Products in Infrastructure, Roads & Paving: Tackifier

C5 Petroleum Resin XD-1001L is a kind of light yellow granular thermoplastic solid resin. It is mainly made of carbon five fraction by-product of ethylene plant and specific modifiers as raw materials. Through special production process, under certain temperature and pressure Under the conditions, the low-molecular-weight polymer produced by the polymerization reaction has good compatibility with natural rubber (NR), synthetic rubber, styrene polymers (such as SIS, SBS, SEBS, EVA), etc. Tackifying resins (such as terpenes, rosin and their derivatives) are also compatible. It has good water resistance, insulation, thermal stability, light stability, chemical stability to acid and alkali, good adhesion and low thermal conductivity.

Deotack 1100 is a tackifying resin.Deotack 1100 is a tackifying resin with an excellent compatibility in different polymers and bonding agents. The product is of a light color and neutral odor.

Polybut EM MM 15(A-75) is a water-based emulsion of medium molecular weight polyisobutene.

Polybut EM 30 (A-50) is a water-based emulsion of low molecular weight polybutene.

Polybut EM 0 (NI-50) is awater-based emulsion of low molecular weight polybutene.

Polybut EM HR 1000 (A-75) is a water-based emulsion of low molecular weight polyisobutene.

LESTAC P110 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

Pine Rosins PR 388.1 is a Diethylene glycol esters of rosin that are obtained by the esterification of rosin with diethylene glycol. These resins are viscous liquids at room temperature and they are mainly used as tackifiers and plasticizers specially in floor coating adhesives, depilatory waxes and road marking paints.

LESTAC P140 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

LESTAC P100 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

NEVTAC® LT is a highly aliphatic petroleum based liquid tackifying resin with a low softening point designed for low temperature applications. This hydrocarbon tackifer is stabilized with 0.1% antioxidant.

Polybut EM 190(A-50) is a water-based emulsion of low molecular weight polybutene.

C5 Petroleum Resin XD-1001J is a kind of light yellow granular thermoplastic solid resin. It is mainly made of carbon five fraction by-product of ethylene plant and specific modifiers as raw materials. Through special production process, under certain temperature and pressure Under the conditions, the low-molecular-weight polymer produced by the polymerization reaction has good compatibility with natural rubber (NR), synthetic rubber, styrene polymers (such as SIS, SBS, SEBS, EVA), etc. Tackifying resins (such as terpenes, rosin and their derivatives) are also compatible. It has good water resistance, insulation, thermal stability, light stability, chemical stability to acid and alkali, good adhesion and low thermal conductivity.

Polybut EM MM 12(A-60) is a water-based emulsion of medium molecular weight polyisobutene.

Polybut EM 0 (NI-15) is a water-based emulsion of low molecular weight polybutene.

Megawide Petrochemicals C5 Hydrocarbon Resin MP 100 is a thermoplastic resin specially suitable for Hot Melt Road Marking Paint as tackifier. It can enhance the toughness, hardness, and adhesion of paint to form a smooth face.

LESTAC P120 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

Polybut EM 600(A-50) is a water-based emulsion of low molecular weight polybutene.

LESTAC C100 is pale yellow color, thermal or catalysis-copolymerization process, thermoplastic resin,obtained from mainly thermal polymerizing unsaturated aliphatic diolefins and aromatic coumarone, indene derived from the process of thermal cracking of naphtha. The major usages are tackifier for pressure sensitive adhesive, because of its well balanced PSA properties such as tackness, adhesive strength and cohesive strength. This grade also can be use as the binder for Paint, Printing Ink, Rubber Compound, tire, water repellent agent, concrete curing agent and binder for asphalt, etc.

Noma Rosin Non Crystal is a gum rosin from Elliotti pine tres, with low tendency to crystallization.

Fushun Huaxing Petroleum Chemical HX-1690S is aromatic modified aliphatic hydrocarbon resin. HX1690S is a light colored premium aromatic modified aliphatic hydrocarbon resin with a narrow molecular weight distribution. It is primarily designed tackification of styrene-isoprene-styrene (SIS) block copolymers, but also has utility in natural rubber, poly-isobutylene, butyl rubber, EVA, APP and APAP. It is suggested as tackifying resin for high quality hot melt and hot melt pressure sensitive adhesives.

Polybut EM MM 15 (A-60) is a water-based emulsion of medium molecular weight polyisobutene.

Pine Rosins PR 388.2 is a Diethylene glycol esters of rosin that are obtained by the esterification of rosin with diethylene glycol. These resins are viscous liquids at room temperature and they are mainly used as tackifiers and plasticizers specially in floor coating adhesives, depilatory waxes and road marking paints.

Polybut EM 10 (NI-50) is a water-based emulsion of low molecular weight polybutene.

Polybut EM MM 10(A-60) is a water-based emulsion of medium molecular weight polyisobutene.

Polybut EM 200(A-50) is a water-based emulsion of low molecular weight polybutene.

Polybut EM MM 10(A-75) is a water-based emulsion of medium molecular weight polyisobutene.

Polybut EM MM 12(A-75) is a water-based emulsion of medium molecular weight polyisobutene.

Polybut EM HR 1000 (A-55) is a water-based emulsion of low molecular weight polyisobutene.

LESTAC P130 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

Puyang United Chemical C5 Petroleum Resin O-1098 is 100% C5 Aliphatic hydrocarbon resin. It's general type C5 resin for hot melt adhesive which has good balance between initial adhesive and holding power. The major usages of O-1098 are tackify a variety of adhesive polymers including natural rubber, synthetic polyisoprene, APAO, SIS and EVA. O-1098 is designed for thermoplastic road marking paint which has a low viscosity.