Products in Consumer Goods: Lubricant (Internal)

Sunlube EBS DA is in powder form and chemically known as Ethylene Bis Stearamide.

Sunlube MG-10 is in powder form and chemically known as Magnesium Stearate.

Polyfill Technologies Antistatic Masterbatch-PT3002 is a surface property modifier, which now-a-days finds extensive use by Plastics Processor, to reduce and control the static charges developed on the surface of plastic parts having large surfaces like film, fibers etc as spark discharge formed by static charges can produce serious accidents. Plastics, particularly sensitive to static build up Polyolefins, Nylon, Polyesters, Urethanes, Cellulosics, Acrylics etc. Antistatic Masterbatch-PT3002 is based on Ethoxy Amine, using LLDPE as a carrier resin, compounded in most modern extrusion equipment, using state of art technology.

Eco USA EMS-3635 Silicone Emulsions are proudly made in the USA formulated with 350cs polydimethylsiloxane silicone oil.

MATER 58 TH is a stearic acid made from from tallow. Depending on the volume solicited, vegetable oils can also be used as raw materials.

Trecora Chemical OX-18 is an oxidized polyethylene wax. Provides anti-block, release and gloss control properties. It is easily emulsified. Imparts a non-stick character to a coating that decreases the tendency for blocking. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Can aid in the resistance properties of a coating. Can be used to control gloss to achieve a desired matt effect. OX-18 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Sunlube EBS DA-SF is in fine powder form and chemically known as Ethylene Bis Stearamide.

MATER 53 EF is a stearic acid made from from tallow. Depending on the volume solicited, vegetable oils can also be used as raw materials.

Sunlube CA-10 is in fine powder form and it is chemically known as Calcium Stearate.

ChemPlasa Materials L-1030 is Polarity Amide Wax which used as a functional additive in many industrial applications.

Sunlube EBS DA-01 is in fine powder form and chemically known as Ethylene Bis Stearamide.

Shandong JinChangshu New Mstar Technology JCS-106 is the stabilizer which is a solid, neutral ester wax, It is compared with pure external lubricant, the sensitivity is lower. Due to its limited compatibility, it is not recommended for soft PVC processing.

Haftolat or the dry form, Haftolat/P, are very effective process aids produced from EPM rubber. I

Sunlube S-10 is in powder form and chemically known as Sodium Stearate.

Libnol G-21 is a Oleochemical Derivative. Intermediate Lubricant and Good Compatibility.

Sunlube S-32 is in powder form and chemically known as Stearyl Stearate.

ULTRA-PLAST™ WF109 improves the fiber dispersion in wood plastic composites based on PVC. It shows lubricating properties, thus increasing the output. ULTRA-PLAST™ WF109 is also very effective in other polyolefin compounds where improved processability is needed.

ChemPlasa Materials L-206F is Ethylene Bis Stearamide which used as a functional additive in plastics manufacturing.

MATER 560-1 is a stearic acid made from from tallow. Depending on the volume solicited, vegetable oils can also be used as raw materials.

ChemPlasa Materials L-102G is Ethylene Bis Oleamide which used as a functional additive in plastics manufacturing.

Sunlube BA-10 is in powder form and chemically known as Barium Stearate.

MATER 60 THD is a stearic acid made from from tallow. Depending on the volume solicited, vegetable oils can also be used as raw materials.

Sunlube MG-12 is in fine powder form and chemically known as 12- Hydroxy Magnesium Stearate.

MATER 59 TH is a stearic acid made from from tallow. Depending on the volume solicited, vegetable oils can also be used as raw materials.

ULTRA-PLAST™ TP07 works effectively as an internal/external lubricant in most plastics and WPC composites. It has high heat stability and shows no discolouration at temperature up to 2300 C. ULTRA-PLAST™ TP07 can be used with coupling agents in WPC applications.