Products in Other Building & Construction Applications: Excellent A...

MultiTech MultiFunctional L is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparency LED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs MultiTech MultiFunctional L is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

StanChem Polymers SC 6261 is a 100% acrylic copolymer emulsion designed for durable house and trim paints. Paints and coatings made with SC 6261, in addition to durability; also exhibit good wet adhesion, good dirt pick-up resistance and good gloss retention.

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Polem A OF is a branched, castor oil-based polyol emulsion.

Polem A 1155 is a branched, castor oil-based polyol.

RISUN 12000E is triethoxysilane terminated polyether polymer. It could be applied in moisture curing elastic sealant, elastic structure sealant and sealing coatings.

Polem A SLR is a two component, solvent free and low emission, self leveling, floor coating which cures to a tough yet soft and elastic material with a hard wearing, easy to maintain surface and a tolerance to a wide range of chemicals. Polem A SLR is supplied ready for use but can be further extended with Quartz.

Nordkalk ENRICH C is an ultrafine precipitated calcium carbonate (PCC) product created to replace titanium dioxide and binder in paints and coatings. The multi-functional product innovation of Nordkalk Enrich has increasingly generated greater attention across the market, creating value in various fields of application in paints & coatings, adhesives, paper, inks and building materials.

Polem A 1150 is a branched, castor oil-based polyol.

Polem A MC is a two component, clear aliphatic polyurethane coating. It provides excellent abrasion resistance, improved scratch resistance and a clear, mat finish.

StarBond® 150 is a cold-water soluble, low viscosity, non-ionic polymer for use in industrial applications. It is a natural polysaccharide designed to impart enhanced functional properties including: adhesion/binding, water retention, improved rheology and viscosity. StarBond 150 is an excellent product for binding and adhesive applications where economics is important

Kamicryl 61 is an 100% Acrylic Emulsion possessing excellent durability, adhesion, gloss and water resistance, designed for the formulation of premium quality exterior masonry paints and textured finishes. Paints based on Kamicryl-61 shows outstanding flow, leveling and film buildup. These properties improvement combined with excellent color acceptance and a high degree of resistance to dirt pickup, make it possible to formulate a wide range of premium paints. It is a surfactant stabilized system.

RISUN 30000T is trimethoxy silane terminated polyether polymer.

Polem A 1140 is a branched, castor oil-based polyol.

Polem A 1170 is a castor oil based polyester/ether.

Polem A 1145 is a branched, castor oil-based polyol.

RISUN 12000DS is dimethoxysilane and triethoxysilane mixed-terminated polyether polymer.

Polem A HL is a branched, castor oil-based polyol emulsion.

Polem A 1160 is a branched, castor oil-based polyol.

StarBond® 100 is a cold-water soluble, low viscosity, non-ionic polymer for use in industrial applications. It is a natural polysaccharide designed to impart enhanced functional properties including: adhesion/binding, water retention, improved rheology and viscosity. StarBond 100 is an excellent product for binding and adhesive applications where economics is important.

Nivapol Polycoat CFM is a solvent free, two component, colored waterproofing membrane. It is reactive and can only be applied by special, two component spray equipment.

Polem A 1165 is a branched, castor oil-based polyol.

Polem A JS is a solvent free high viscos two-component Polyurethane system.

KERILON® 201S is trimethoxy silane terminated polyether polymer. It could be applied in moisture curing elastic sealant, elastic structure sealant and sealing coatings.

Polem A SD is a solvent free, low viscosity, two component polyurethane resin based sub membrane and porefiller.

KERILON® 12000DS-A is dimethoxysilane and triethoxysilane mixed-terminated polyether polymer.

Nordkalk ENRICH C 50 is an ultrafine precipitated calcium carbonate (PCC) product created to replace titanium dioxide and binder in paints and coatings. The multi-functional product innovation of Nordkalk Enrich has increasingly generated greater attention across the market, creating value in various fields of application in paints & coatings, adhesives, paper, inks and building materials.

Polem A is a branched, castor oil-based polyol emulsion.