Products in Other Electrical & Electronics Applications: Chemical Re...

Aronkasei AR-770 is styrene type elastomer AR.

TİSESTER® F 15D03 R01 is a PBT, 15% Glass Fiber Reinforced, Natural

BESTDUR® PXG6 is Polyethylene Terephthalate (PET) resins with good chemical resistance, good surface finish and low moisture absorption. BESTDUR can contain different reinforcements, modifiers and colors as well as V-0 flame retardant grades. BESTDUR® PH /01 is a natural PET.

EP GC 308 SY is a woven glass cloth epoxy (epoxide) resin.

Ceramerplus 20 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

Duresco NU 505 L is a Mineral filled epoxy molding compound with high temperature resistance and very good dimensional stability. Low and isotropic thermal expansion.

UV 292,Horsorb 292 is a hindered amine light stabilizer. It is particularly recommended for using in coatings.

E-SPHERES® SL350 are Coarse Grade White Hollow Ceramic Microspheres.

EP GC 203 is a woven glass cloth epoxy (epoxide) resin.

Aronkasei AR-731 is styrene type elastomer AR.

TPE Solutions TPV 160A is a thermoplastic Elastomer (TPE), that is based on PP/EPDM. It is designed to replace thermoset elastomers, such as EPDM or polychloroprene, and traditional thermoplastic TPVs/TPEs. TPV – 160A provides the performance of vulcanizated rubber with the advantage of low-cost thermoplastic processing. Excellent oil and chemical resistance with a maximum service temperature of 275°F. It is ozone, UV and water resistant as well. This grade is also considered polyolefin.

UV 944,Horsorb 944 is a polymeric light stabilizer, mainly applied in polyolefin plastic, such as PP and PE, in olefin copolymer, such as EVA and the combination of propylene and rubber. It is also used in polyphenylene oxide compound(PPE), polyacetals and polyamides, polyurethanes, PVC and PVC compound.

PALDUR® R 15 GF20 FR 0 is a Injection Molding. is a Flame retardant. it is General Chemical Resistance.

SPHERIGLASS® is a delivering Technical and Economic Advantages

PEEKshrink® is a linear, semi–crystalline aromatic polymer, is considered one of the highest performing thermoplastic materials; it can withstand extreme temperatures, high pressure and caustic fluids. Now, Zeus has taken PEEK to an entirely new level of performance with PEEKshrink™. PEEKshrink™ provides a shrink-to-fit layer of protection for sensitive components and critical connections. PEEKshrink™ is an ideally suited product for challenging environments such as oil and gas exploration where abrasion, intense pressure, chemicals, water, or dielectric interference pose a threat to wires and electrical components. PEEKshrink™ is an obvious and optimal splicing aid for PEEK insulated wire. PEEKshrink™ is an alternative to traditional fluoropolymer protective coatings with its very wide working temperature range.

PA6 is also known as Nylon 6 or polycaprolactam. It is a semicrystalline polyamide with 20% glass fiber.

PA66 is a semi crystalline material with one of the highest melting points.

PALDUR® R 15 GF20 is a Injection Molding, it is General Chemical Resistance.

E-SPHERES® ES150 are General Purpose Fine Grade Standard Hollow Ceramic Microspheres.

The virgin base resins of Polyamide 6 have excellent technical properties, a very low specific weight, chemical resistance to solvents (oils, greases and fuels), a very low moisture absorption. The remarkable ease of processing and the high physical-mechanical characteristics allow it to be used in various fields of application, in the automobile sector, in the textile and electrical industry, in the household appliances sector, in mechanics, in furnishings, etc. The excellent recyclability characteristics of Relon B help to preserve natural sources.

UV 622,Horsorb 622 widely is widely used in polyethylene, polypropylene, polystyrene, olefin copolymer and polyester, soft PVC, polyurethane, metaformaldehyde and polyamide.

Sunvin 21 is a benzotriazole type UV absorber. Characterized by its strong, broad range UV absorption property, UV-P brings an excellent photostability to polymers against UV light exposure in many ways i.e. retarding color yellowing , preventing embrittlement, maintaining of mechanical properties etc. UV-P is particularly effective in styrenic polymers, PVC, unsaturated polyesters, polyurethanes, acrylic polymers and polycarbonates.

Unfilled Rexolite® 1422 is chemically resistant, light weight, resists water absorption, and has negligible outgassing. Rexolite® is a thermoset, rigid, translucent plastic produced by cross linking and Rexolite is specifically geared for the microwave industry. The main feature of Rexolite is its stable electrical properties into the GHz frequency range. It is also optically clear (very similar to Acrylic), dimensionally stable, and has excellent sound transmission characteristics. Because of these features, Rexolite® is often used for high-frequency circuit substrates, microwave components, and lenses for acoustic, optical and radio-frequency applications. Rexolite has a Dielectric constant of 2.53 (up to 500 GHz) and exhibits an extremely low dissipation factor.

Aronkasei AR-791 is styrene type elastomer AR.

BESTDUR® PXG7 is Polyethylene Terephthalate (PET) resins with good chemical resistance, good surface finish and low moisture absorption. BESTDUR can contain different reinforcements, modifiers and colors as well as V-0 flame retardant grades. BESTDUR® PH /01 is a natural PET.

Ceramer 60 LF is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

The virgin base resins of Polyamide 6 have excellent technical properties, a very low specific weight, chemical resistance to solvents (oils, greases and fuels), a very low moisture absorption. The remarkable ease of processing and the high physical-mechanical characteristics allow it to be used in various fields of application, in the automobile sector, in the textile and electrical industry, in the household appliances sector, in mechanics, in furnishings, etc. The excellent recyclability characteristics of Relon B help to preserve natural sources.

Aronkasei AR-710 is styrene type elastomer AR.

POLYKING® PET Thermoplastic polyester is with very high mechanical property, heat resistance, good electrical properties, excellent chemical resistance and oil resistance. The molding part is dimensional stable and excellent surface appearance etc. It is widely used in electrical and electronic, mechanical and automotive fields.

By mixing several polymers together, JSR has lined up polymeric materials that display new characteristics. Products that have various functions, such as superior heat resistance and chemical resistance are available at JSR.

EP GC 201 black is a glass cloth epoxy (epoxide) resin.

INOFLON® GN7001 has high dielectric strength with good dimensional stability.

A208 is a Ground ATH is used in BMC, Carpet Backing, Rubber.

TİSESTER F 30D05 R01 is a PBT, 30% Glass Bead Reinforced, Natural.

DBNPG is a thermosetting polyester resins. It can be formulated over a wide range of compositions to provide a broader selection of resin properties than those available with anhydride flame retardant. Resins formulated with it have high chemical and flame resistance minimal thermal discoloration and excellent light stability The high bromine content of it and its ready reaction into polyurethanes make it suitable for use in rigid polyurethane foams, UPE,PU rigid foams.

Ketoprix™ EKT63 are thermoplastic aliphatic polyketones containing a 1,4-diketone backbone structure. They are produced from ethylene, propylene and CO with perfectly alternating olefin and CO monomers in the backbone.