Products in Electrical & Electronics: Food Contact Acceptable

V70SW is a peroxide-cured FDA-compliant, fluoroelastomer (FKM) material developed to withstand steam-in-place (SIP) and clean-in-place (CIP) procedures within pipe work and vessels.Unlike other FDA-compliant fluoroelastomers, V70SW provides superior steam resistance, ideal for use in Stage II Sterilization processes which require exposure to steam up to 200°C (392°F).V70SW can be used for all types of applications requiring FDA and USP Class VI compliance. It is suitable for use in all product contact applications including dry, aqueous and fatty media.Key Attributes Excellent steam resistance up to 200°C Superior resistance to a wide range of solvents & chemicals Superior mechanical properties FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) USP Class VI compliant 3-A Standard 18-03 Class 1 compliant Free from Animal Derived Ingredients Typical ApplicationsRecommended for use hygienic sealing in pharmaceutical, bio-analytical and food processing applications. O-rings Gaskets Hygienic/sanitary couplings & pipe connectors Ball segment valve seals (inflatable seals)

Disheng Technology Ultraviolet absorber UV-326 hardly absorbs visible light, and is especially suitable for colorless, transparent and light-colored products.

Henan Connect Rubber Chemical ZDMC (PZ) an be used as primary or secondary accelerator for NR, IR, SBR, NBR, IIR, and EPDM.

Ceramer 60 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

INOFLON® GN7003 has high dielectric strength with good dimensional stability.

Smiths Metal Centers Ultra-high Molecular Weight PE is a high-quality engineering plastic materials. It is polyethylene with Ultra-high molecular weight.

Oxy Vinyls 226 is a Polyvinyl Chloride Homopolymer which is white, free flowing powder.

Tovo Gomma EPDM 4660 Bianca is a rubber compound with the trade name White EPDM Sheet for food contact* which has an ethylene-propylene application.

ALTAFLUOR® 100 PTFE has the broadest temperature range of any fluoropolymer and can resist highly corrosive liquids and gasses even at elevated temperatures. The smooth surface finish, lowest coefficient of friction and lubricity make it ideal for bushing or bearing applications.

ANTIMICROBIAL MB 02SV 91A002 AM (SQ 3286) is used for Water Storage Tanks, ABS Components, Mobile Panels,Electronic Devices.

Promyde® BF540 is a high viscosity copolyamide without additives specially formulated for the production of monofilaments and blown films with a high transparency.

Blend Colors PP Black Compound/6 is a black masterbatches for key markets such as agricultural, packaging, electronics, textiles and nonwovens, wire & cable, automotive and construction. And our R&D team makes consistent and continuous efforts to give steady products and also invent new formulations as per customer needs.

Manifattura Cattaneo PVDF is a Non-toxic semi-crystalline thermoplastic with high chemical resistance. Suitable for contact with food.

Clearflex® CL B0 is a linear low density polyethylene, with antioxidants, characterized by a very low density (VLDPE).The resin has a high stretchability and a good cling effect.Main ApplicationClearflex CL B0 is recommended for applications in which soft touch and flexibility are required, for the improvement of impact resistance when used as additive in blend with other polyolefins formulated with or without mineral fillers. Clearflex CL B0 is also used as cling agent in stretch film.

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3025IR(H) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100°C ~ 135°C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3025IR(02) resin grade is used for electric and electronic applications, food contact materials and etc. Medium viscosity. Transparent colors only.

TPE-S, Shore A35, translucent, suitable for food contact

ADK STAB 2112 also called 1680is applied in polyolefins, ABS, PS and engineering plastics. It also contains features such as excellent hydrolytic, stability excellent and process stability.

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3022L1(01) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100 ? ~ 135 ?) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3022L1(01) resin grade is used for electric and electronic applications, headlamp lens, food contact materials and etc. Medium viscosity. Transparent colors only

avanNATUR TPU STAT (FC) are uses of TPU is causing a multitude of thermoplastics with completely different characteristics to be found under this denomination. Given this versatility and variety of TPUs in the market, avanzare has developed a wide variety of additives in various formats to respond to each of the requests shown by the market.

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound designed for contact with non-fatty foods.The monomers and additives used to produce this product are listed in the Union List of Authorized Substances of Regulation 10/2011/EC.

Kotex KV-20FD Polycarbonate is a food contact, high viscosity, mold release which is transparent.

A soft, black SEBS based thermoplastic elastomer (TPE) compound designed for contact with non-fatty foods.The monomers and additives used to produce this product are listed in the Union List of Authorized Substances of Regulation 10/2011/EC.

A soft, black SEBS based thermoplastic elastomer (TPE) compound designed for contact with non-fatty foods.The monomers and additives used to produce this product are listed in the Union List of Authorized Substances of Regulation 10/2011/EC.

Epoxidized soybean oil/ESBO can be used in most products of polyvinyl chloride, such as all kinds of food package materials, medical products, different kinds of films, sheet materials, tubing, sealing strip of refrigerator, artificial leather, plastic wallpaper, electrical wires and cables and other commodity plastic products .It also can be used as special

POLIMAXX®HI830 is a high impact grade of polystyrene resin for extrusion process with good impact resistance. It is recommended for food packaging, vacuum sheet, household products, and sanitary ware. It also meets the requirement of food contact regulation.

Ultra Purge™ C4000 product is recommended by major machine and colorant producers as the most cost-effective and efficient solution for cleaning plastic processing machines. Contaminants are safely ejected without harming the screw, barrel or hot runner. Expanding agents in most Ultra Purge™ product allow the material to clean even the hardest-to-reach areas inside your machines. Ultra Purge™ is effective for color changes, material changes and the removal of black specks. Ultra Purge™ works at the processing temperature of the production material.

INOFLON® GN7045 has high dielectric strength with good dimensional stability.

Oxy Vinyls 240 is a Polyvinyl Chloride Homopolymer which is white, free flowing powder.

TPE-S, Shore A31, translucent, food compliant according to EU 10/2011 and FDA

PBT-GF20, PBT, 20% glass fiber reinforced, approved for use in food contact

A soft, black SEBS based thermoplastic elastomer (TPE) compound designed for contact with non-fatty foods.The monomers and additives used to produce this product are listed in the Union List of Authorized Substances of Regulation 10/2011/EC.

PROFLEX P-UL is a transparent material for injection molding.

PPS-GF40, linear PPS, 40% glass fiber reinforced, approved for food applications according to EU and FDA guidelines.

POLIMAXX®GP150 is a general purpose grade of polystyrene resin for injection molding process with easy flow and good clarity. It is suitable for food packaging, electrical appliances (such as refrigerator food tray), household products, sanitary ware and etc. It also meets the requirement of food contact regulation.

Promyde® BF640 is a new experimental copolyamide without additives specially formulated for the production of cast and blown film.