Products in Stationery, Art & Office Supplies: Acrylics, Acrylates &...

METABLEN™ S 2001 is a silicone-acrylic rubber-type impact modifier with high impact strength in all temperatures and excellent weatherability. It can be used with ABS, PC, PLA, and other matrix resins in a variety of automotive, aerospace and electric and electronic applications. Features Can be used with recycled plastics Good weather stability Low temperature impact resistance *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2130 is a silicone-acrylic-based rubber impact modifier optimized for flame retardant polycarbonate (PC) resins. It adds colorability, heat-aging resistance and impact strength to PC and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S X-005 is a silicone-acrylic rubber-type impact modifier that provides flame retardance, hydrolysis resistance and impact strength. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesFlame retardantWeather stabilityHydrolysis resistanceImpact resistance even at low temperaturesLow friction*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2100 is a silicone-acrylic-based rubber impact modifier with good colorability and impact strength. It is used for polycarbonates (PC) and polycarbonate blends, polyvinyl chloride, engineering plastics and polyolefins in a variety of automotive, aerospace, consumer goods, and electric and electronic applications. METABLEN™ S-2100 provides ductility on facial impact tests, even after immersion of coating chemicals. The effect is maintained at higher molding temperatures. BenefitsEasy to processFlame retardancy for engineering plastics and polyolefins elastomersFeaturesGood colorabilityWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2200 is a silicone-acrylic-based rubber impact modifier with an epoxy-modified shell.Compatible with Polyethylene terephthalate (PET), polybutylene terephthalate (PBT), polyamide (PA) and alloy, it provides hydrolysis resistance, heat-aging resistance and impact strength for a wide range of automotive, aerospace and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

LIOPUR PFL 2392 is an aqueous, aliphatic modified polyurethane dispersion based on polyester that is solvent- and triethylamin-free and free of surfactants. After air-drying, film coatings based on LIOPUR PFL 2392 form transparent films that are tack-free and display a good surface resistance of approximately 50 sec. Pendulum hardness after König. It has applications in architectural coatings, wood coatings and furnishings, craft and hobby, metal coatings, automotive OEM coatings, and also in other consumer goods applications.

Screamin' SRX Fluorescent Paint is a premium, low odor, water-based fluorescent latex paint. Maximum lightfastness and film integrity are dependent upon the use of DayGlo FILTERAY® Type "W" (clear overcoat). DayGlo® Screamin' SRX paints appear to glow in the dark when exposed to black light.

PHOTOMER® 4775 is an amine acrylate of intermediate viscosity to be used as an amine synergist in UV curable inks and coatings;

Omnirad 127 D is a highly efficient Type I Photoinitiator that may be used to initiate the photo polymerization of unsaturated pre-polymers like acrylates – in combination with mono- or multifunctional monomers. Omnirad 127 D is especially suitable for all types of pigmented UV inks (offset, screen, flexo and inkjet) and clear coatings, particularly in thin coatings (such as overprint varnishes) but also in a variety of coating applications.

PHOTOMER® 4250 is a 100% active, multifunctional amine acrylate. This product is primarily used in place of free amines. PHOTOMER® 4250 offers an excellent way to increase system cure speeds, while minimizing amine migration and ink burn-out.

Omnirad 907 is a highly efficient photoinitiator which is used to initiate the photo polymerization of unsaturated prepolymers, e.g., acrylates, in combination with mono- or multifunctional vinyl monomers.

Omnirad BDK is a highly efficient, type I photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light. It can be used in combination with mono or multi-functional monomers as reactive diluents.

PHOTOMER® 5429 is a low viscosity tetra functional polyester acrylate oligomer. When exposed to UV/EB radiation, this product cures rapidly and has good adhesion particularly to metal substrates. PHOTOMER® 5429 is recommended for use in UV/EB clear and pigmented systems.

PHOTOMER® 4173 is a proprietary UV/EB curable acrylate oligomer of low functionality and low viscosity. Designed primarily for use in etch-resist inks for printed circuit board manufacture, it can be readily formulated into a UV curable screen ink which exhibits good scratch resistance and improved stripping characteristics.

PHOTOMER® 5310 is a di functional self matting oligomer used in UV/EB curable systems. It has been specially designed to formulate very low gloss UV varnishes. It exhibits of less yellowing and more hardness than PHOTOMER® 5010

Photomer® 4003 is a monofunctional aromatic acrylate of low viscosity, moderate odor, good cure speed and is classified as a skin irritant and sensitizer. Due to the monofunctional character of its backbone, it has been found useful as a flexibilizer and as an adhesion promoter. It is suggested for use in UV/EB curable flexo, screen and flexographic inks, clear coatings and lacquers.

Photomer® 4184 is a monofunctional urethane acrylate which can be used as a reactive diluent for radiation curable coatings, inks and adhesives. It is non-yellowing with a low odor and offers improved flexibility and adhesion to plastics. It exhibit of low shrinkage and high elongation and stress at break with a Tg of - 3°C.

Omnirad 73 is a highly efficient, low yellowing, Type I photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It can be used in combination with mono or multi functional monomers as reactive diluents.

Omnimer ACMO is a low viscosity, monofunctional UV reactive diluent for UV and EB radiation curable formulations. The product exhibits of excellent heat resistance and low odor (due to its low vapor pressure) .

PHOTOMER® 5006 is a low viscosity, amine synergist with medium amine content. A co-polymerizable tertiary amine PHOTOMER® 5006 is used as a highly efficient co-initiator. In combination with UV acrylates it accelerates the cure of UV systems.

PHOTOMER® 4771 is an amine modified diacrylate which exhibits moderate viscosity, low odor and excellent monomer/oligomer compatibility. This amine synergist will enhance the cure characteristics as well as adhesion properties when properly formulated with photosensitizing initiators such as benzophenone.

PHOTOMER® 5028 is a tri functional chlorinated polyester acrylate diluted in 40% Photomer® 4094 (GPTA). It has been designed for use in UV/EB curable formulations for substrates such as wood, paper, plastic and metal. The product can aid adhesion to difficult substrates such as plastics.

PHOTOMER® 5662 is a tetra functional oligomer used in UV/EB curable systems. The product exhibits a medium viscosity. It gives a high crosslinking density with a high reactivity.

Omnirad TPO-L is a highly efficient, liquid, Type I photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates and unsaturated polyesters containing styrene, after exposure to UV light. It can be used in combination with mono or multi-functional monomers as reactive diluents.

Omnirad 127 is a highly efficient Type I Photoinitiator that may be used to initiate the photo polymerization of unsaturated pre-polymers like acrylates – in combination with mono- or multifunctional monomers. Omnirad 127 is especially suitable for all types of pigmented UV inks (offset, screen, flexo and inkjet) and clear coatings, particularly in thin coatings (such as overprint varnishes) but also in a variety of coating applications.

PHOTOMER® 4780 is a is an amine acrylate of medium viscosity to be used as an amine synergist in UV curable inks and coatings.

Omnirad CPTX is a highly efficient Type II photoinitiator which, used in combination with tertiary amine synergists to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. Omnirad CPTX may also be used as a sensitiser and in particurlarly iodonium salt in cationic cure.

Aqueous, Aliphatic modified polyurethane dispersion based on a polyester, Solventfree and triethylaminfree, free of surfactants

PHOTOMER® 5010 is a di functional self matting oligomer used in UV/EB curable systems. It has been specially designed to formulate very low gloss UV varnishes.

Aqueous, Aliphatic modified polyurethane dispersion based on a polyester, Solventfree and triethylaminfree, free of surfactants

PHOTOMER® 4068 is a low viscosity, amine synergist. In combination with UV acrylates it accelerates the cure of UV systems.

BONDEX® ACR is based on Acrylic Terpolymer Emulsion. It has very high peel & excellent tack value, which forms instant bond with non-migrating properties. Due to which the long term durability is better. Excellent for continuous machine application. Bondex® ACR is a ready to use eco-friendly high peel Adhesives for Label / Stock rolls / PSA Sticker manufacturing.

Omnirad 369 is a highly efficient UV-curing agent used to initiate the photo polymerization of chemically unsaturated prepolymers – e.g., acrylates – in combination with mono- or multifunctional monomers.

Photomer® 4967 is an acrylated amine adduct, which exhibits low viscosity, low odor, improved stability, and excellent compatibility with monomers and oligomers. Cure characteristics and adhesion properties are enhanced when this product is properly formulated with photocatalyst (benzophenone).

Omnirad ITX is a highly effective type II photoinitiator used, in combination with tertiary amine synergists to, initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It can be used in combination with mono or multi functional monomers as reactive diluents.