Products in Electrical & Electronics: Heat Stabilizer

MultiTech MultiFunctional T is a recycling additive for polyolefines. It is used for upcycling Polypropylene from car battery cases: Repair of damage in the polymer chains by a novel chemical system. High-quality recyclates for demanding long-term applications Prolonged retention of mechanical properties during long-term heat aging. Neutralization of acidic contaminations. One-Pack solution stabilizes the recycling process. MultiTech MultiFunctional T recycling additives improve the polyolefin recycling processes and help recyclers to produce higher-value polyolefine recyclates for long-term applications. For the first time, the new repairing technology allows repairing damages from prior use.

MultiTech MultiFunctional U is our recycling additive for polyolefins MultiTech MultiFunctional U recycling additives improve the polyolefin recycling processes and help recyclers to produce higher value polyolefine recyclates for long term applications. For the first time the new repairing technology allows to repair damages from prior use. MultiTech MultiFunctional U for Upcycling of post-industrial and post-consumer polypropylene waste streams: Repair of damage in the polymer chains by novel chemical system. High quality recyclates for demanding long term applications Prolonged retention of mechanical properties during long term heat aging. One-Pack solution stabilizes the recycling process

AEROXIDE® Alu C is a fine-particulate, pure aluminum oxide (Al₂O₃) with high specific surface area and marked aggregate and agglomerate structure. Because of it high purity and low water content, the product can be used well as an additive to anorganic materials, for heat insulation, and also as a catalyst substrate. The positive surface charge can be used to control the electrostatic charge.

TEGOSIL® Heatban 200 is a heat stabilizer for cured silicone elastomers, especially high-consistency rubber (HCR). Like TEGOSIL® Heatban 110, this product offers protection against thermal degradation up to 300°C. It is compatible with various peroxide- and platinum-cured rubber materials commonly used in industrial and consumer applications. Its pasty viscosity simplifies incorporation into HCR formulations.

BRUGGOLEN® TP-H2062 is a halogen and metal-free heat stabilizer for polyamides in the form of polymeric granules. In E&E applications, it provides:Improved retention of mechanical performance under heat compared to standard phosphite/phenolic-based stabilizersTensile strength retention >50% for 2500h at 150°CMaintains comparative tracking index (CTI) up to 600VAllows E&E applications at elevated temperaturesHalogen and metal-free heat stabilizer in granular product form

BRUGGOLEN® H164 is a synergistic mixture of sterically hindered phenolic antioxidants and phosphonates in powder form. Our phenol-based stabilizer BRUGGOLEN® H164 is reaching a long-term protection of polyamides against heat aging for technical applications such as:Non-discoloringExcellent in glass fiber reinforced or mineral-filled polyamides

Andisil® TL 10 products are high activity liquid catalysts used in the condensation cure of silicones, and the synthesis of polyurethanes & esters.

BRUGGOLEN® TP-H2217 is a halogen and metal-free heat stabilizer for aliphatic polyamides in a polymeric granular product form It is suitable for polyamides in E&E applications. It has exceptional features: Improved retention of mechanical performance under heat compared to standard phosphite/phenolic based stabilizers Tensile strength retention of at least 50% for 2500h at 150°C Maintains comparative tracking index (CTI) up to 600V Allows E&E applications at elevated temperatures TP-H2217 has no influence on flame retardancy: UL94 V-0

BRUGGOLEN® H3336 is a mixture of copper complex-based antioxidants and synergists in powder form. BRUGGOLEN® H3336 provides highly efficient heat stabilization of polyamides up to 180°C, which leads to effective processing stabilization against polymer degradation. It gives a characteristic bluish discoloration after conditioning. Features:Cost-effectiveExcellent dispersionHigh extraction resistance, no plate-outSuited for E&E applicationsCharacteristic:Bluish discoloration after conditioning

RIANOX® 1035 is a sulfur containing primary (phenolic) antioxidant and heat stabilizer used for the process stabilization of polyethylene wire and cable resins.

Andisil® TL 28 products are high activity liquid catalysts used in the condensation cure of silicones, and the synthesis of polyurethanes & esters.

BRUGGOLEN® H3386 is a mixture of copper-complex-based antioxidants and synergists. It is used for the retention of natural polyamide color after conditioning. This product is particularly suitable for the stabilization of polyamides against thermal aging, chemical attack, or aggressive weathering conditions. Powerful long-term stabilization/ natural colors Excellent UV stabilization Very effective dispersion

SAK- CZL by Sun Ace is a one-pack calcium-zinc heat stabilizer. SAK- CZL is based on a combination of calcium and zinc soaps, together with organic and inorganic co-stabilizers to provide combined high heat stability and lubrication to suit a broad range of processing conditions. It has synergistic effects leading to an increased efficiency in comparison with the single components at satisfactory dosage levels. Used in flexible PVC cable applications.

Mittal Pigments (Mittal Group) Dibasic Lead Stearate (DBLS) is produced and supplied as a fine off-white powder, with a lead (Pb) content of 51.5%.

Plaox DCDPA is a combination of high amine antioxidant activity, good color and low volatility makes it an ideal antioxidant and heat stabilizer for rubber and plastics. Effective in Polyisoprene, Neoprene, Nitrile, HNBR and acrylic rubbers.

Pau Tai Industrial Magnesium stearate has excellent lubricity and good heat stability.

Mittal Pigments (Mittal Group) Calcium stearate is a non-toxic stabilizer and lubricant with the molecular formula Ca(C18H35O2)2. It is an insoluble calcium salt of stearic acid. Commercially it is sold as a 50% dispersion in water or as a spray dried powder. As a food additive it is known by the E number E572.

Johoku Chemical JP-3CP is a antioxidant, heat resistance stabilizer, non-discoloring stabilizer for plastics, lubricants.

Sunlube BA-10 is in powder form and chemically known as Barium Stearate.

OKABEST® additives give the chance into new applications for your thermoplastics. Newly developed OKABEST® additives are already stabilizing numerous parts, staying functional at very high temperatures or resisting hot motor oil. OKABEST® PAT 216 is an endurance stabilization for GF-PP.

Rostabil DDPP is an alkyl-aryl phosphite in the form of a clear, homogeneous liquid with a characteristic, delicate fragrance. It is used as a process stabilizer in plastics processing. It prevents degradation of polymer materials providing thermal and process protection. The use of Rostabil DDPP stabilizer eliminates the effect of yellowing of materials. It significantly enhances the color stability of pigment-containing materials and provides transparency to non-pigmented products.

BIONOX® DSTDP is a dialkyl ester of thiodipropionic acid that is used as a heat stabilizer in combination with a sterically hindered phenolic antioxidant.

Pau Tai Industrial Lead stearate has excellent lubricant and good heat Stability.

Reagens SLX/781 is used in calendering of semi-rigid and plasticized PVC. It imparts excellent initial color, good transparency and a good long term heat stability with most types of PVC resins, showing no plate-out tendency. The addition of an epoxy compound, such as Reaflex EP/6 (about 2-4 phr), improves the long term heat stability and the weathering performance.

Antioxidant 697 is a sterically hindered phenolic antioxidant and metal deactivator. Antioxidant 697 protects polymers against oxidative degradation and metal catalyzed degradation during processing and in end‐use applications. This antioxidant also provides long term thermal stabilization properties. This phenolic antioxidant is an excellent, non‐discoloring, non‐staining antioxidant and thermal stabilizer with outstanding metal deactivation properties. Typical end use applications include wire and cable insulation, film and sheet manufacture as well as automotive parts. Antioxidant 697 will stabilize polypropylene, polyethylene, polystyrene, polyester, EPDM, EVA and ABS. Low volatility ,Strong synergistic effect with phosphites, other phenols and thioesters, Non‐staining and non‐discoloring,FDA approved for adhesives and polymers.

Johoku Chemical JP-308E is a antioxidant, heat resistance stabilizer, non-discoloring stabilizer for plastics, lubricants.

Pau Tai Industrial Cadmium stearate has excellent heat and light stability and clarity.

OKABEST® additives give the chance into new applications for your thermoplastics. Newly developed OKABEST® additives are already stabilizing numerous parts, staying functional at very high temperatures or resisting hot motor oil. OKABEST® CLX is used as heat stabilization for PA6.

S V Plastochem Di Basic Lead Stearate is used in excellent heat stabilizer for opaque rigid applications.

Johoku Chemical JPE-308E is a antioxidant, heat resistance stabilizer, non-discoloring stabilizer for plastics, lubricants.

Pau Tai Industrial Tribasic lead sulfate has excellent heat stability and electrical insulation. It is also used in white opaque products.

BNX DSTDP (693-36-7)is a thioether-type antioxidant that functions by scavenging peroxides formed during the thermal oxidative degradation of plastics and other organic materials. Combinations of this product with hindered phenolic antioxidants (e.g. BNX 1010) provide outstanding thermal stability in polyolefins, styrenic polymers, and engineering plastics. BNX DSTDP is non-discoloring, has good compatibility with polyolefins, styrenic polymers, and adhesives, and has low odor relative to other sulfur-based antioxidants.

Johoku Chemical JP-333E is a antioxidant, heat resistance stabilizer, non-discoloring stabilizer for plastics, lubricants.