Products in Electrical & Electronics: Stabilizer

MultiTech MultiFunctional T is a recycling additive for polyolefines. It is used for upcycling Polypropylene from car battery cases: Repair of damage in the polymer chains by a novel chemical system. High-quality recyclates for demanding long-term applications Prolonged retention of mechanical properties during long-term heat aging. Neutralization of acidic contaminations. One-Pack solution stabilizes the recycling process. MultiTech MultiFunctional T recycling additives improve the polyolefin recycling processes and help recyclers to produce higher-value polyolefine recyclates for long-term applications. For the first time, the new repairing technology allows repairing damages from prior use.

MultiTech MultiFunctional U is our recycling additive for polyolefins MultiTech MultiFunctional U recycling additives improve the polyolefin recycling processes and help recyclers to produce higher value polyolefine recyclates for long term applications. For the first time the new repairing technology allows to repair damages from prior use. MultiTech MultiFunctional U for Upcycling of post-industrial and post-consumer polypropylene waste streams: Repair of damage in the polymer chains by novel chemical system. High quality recyclates for demanding long term applications Prolonged retention of mechanical properties during long term heat aging. One-Pack solution stabilizes the recycling process

AEROXIDE® Alu C is a fine-particulate, pure aluminum oxide (Al₂O₃) with high specific surface area and marked aggregate and agglomerate structure. Because of it high purity and low water content, the product can be used well as an additive to anorganic materials, for heat insulation, and also as a catalyst substrate. The positive surface charge can be used to control the electrostatic charge.

TEGOSIL® Heatban 200 is a heat stabilizer for cured silicone elastomers, especially high-consistency rubber (HCR). Like TEGOSIL® Heatban 110, this product offers protection against thermal degradation up to 300°C. It is compatible with various peroxide- and platinum-cured rubber materials commonly used in industrial and consumer applications. Its pasty viscosity simplifies incorporation into HCR formulations.

Z-LITE® 62 is an efficient hindered amine light stabilizer, holds significance in PVC and PVB applications. Its appearance can vary between white or yellow powder or granules. With attributes like low volatility and a low melting range, it excels in agricultural films, wire, and cable applications. It's also compatible with pigment systems and those using carbon black.

Z-LITE® 3346 is a Hindered Amine Light Stabilizer (HALS) designed for enhancing the durability of plastics and elastomers. This product functions as a light stabilizer, suitable for various polymers and resins including acrylonitrile butadiene styrene (ABS), polyamides, polyethylenes (PE), polypropylenes (PP), polyurethanes (PU), polyvinyl chloride (PVC), polystyrenes (PS), and thermoplastic polyurethane (TPU). Z-LITE® 3346 is particularly valuable in applications such as cables, fibers, films, pipes, textile applications, and tubing.

MOCOM Compounds ALCOLOR® Function PC LS FC WT5069-16 is a white, similar to RAL 9003, polycarbonate colorant that is used in the food processing industry, household goods, domestic appliances, packaging, automotive, machinery, electrical and electronic, furniture, building and construction, and sport and leisure. It has a dosage of 5.0% extrusion and 5.0% injection molding, depending on wall thickness and required color intensity, and depends on application and operational area. It has a light fastness colorant of blue woolscale 8, a base polymer of polycarbonate, a filler/additive system of laser sensitive additive, and is laser etchable (dark etching), food contact, high additive content, free from cadmium, lead and diarylide pigments, and has high dispersibility and is dust-free.

BRUGGOLEN® TP-H2062 is a halogen and metal-free heat stabilizer for polyamides in the form of polymeric granules. In E&E applications, it provides:Improved retention of mechanical performance under heat compared to standard phosphite/phenolic-based stabilizersTensile strength retention >50% for 2500h at 150°CMaintains comparative tracking index (CTI) up to 600VAllows E&E applications at elevated temperaturesHalogen and metal-free heat stabilizer in granular product form

BRUGGOLEN® H164 is a synergistic mixture of sterically hindered phenolic antioxidants and phosphonates in powder form. Our phenol-based stabilizer BRUGGOLEN® H164 is reaching a long-term protection of polyamides against heat aging for technical applications such as:Non-discoloringExcellent in glass fiber reinforced or mineral-filled polyamides

OMNISTAB® AN 168 is a hydrolytically stable phosphite processing stabilizer. Also acts as an antioxidant.

OMNISTAB® LS 622 is an oligomeric hindered amine light stabilizer (HALS). Furthermore, it is effective as antioxidant and contributes significantly to the long-term heat stability of polyolefins and tackifier resins.

Andisil® TL 10 products are high activity liquid catalysts used in the condensation cure of silicones, and the synthesis of polyurethanes & esters.

BRUGGOLEN® TP-H2217 is a halogen and metal-free heat stabilizer for aliphatic polyamides in a polymeric granular product form It is suitable for polyamides in E&E applications. It has exceptional features: Improved retention of mechanical performance under heat compared to standard phosphite/phenolic based stabilizers Tensile strength retention of at least 50% for 2500h at 150°C Maintains comparative tracking index (CTI) up to 600V Allows E&E applications at elevated temperatures TP-H2217 has no influence on flame retardancy: UL94 V-0

OMNISTAB® LS 770 is a low molecular weight hindered amine light stabilizer (HALS) for applications demanding particularly high light stability.

GrapheneBlack™ 3X is NanoXplore's slightly larger pristine few-layer-graphene designed for multi-functional performance improvements in a wide range of markets and technologies. GrapheneBlack can be used in thermoplastics, thermosets, concrete, coatings, lubricants, and rubbers and enables manufacturers to cost-effectively improve long term product performance.

RIANOX® 1035 is a sulfur containing primary (phenolic) antioxidant and heat stabilizer used for the process stabilization of polyethylene wire and cable resins.

OMNISTAB® LS B 783 is a synergistic mixture of Omnistab LS 944 and Omnistab LS 622. It is a versatile light stabilizer with good extraction resistance, low gas fading and low pigment interaction.

Andisil® TL 28 products are high activity liquid catalysts used in the condensation cure of silicones, and the synthesis of polyurethanes & esters.

GrapheneBlack™ 0X is NanoXplore's slightly smaller pristine few-layer-graphene designed for multi-functional performance improvements in a wide range of markets and technologies. GrapheneBlack can be used in thermoplastics, thermosets, concrete, coatings, lubricants, and rubbers and enables manufacturers to cost-effectively improve long term product performance.

BRUGGOLEN® H3386 is a mixture of copper-complex-based antioxidants and synergists. It is used for the retention of natural polyamide color after conditioning. This product is particularly suitable for the stabilization of polyamides against thermal aging, chemical attack, or aggressive weathering conditions. Powerful long-term stabilization/ natural colors Excellent UV stabilization Very effective dispersion

Taiwan Colors & Chemicals Dibasic Lead Phosphite (D.L.P.) has excellent lubricity, heat stability, weather ability, good electrical insulation and no spewing of fatty acid. It has weak water absorption.

SAK- CZL by Sun Ace is a one-pack calcium-zinc heat stabilizer. SAK- CZL is based on a combination of calcium and zinc soaps, together with organic and inorganic co-stabilizers to provide combined high heat stability and lubrication to suit a broad range of processing conditions. It has synergistic effects leading to an increased efficiency in comparison with the single components at satisfactory dosage levels. Used in flexible PVC cable applications.

Mittal Pigments (Mittal Group) Dibasic Lead Stearate (DBLS) is produced and supplied as a fine off-white powder, with a lead (Pb) content of 51.5%.

UNISTAB BC-600 has excellent initial color and color retention.

Plaox DCDPA is a combination of high amine antioxidant activity, good color and low volatility makes it an ideal antioxidant and heat stabilizer for rubber and plastics. Effective in Polyisoprene, Neoprene, Nitrile, HNBR and acrylic rubbers.

Pau Tai Industrial Magnesium stearate has excellent lubricity and good heat stability.

Mittal Pigments (Mittal Group) Calcium stearate is a non-toxic stabilizer and lubricant with the molecular formula Ca(C18H35O2)2. It is an insoluble calcium salt of stearic acid. Commercially it is sold as a 50% dispersion in water or as a spray dried powder. As a food additive it is known by the E number E572.

Shandong JinChangshu New Mstar Technology DL-008A is a non-toxic and environmentally friendly, high heat resistance, high insulation with good weather resistance. It also has vulcanization resistance that ordinary stabilizers can't reach, and has the performance of suppressing patina. It complies with ROHS standard production and national environmental protection requirements, and is an ideal substitute product for the national lead ban.

GREENSTAB® 5225(PF) is used by PVC Pipe Manufacturers,PVC Accessories Manufacturers,PVC Cable Manufacturers.

Johoku Chemical JP-3CP is a antioxidant, heat resistance stabilizer, non-discoloring stabilizer for plastics, lubricants.

Sunlube BA-10 is in powder form and chemically known as Barium Stearate.

Rostabil DDPP is an alkyl-aryl phosphite in the form of a clear, homogeneous liquid with a characteristic, delicate fragrance. It is used as a process stabilizer in plastics processing. It prevents degradation of polymer materials providing thermal and process protection. The use of Rostabil DDPP stabilizer eliminates the effect of yellowing of materials. It significantly enhances the color stability of pigment-containing materials and provides transparency to non-pigmented products.

Cel-Span® S 100 is a compounded additive for color stabilization and dispersion. A unique proprietary compounding technique makes it possible to pelletize the entire active stabilizer and dispersant in the formulation without adding additional heat history. Cel-Span® S 100 should be utilized at 0.25% to 1% consistently during the color concentration manufacturing processes for stabilization and dispersion. Cel-Span® S 100 also lessens degradation of pigments and enhances the brightness of color concentrates. The pigment is initially dispersed by dispersing agents in order to prevent the formation of uncontrolled flocculates; a process of contact and adhesion whereby the particles of dispersion form larger-size clusters. Stability of dispersion is a result of interplay of the heat (kinetic) energy of particles, attractive inter-particle forces, and repulsive forces; this also helps to limit short-range Van der Waals forces.

BIONOX® DSTDP is a dialkyl ester of thiodipropionic acid that is used as a heat stabilizer in combination with a sterically hindered phenolic antioxidant.