Products in Luggage & Leather Goods: Automotive Exterior Parts

Paychlor S-68 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor D-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Dioshy TPU T995NCS is a Thermoplastic Polyurethane with a soft segment compositions of a ether group with well processing abilities, tough and elastic which are suitble to abrasion resistance, oil resistance and can be used when high mechanical properties are needed.

Paychlor S-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Makrostab® UV 2002 are stabilizer masterbatches used for increasing the UV stability of polymer. Their application is recommended in all cases where the basic stabilization from the resin producer is insufficient for a given application. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilization of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.

Dioshy TPU E998M is a Thermoplastic Polyurethane with a soft segment compositions of a ether group with well processing abilities, tough and elastic which are suitble to abrasion resistance, oil resistance and can be used when high mechanical properties are needed.

Neoplast™ 155 FT SW B are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

CP-Polymer Technik Wellamid® MRGF25/15 42H-N is a Polyamide 6 (Nylon 6) material filled with 40% glass\mineral. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding.Typical application of Wellamid® MRGF25/15 42H-N: Automotive

Paychlor D-42 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Dioshy TPU T980M is a Thermoplastic Polyurethane with a soft segment compositions of a ester group with well processing abilities, tough and elastic which are suitble to abrasion resistance, oil resistance and can be used when high mechanical properties are needed.

Paychlor S-52 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor D-58 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor K-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Neoplast™ 155 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Neoplast™ 163 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Dioshy TPU T995NC is a Thermoplastic Polyurethane with a soft segment compositions of a ether group with well processing abilities, tough and elastic which are suitble to abrasion resistance, oil resistance and can be used when high mechanical properties are needed.

Paychlor D-52 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

CP-Polymer Technik Wellamid® MR410 42H-N is a Polyamide 6 (Nylon 6) material filled with 40% mineral. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding.Typical application of Wellamid® MR410 42H-N: Automotive

CP-Polymer Technik Wellamid® MR409 22H-N is a Polyamide 66 (Nylon 66) material filled with 40% mineral. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of Wellamid® MR409 22H-N: Flame Rated.Typical application of Wellamid® MR409 22H-N: Automotive

SD Korea SVD-604 viscosity stabilizer is for stabilizing and controlling the viscosity of paste PVC sol.

Neoplast™ 173 C are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Hangzhou Hi-Tech Fine Chemical AC4000 is specially suitable for PVC extrusion and secondary high foam rubber and plastic free mode of foam and PEF; used in EVA MD injection, the size of the mold pressing, PE molded of PVC molding, coating and rubber molded foam, and rubbermolding and extrusion foaming. widely Use of high-grade EVA the MD shoe material, NBR + PVC insulation materials, seals and obturator leather.

Paychlor S-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor D-55 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Neoplast™ 135 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Paychlor K-40 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Neoplast™ 163 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Neoplast™ 173 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Makrostab® UV 0724/1323 are stabilizer masterbatches used for increasing the UV stability of polymer. Their application is recommended in all cases where the basic stabilization from the resin producer is insufficient for a given application. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilization of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.

Neoplast™ 155 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Dioshy TPU T998M is a Thermoplastic Polyurethane with a soft segment compositions of a ester group with well processing abilities, tough and elastic which are suitble to abrasion resistance, oil resistance and can be used when high mechanical properties are needed.

Makrostab® UV 1022/1019 are stabilizer masterbatches used for increasing the UV stability of polymer. Their application is recommended in all cases where the basic stabilization from the resin producer is insufficient for a given application. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilization of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.

Dioshy TPU E990M is a Thermoplastic Polyurethane with a soft segment compositions of a ether group with well processing abilities, tough and elastic which are suitble to abrasion resistance, oil resistance and can be used when high mechanical properties are needed.

Next ABS SX-02AVBK is ABS Un Filled Black Compound.

Neoplast™ 145 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Neoplast™ 180 C are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.