Products in Other Electrical & Electronics Applications: Consumer A...

Vatan Plastik San. Tic. AS ANTIBLOCK MB 1001 PP concentrate usage enables air to flow around the film layers easily. It prevents the layer from sticking to each other. It helps films to be ordered in high speed.

Nilit NILAMID® B3 HHR GF30 is a Polyamide 6 (Nylon 6) compound, 30% glass fiber reinforced, heat and hydrolisis stabilized.This compound is intended for injection molding.NILAMID® B3 HHR GF30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

TPE Solutions TPV 160A is a thermoplastic Elastomer (TPE), that is based on PP/EPDM. It is designed to replace thermoset elastomers, such as EPDM or polychloroprene, and traditional thermoplastic TPVs/TPEs. TPV – 160A provides the performance of vulcanizated rubber with the advantage of low-cost thermoplastic processing. Excellent oil and chemical resistance with a maximum service temperature of 275°F. It is ozone, UV and water resistant as well. This grade is also considered polyolefin.

Nilit NILAMID® A3 GFB1020 is a Polyamide 66 (Nylon 66) compound, 10% glass fiber and 20% glass bead reinforced.This compound is intended for injection molding.NILAMID® A3 GFB1020 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® B3 HH K30 is a Polyamide 6 (Nylon 6) compound, 30% mineral filled, high heat stabilized.This compound is intended for injection molding.NILAMID® B3 HH K30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® C3 GF30 is a Polyamide 66/6 (Nylon 66/6) compound, 30% glass fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® C3 GF30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® B3 W M30 is a Polyamide 6 (Nylon 6) compound, 30% mineral filled, heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® B3 W M30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® A3 H GF15 TP07S is a Polyamide 66 (Nylon 66) compound, 15% glass fiber reinforced, low wear and friction, heat stabilized.This compound is intended for injection molding.NILAMID® A3 H GF15 TP07S is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit NILAMID® B2 HH GF60 is a Polyamide 6 (Nylon 6) compound, 60% glass fiber reinforced, high heat stabilized.This high stiffness and glossy finish compound is intended for injection molding.NILAMID® B2 HH GF60 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® B3 HH GB50 is a Polyamide 6 (Nylon 6) compound, 50% glass bead reinforced, high heat stabilized.This compound is intended for injection molding.NILAMID® B3 HH GB50 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® A3 GF30 TF15 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, low wear and friction with 15% PTFE.This compound is intended for injection molding.NILAMID® A3 GF30 TF15 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit NILAMID® A3 HH GF30 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, high heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® A3 HH GF30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

TPE Solutions TPV 155A is a thermoplastic Elastomer (TPE), that is based on PP/EPDM. It is designed to replace thermoset elastomers, such as EPDM or polychloroprene, and traditional thermoplastic TPVs/TPEs. TPV – 160A provides the performance of vulcanizated rubber with the advantage of low-cost thermoplastic processing. Excellent oil and chemical resistance with a maximum service temperature of 275°F. It is ozone, UV and water resistant as well. This grade is also considered polyolefin.

Nilit NILAMID® B3 N is an unfilled nucleated easy flow Polyamide 6 (Nylon 6) compound.This compound is intended for injection molding.NILAMID® B3 N is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Vatan Plastik San. Tic. AS SLIP MB 071 PE is used as internal and external slider in polyolefin. It ensures film surfaces to slide on each other and facilitates the opening of the layers. It provides operation opportunity in much lower temperatures with much higher efficiency thanks to its internal slider characteristics.

Nilit NILAMID® A3 W GF55 is a Polyamide 66 (Nylon 66) compound, 55% glass fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® A3 W GF55 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® B3 GF30 TM2 is a Polyamide 6 (Nylon 6) compound, 30% glass fiber reinforced, low wear and friction with molybdenum disulphide.This compound is intended for injection molding.NILAMID® B3 GF30 TM2 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit NILAMID® B3 GF50 is a Polyamide 6 (Nylon 6) compound, 50% glass fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® B3 GF50 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Vatan Plastik San. Tic. AS ANTISTATIC MB 071 PP produced while carrying out production in polyoefins, static electric is gathered on the plastic product. Therefore, product gather excessive amount of dust. Such products used in automatic packaging machinery causes damage because of static electricity. Anti-static concentrated usage prevents the occurrence of static electric on the plastic product.

Nilit NILAMID® A3 GF30 TF20 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, low wear and friction with 20% PTFE, UL listed HB.This compound is intended for injection molding.NILAMID® A3 GF30 TF20 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit NILAMID® A3 TM2 is an unfilled Polyamide 66 (Nylon 66) compound, low wear and friction with molybdenum disulphide.This compound is intended for injection molding.NILAMID® A3 TM2 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit NILAMID® A3 GF50 is a Polyamide 66 (Nylon 66) compound, 50% glass fiber reinforced, heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® A3 GF50 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

TPE Solutions TPV 140A thermoplastic vulcanizate is a fully crosslinked, EPDM/PP compound. It is designed to replace thermoset elastomers, such as EPDM or polychloroprene, and traditional thermoplastic TPVs. TPV – 140A provides the performance of vulcanizated rubber with the advantage of low-cost thermoplastic processing. Excellent oil and chemical resistance with a maximum service temperature of 275°F.

Nilit NILAMID® A3 W GF30 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® A3 W GF30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® A3 AL40 is a Polyamide 66 (Nylon 66) compound, 40% aluminum filled.This compound is intended for injection molding.NILAMID® A3 AL40 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Astra Polymers Black-MB/P-Type is used under automotive, consumers, packaging, electrical, appliances, construction, agriculture.

Vatan Plastik San. Tic. AS SLIP MB 071 PP is used as internal and external slider in polyolefin. It ensures film surfaces to slide on each other and facilitates the opening of the layers. It provides operation opportunity in much lower temperatures with much higher efficiency thanks to its internal slider characteristics.

Nilit NILAMID® B3 GF30 is a Polyamide 6 (Nylon 6) compound, 30% glass fiber reinforced, heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® B3 GF30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

TPE Solutions TPV 170A Precolored Gray is a thermoplastic Elastomer (TPE), that is based on PP/EPDM. It is designed to replace thermoset elastomers, such as EPDM or polychloroprene, and traditional thermoplastic TPVs/TPEs. TPV – 170A Precolored Gray provides the performance of vulcanizated rubber with the advantage of low-cost thermoplastic processing. Excellent oil and chemical resistance with a maximum service temperature of 275°F. It is ozone, UV and water resistant as well. This grade is also considered polyolefin.

Vatan Plastik San. Tic. AS ANTISTATIC MB 071 PE produced while carrying out production in polyoefins, static electric is gathered on the plastic product. Therefore, product gather excessive amount of dust. Such products used in automatic packaging machinery causes damage because of static electricity. Anti-static concentrated usage prevents the occurrence of static electric on the plastic product.

Nilit NILAMID® A3 GF30 TM2 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, low wear and friction with molybdenum disulphide.This compound is intended for injection molding.NILAMID® A3 GF30 TM2 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Astra Polymers Black-MB is used under automotive, consumers, packaging, electrical, appliances, construction, agriculture.

Nilit NILAMID® B3 HH KGF2515 is a Polyamide 6 (Nylon 6) compound, 15% glass fiber reinforced, 25% mineral filled and high heat stabilized.This compound is intended for injection molding.NILAMID® B3 HH KGF2515 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® A3 WR GF30 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, peroxides stabilized, UL listed HB.It is WRAS certified.This compound is intended for injection molding.NILAMID® A3 WR GF30 is primarily designed for the Industrial & Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit NILAMID® B3 TM2 is an unfilled Polyamide 6 (Nylon 6) compound, low wear and friction with molybdenum disulphide.This compound is intended for injection molding.NILAMID® B3 TM2 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit NILAMID® B3 W GF30 is a Polyamide 6 (Nylon 6) compound, 30% glass fiber reinforced, heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® B3 W GF30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.