Products in Lawn & Garden: Polyolefins

LNP LUBRICOMP ML004 compound is based on Polypropylene (PP) resin containing 20% PTFE. Added features of this grade include: Wear Resistant.

Noblen® AGM 350 Natural is a polypropylene impact copolymer. True reactor grade provides consistent natural color making colorability very easy.   Applications:  Large components  Appliances  Automotive Interior Trim Boat Jet-propelled Vehicle    Features:  High Melt Flow    Benefits: Easy moldability with low pressure.  Consistently easy to color Quick cycle time

Espolex® 3255 is a TPV known for its excellent colorability and appearance. It forms strong bonds with polypropylene compounds and polyethylene, while exhibiting thermoplastic processing characteristics combined with rubber-like properties. It is particularly well-suited for two-shot molding. Its applications include: Handle grips Gaskets Active spoilers Appliances Automotive exterior trim Automotive interior trim Boats Jet-propelled vehicles Mud flaps Weatherstripping Over-molding Injection molded parts   Features: Excellent flowability Great surface appearance for styling Easy bonding with other materials Benefits: Anti-slip properties Noise reduction

Noblen® CHN-250 Natural is a talc-filled polypropylene impact copolymer with high stiffness. It is used in automotive interior applications requiring an excellent balance of impact, flow, and stiffness. This product is suitable for Injection molding.   Applications: Large components Appliances Automotive Interior Trim Boat Jet-propelled Vehicle   Features: Good stiffness with impact performance and high Melt flow   Benefits: Easy to fill large parts

Espolex® CPD-450 is a Thermoplastic Elastomer which processes like a thermoplastic and acts like a rubber with excellent flowability. Good balance of stiffness and durometer. Applications: Bin and Floor Mats Appliances Automotive Exterior Trim Automotive Interior Trim Boat Jet-Propelled Vehicle Mud Flaps Weatherstripping Over-molding Injection Molded Parts   Features: Heat Stabilized Black High Melt Flow   Benefits: Anti slip Noise reduction

Noblen® BPC 80 Natural is a polypropylene impact copolymer with 20% talc fill. ultra-high melt flow, which is excellent for low pressure molding and foaming (core back).   Applications: Large parts requiring ultra high flow and stiffness. Appliances  Automotive Interior Trim Boat Door Panel Jet-propelled Vehicle    Features: Heat Stabilized Very High Melt Flow   Benefits: Quicker cycle times Lower Pressure Molding

Noblen® AGM 250 Natural is a polypropylene impact copolymer with excellent cold temperature impact strength. True reactor grade with medium flow ability Low-stress whitening   Applications: Large parts requiring high impact. Appliances Automotive Interior Trim Head Impact Boat Jet-propelled Vehicle   Features: -20 ⁰C Temperature Ductility Good Scratch Resistance     Benefits: Low-stress whitening High Melt flow and impact balance Consistently easy to color

LNP LUBRICOMP ML008 compound is based on Polypropylene (PP) resin containing 40% PTFE. Added features of this grade include: Internally Lubricated, Wear Resistant.

SABIC's Specialties Business LNP LUBRICOMP MX06404 compound is based on Polypropylene (PP) resin containing 20% glass fiber and 15% PTFE. Added features of this grade include: Heat Stabilized, Low Extractable, Wear Resistant.

LNP LUBRICOMP FL004 compound is based on Polyethylene (PE) resin containing 20% PTFE. Added features of this grade include: Wear Resistant.

LNP LUBRICOMP PDXF89080 compound is based on Polyethylene (PE) resin containing proprietary lubricant. Added features of this grade include: Wear Resistant.

LNP LUBRICOMP ML003S compound is based on Polypropylene (PP) resin containing 15% PTFE. Added features of this grade include: Heat Stabilized, Wear Resistant.

LNP LUBRICOMP FL003 compound is based on Polyethylene (PE) resin containing 15% PTFE. Added features of this grade include: Wear Resistant.

SABIC's Specialties Business LNP LUBRICOMP MFL36S compound is based on Polypropylene (PP) resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Heat Stabilized, Wear Resistant.

LNP LUBRICOMP FP003 compound is based on Polyethylene (PE) resin, containing 15% PTFE/silicone. Added features of this grade include: Internally Lubricated, Wear Resistant.

LNP LUBRICOMP ML004S compound is based on Polypropylene (PP) resin containing 20% PTFE. Added features of this grade include: Wear Resistant, Heat Stabilized.

LNP LUBRICOMP MG004 compound is based on Polypropylene (PP) resin containing graphite powder. Added features of this grade include: Wear Resistant.

SABIC's Specialties Business LNP LUBRICOMP ML004LS compound is based on Polypropylene (PP) resin containing 20% PTFE. Added features of this grade include: Wear Resistant, Heat Stabilized, Low Extractable.

X-Pro® SP200 TF30 3033 is an automotive-certified, general-purpose black polypropylene with 30% talc reinforcement and 98% recycled content, designed for non-visual injection molding applications. This resin is applicable in various industries, including automotive, industrial, construction, consumer, lawn, and garden products.

X-Pro® PP 4910 is a general-purpose, lower melt flow, no break, 98% recycled content, polypropylene copolymer suitable for injection molding applications. It provides a low-cost alternative to virgin resin while maintaining comparable quality and processability.  Produced from: post industrial recycled polypropylene  Color: Black  Applications:  Composite Wheels  protective guarding  lawn and garden  automotive  industrial  construction  Processing Method: Injection molding  Melt Flow: 8 -12 g/10 min  Izod Impact - 44 min KJ/M2  Tensile @ Yield - 21 min MPa  Flexural Modulus 0.05 in / min - 828 min  Ash Content - <5% 

X-Pro® 20% GF PP is a polypropylene (unspecified) material reinforced with 20% glass fiber. It belongs to the category of basic thermoplastics under the plastics technology hierarchy. The material is commonly used in various applications, including automotive, construction, consumer, and industrial sectors. It is suitable for injection molding processing method. With its general purpose properties, this black-colored material is known for its versatility.

X-Pro® 10% GF PP is a polypropylene (unspecified) material with 10% glass fiber reinforcement. It is commonly used in various applications such as automotive, construction, consumer, and industrial. The material is suitable for injection molding processing method. It features general purpose properties and has a black color. Additionally, it contains PCR and PIR resin and includes glass fiber as a filler.

Trapylen® 9350 W serves as a versatile adhesion promoter or primer for film applications. It can be applied through spraying, dipping, brushing, or printing methods. This adhesion promoter is formulated with chemically modified polypropylene dissolved in water, exhibiting exceptional compatibility with polyolefin substrates. Specifically designed to enhance surface tension on treated and untreated PP, PE, and polyolefin blend films, foils, foams, and molded parts.

Trapylen® 9200 W is an adhesion promoter based on acrylic modified, chlorine- free polypropylene dissolved in water. It has outstanding affinity to polyolefinic substrates. It is especially developed to improve surface tension of treated and untrea- ted films, folls, foams and even molded parts of PP, PE, polyolefinic blends, a.o. The increase of wetting properties permits the bonding, printing, flocking and painting of such substrates. TRAPYLEN® 9200 W can be occassionally used as adhesion promoter incorporated in adhesives, inks and paints in case of sufficient compatibility.

Trapylen® 911 S is newly developed chlorine-free polyolefin with excellent adhesion properties on polyolefinic substrates such as polypropylene, PP/EPDM thermoplastic rubbers and with limitations to adhesion strength - as well to polyethylene. Further advantage of this grade is its good solubility in non-aromatic solvents. TRAPYLEN® 911 S is used as adhesion promoter for in printing inks, adhesives and paints, or as a straight primer.

Trapylen® 950 X is a chlorine-free polyolefin designed for superior adhesion on polyolefinic surfaces like polypropylene, PP/EPDM thermoplastic rubbers, and, to a lesser extent, polyethylene. functions as an adhesion promoter in printing inks, adhesives, and paints. As a primer, dissolve 5% solids in xylene for application via spraying, dipping, brushing, or printing.

Trapylen® 9600 W serves as primer and adhesion promoter systems for coating, bonding, printing, and laminating polyolefin plastics. These products or additives increase adhesion strength in applications like pretreating molded plastics, films, foils, and sheets and formulating printing inks for polyolefinics.

MOCOM Compounds ALTECH® PP-H A 4940/100 MR40 is a Polypropylene Homopolymer base polymer with a 40% talcum filler/additive system. It has easy release (demolding) and slip agent features, as well as being heat stabilized. It is commonly used in the automotive, building and construction markets for interior decoration/finishing, gardening tools, injection molded parts, and functional components, such as housings. Pre-drying conditions include a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or an air circulating dryer at 80-120°C for 2-4 hours. Processing Injection molding melt temperature is 200-250°C and the mold temperature is 20-70°C. Ensure that the barrel and mold temperatures are properly set before starting the injection cycle.

MOCOM Compounds ALTECH® PP-B A 4915/500 MR15 is a polypropylene heterophasic copolymer with 15% talcum as a filler/additive system. It has high heat stabilization, processing stabilization, and easy release (demolding) characteristics. The melting temperature for injection molding is 200-250°C and the mold temperature is 20-70°C. This material is suitable for automotive, building and construction market segments with typical applications such as housings, fixing elements, functional components and interior decoration/finishing, gardening tools, clothing/fasteners and exterior parts. To ensure optimum performance, it should be stored in a dry, light-protected environment not exceeding 30°C.

MOCOM Compounds ALTECH® PP-B A 4430/100 MR30 is a polypropylene heterophasic copolymer with 20% chalk and 10% talcum. It is heat stabilized and has easy release (demolding) and processing stabilized characteristics. For injection molding, the melt temperature should be 200-250°C and the mold temperature should be 20-70°C. This material is applicable in the building and construction, sport and leisure markets and is typically used for housings and functional components. It should be stored in a dry, light-protected environment, not above 30°C, for optimal results.

MOCOM Compounds ALTECH® PP-B A 4920/100 MR20 is a Polypropylene Heterophasic Copolymer with a 20% talcum filler/additive system that is heat stabilized, easy to release (demolding) and processing stabilized. It is suitable for Automotive, building and construction, electrical, and electronic applications, including interior decoration/finishing, gardening tools, exterior parts, and electrical components. Typical applications include housings, functional components, and fixing elements. Pre-drying conditions should be in an air-circulating dryer 80-120°C for 2-4 hours or in a dry air (desiccant) dryer 80-120°C for 2-3 hours. For best results, processing injection molding should be done at a melt temperature of 200-250°C and a mold temperature of 20-70°C.

MOCOM Compounds ALTECH® PP-H A 2040/652 GF 40 UV CP is a Polypropylene Homopolymer pre-dried in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours, or an air circulating dryer at 80-120°C for 2-4 hours. It is processed using Injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It contains 40% glass fibers and is chemically coupled, UV stabilized, easy release (demolding), slip agent and heat stabilized. These features make it suitable for machinery, building and construction, and it is typically used for injection molded parts, clothing/fasteners and gardening tools.

MOCOM Compounds ALTECH® PP-B A 4920/500 MR20 is a polypropylene heterophasic copolymer with a filler/additive system of 20% talcum. It is heat and processing stabilized and has easy flow, release, and molding properties. It is suitable for automotive, sport and leisure, and building and construction applications such as gardening tools, exterior parts, interior decoration/finishing, clothing/fasteners, and sports equipment. Processing injection molding should be done with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It should be stored in a dry, light-protected environment not exceeding 30°C.

MOCOM Compounds ALTECH® PP-B A 4430/120 MR30 UV is a Polypropylene Heterophasic Copolymer with 20% chalk, 10% talcum, and UV, heat, and processing stabilizers, as well as easy release (demolding) properties. For injection molding, a melt temperature of 200-250°C and a mold temperature of 20-70°C should be used. This thermoplastic is suitable for building and construction, electrical and electronic, and sport and leisure market segments, and can be used for domestic appliances, gardening tools, and exterior parts. Typical applications include housings, fixing elements, and functional components.

Terratek® WC200312 is a proprietary blend of wood flour and polypropylene. WC200312 contains 30% wood flour by weight.

Terratek® WC200145 is a proprietary blend of wood flour and biobased polyethylene for injection molding applications. WC200145 contains 30% wood flour and with Braskem GreenPE this formulation is fully biobased.