Products in Parts & Components: Filler

MultiTech MultiFunctional K is a natural raw cellulose. MultiTech MultiFunctional K is a beige colored softwood product with a cubic structure. The main particle range is 70-150 µm. It is a sustainable material for various applications as reinforcement and functional filler.

CS series™ XPF0100S is a cross-linked polystyrene in highly spherical fine powder form. These cross-linked polystyrene particle materials exhibit high clarity, hardness, heat resistance and dimensional stability. CS Series™ cross-linked polystyrene materials are manufactured using TWO H Chem Ltd. Proprietary process technology.

Alteo SH100 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut. It is available from from 25 to 4 microns.

SILBOND® is for industrial use, mighty, workable silica sand deposits are of decisive importance. Nevertheless, chemical purity and constancy are not enough in order to apply silica directly as a raw material. In Quarzwerke plants silica sands are thoroughly prepared. The raw material has to pass exten-sive cleaning-, classification-, drying- and iron-free grinding processes in order to produce silica sands, flours and powders. For the production of silica flours and -powders with a defined grain size distribution separation processes are required in addition to iron-free grinding. Quarzwerke are able to produce silica powders with grain sizes down to 1 μm due to a fine-tuned combination of grind- and classification technology. Another refining step is the surface-treatment with silanes or silan-based substances which can be adjusted to the respective application.

Alteo SH60 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut. It is available from from 25 to 4 microns.

HALTEX® 310 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

HALTEX® 304 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

ADMAFINE SO-E2 is used in electronic devices, filler for epoxy molding compound, fillers for printed circuit boards. It is usesd as resin filling materials engineering plastics, filler for paint, filler for precise plastic molding. It is used in ceramics molding products and in anti-blocking materials.

HALTEX® 315 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

ADMAFINE SO-E1 is used in electronic devices, filler for epoxy molding compound, fillers for printed circuit boards. It is usesd as resin filling materials engineering plastics, filler for paint, filler for precise plastic molding. It is used in ceramics molding products and in anti-blocking materials.

ADMAFINE SO-E6 is used in electronic devices, filler for epoxy molding compound, fillers for printed circuit boards. It is usesd as resin filling materials engineering plastics, filler for paint, filler for precise plastic molding. It is used in ceramics molding products and in anti-blocking materials.

ADMAFINE SO-C4 is used in electronic devices, filler for epoxy molding compound, fillers for printed circuit boards. It is usesd as resin filling materials engineering plastics, filler for paint, filler for precise plastic molding. It is used in ceramics molding products and in anti-blocking materials.

ADMAFINE SO-E5 is used in electronic devices, filler for epoxy molding compound, fillers for printed circuit boards. It is usesd as resin filling materials engineering plastics, filler for paint, filler for precise plastic molding. It is used in ceramics molding products and in anti-blocking materials.

Xyal® 100 is very fine, high-purity aluminum oxide(Al2O3) with a high specific surface area, maked aggregate and agglomerate structure. Due to the electropositive chargeability and unique particle characteristics, XYAL100 leads to specific properties in various applications.

Alteo SH150 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut. It is available from from 25 to 4 microns.

ADMAFINE SO-E4 is used in electronic devices, filler for epoxy molding compound, fillers for printed circuit boards. It is usesd as resin filling materials engineering plastics, filler for paint, filler for precise plastic molding. It is used in ceramics molding products and in anti-blocking materials.

ADMAFINE SO-C2 is used in electronic devices, filler for epoxy molding compound, fillers for printed circuit boards. It is usesd as resin filling materials engineering plastics, filler for paint, filler for precise plastic molding. It is used in ceramics molding products and in anti-blocking materials.

ADMAFINE SO-C6 is used in electronic devices, filler for epoxy molding compound, fillers for printed circuit boards. It is usesd as resin filling materials engineering plastics, filler for paint, filler for precise plastic molding. It is used in ceramics molding products and in anti-blocking materials.

ADMAFINE SO-C5 is used in electronic devices, filler for epoxy molding compound, fillers for printed circuit boards. It is usesd as resin filling materials engineering plastics, filler for paint, filler for precise plastic molding. It is used in ceramics molding products and in anti-blocking materials.

Köstrosol® 1540 is an opalescent aqueous dispersion of amorphous silicon dioxide nanoparticles. This middle-size colloidal silica has a negatively charged surface (anionic) which is stabilized by Alkaline (Na+). Köstrosol® 1540 is a pure colloidal silica without any organic additives.

HALTEX® 302 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

ADMAFINE SO-C1 is used in electronic devices, filler for epoxy molding compound, fillers for printed circuit boards. It is usesd as resin filling materials engineering plastics, filler for paint, filler for precise plastic molding. It is used in ceramics molding products and in anti-blocking materials.

Alteo LVSH1 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut, viscosity optimized. It is available from from 25 to 4 microns.

Alteo LVSH2 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut, viscosity optimized. It is available from from 25 to 4 microns.

Alteo LVSH3 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut, viscosity optimized. It is available from from 25 to 4 microns.

Alteo SH80 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut. It is available from from 25 to 4 microns.

Ziegler & Co. Naturprodukte MicaCelia is due to its high lamellarity and purity a very special functional filler. The finely tuned process of selection, grinding and classification guarantees a high aspect ratio and highest purity. As a natural silica, MicaCelia is chemically inert, resistent to most acids and oxidation, unsoluble in water and has a high temperature resistance. MicaCelia as a very pure muscovite mica exhibiting excellent electrical insulation properties. MicaCelia acts as a functional filler in anticorosion paints and in wall coatings and textured finishes, both for crack control and gloss control. Its lamellar structure allows to improve application of the coatings and their adhesion.