of Polyamides such as Nylon-6 & Nylon 6, 6.

OPTIM® R-658 is a maleic anhydride modified elastomeric resin in granular form. It can be processed using plastics molding and extrusion techniques designed for polyolefins. The grafted polar groups on otherwise poyolefinic chains make it compatible with other polar and non-polar polymers. This affords many possibilities of extending base polymer properties like wettablity and toughening.

OPTIM® GE-344 is a glycidyl methacrylate modified ultra-low density polyethylene. It is used for toughening of Polycarbonates and Polyesters such as PET & PBT.

OPTIM® GE-340 is a glycidyl methacrylate modified polyethylene. It is used for compatibillizer and toughening of Polycarbonates and Polyesters such as PET & PBT.

Shandong Xuye New Materials CPE135AH has high plasticizing rate, which is suitable for high-speed extrusion. It can be total or part replaces ACR, MBS modifier.

Dragonite™ -XR is a halloysite-­‐based aluminosilicate clay exhibiting a rare, naturally occurring hollow tubular structure. Through its unique morphology and ideally-­‐suited chemistry, it enhances the properties of wide range of thermoset resins to meet the requirements of demanding applications. Dragonite™-XR is an untreated product grade with slightly lower reactivity and acidity due to 2% iron oxide content. It is recommended at loadings of 30 - 60 wt%.

Fine-Blend POE-g-MAH CMG5805-L is a maleic anhydride grafted polymer. The base polymer is a polyolefin elastomer with high flexibility, and it has white or light yellow particle appearance.

WELLPREN® IM900 is most suitable for substitution of Acrylic impact modifier (AIM) or blending with Acrylic impact modifier (AIM) with a certain percentage without adjusting the processing data and the formulation, resulting in an optimum performance /cost solution. All in, WELLPREN®RESIN helps fabricators and compounders meet increasing critically performance requirements and cost control needs.

IKAMOD 102 is a highly efficient impact modifier based on chlorinated polyethylene elastomer and acrylate chlorinated polyethylene elastomer.

MLPlastics Additive Masterbatches PE IM7017 Impact modifier by ML Plastics is an ethylene-acrylic ester copolymer. It improves splitting-, stress crack- resistance, low temperature- and impact resistance, weldability and processability. It can be processed by injection molding, extrusion and compounding. PE IM7017 Impact Modifier is compatible with polypropylene, polystyrene, polybutylene terephthalate, ABS, polyethylene, polyamide, polyethylene terephthalate, polycarbonate. It improves easy processing on standard processing equipment, reduces hardness and increases flexibility, impact strength at low temperature. It provides good adhesion to many substrates, high utilization temperatures, good organoleptic, environmentally sound, good compatibility and filler acceptance, thermal stability to the polymer. PE IM7017 Impact Modifier can be used in cables, masterbatches, construction, bags and for rigid polymers.

Zibo Fengyi Plastics CPE135A Impact Modifier of Hard PVC has fine unified physical function such as fine tenacity at low-temperature, high tensile strength and fine consistency coherency with PVC . In the right conditions,it can form three dimensional netted structure inside hard PVC products. So it has fine shock-resistance(shock strength).