Products in Infrastructure, Roads & Paving: Weather Resistance

VINNAPAS® 530 ND is a construction dispersion for primers, cement admixes, and repair mortars. VINNAPAS® 530 ND is based on a vinyl acetate/ethylene copolymer. It reduces the elastic modulus and enhances adhesion. VINNAPAS® 530 ND is an unplasticized 55% dispersion of a vinyl acetate/ethylene copolymer in water.

PYRAX® WA Pyrophyllite is a unique natural mixture of platy silicates, principally pyrophyllite, and quartz. PYRAX WA has a coarser particles size than PYRAX B. As a replacement for mica, PYRAX WA is an excellent filler in joint compounds and dry wall muds. PYRAX WA imparts mud crack resistance to high build coatings such as texture paints and block fillers. PYRAX WA is a good inert filler for use in contractor flat paints, where it contributes to improved low angle sheen control and scrub resistance. When used in exterior paints, the neutral pH of pyrophyllite yields reduced frosting.

ECOTINT® SB YELLOW OXIDE 02 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB BLUE 09 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB GREENISH YELLOW 07 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB REDDISH YELLOW 13 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB GREEN 08 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB VIOLET 10 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB MEDIUM YELLOW 14 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB BLACK 04 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB MAGENTA 11 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB RED OXIDE 03 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB RED 05 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB WHITE 01 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB REDDISH YELLOW 12 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB ORANGE 06 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

Domacryl 975 is a low viscosity general purpose polyester resin for two-component cold plastic road markings. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCManual application with smoothing trowels and draw box unitsPedestrian crossings, stop lines, direction arrows

Domacryl 922 is a general purpose methacrylate resin for two-component cold spray plastic road markings. This resin is accelerator-free and can be used by itself or in combination with Domacryl 920.Features & BenefitsLow VOCCold spray plastics (1:1 system with Domacryl 920)Especially suitable for white formulations

Domacryl 960 is an extremely fast curing methacrylate resin suitable for permanent cold spray plastic road markings. This resin is amine pre-accelerated for curing with dibenzoyl peroxide. Features and BenefitsLow VOCCold spray plasticsExtremely reactiveEspecially suitable for white formulations

Domacryl 955 is a low viscosity methacrylate resin for hard two-component cold spray road markings. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCCold spray plasticsHard resin

Domacryl 948 is a methacrylate resin for flexible two-component cold plastic road markings, particularly suitable for roller application over large areas. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCManual application with rollerParticularly suitable for large areas

Domacryl 933 is a low viscosity methacrylate resin for flexible two-component cold plastic road markings. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCManual application with rollerParticularly suitable for large areas

Domacryl 937 is a low viscosity general purpose methacrylate resin for two-component cold plastic road markings. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCManual application with smoothing trowels and draw box unitsPedestrian crossings, stop lines, direction arrowsLow viscosity

Domacryl 939 is a general purpose methacrylate resin for two-component cold plastic road markings. This resin is accelerator-free and can be used by itself or in combination with Domacryl 935.Features & BenefitsLow VOCManual application with smoothing trowels and draw box unitsPedestrian crossings, stop lines, direction arrows

Domacryl 980 is a highly reactive methacrylate resin suitable for fast curing two-component cold spray plastic road markings. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCCold spray plasticsExtremely reactive

Domacryl 945 is a low viscosity general purpose methacrylate resin for two-component cold spray plastic road markings. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCCold spray plastics (1:1 system with Domacryl 949)For warm climate

Domacryl 940 is a methacrylate resin for flexible two-component cold spray plastic road markings. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCCold spray plastics (1:1 system with domacryl 942)Flexible resin

Domacryl 949 is a low viscosity general purpose methacrylate resin for two-component cold spray plastic road markings. This resin is accelerator-free and can be used by itself or in combination with Domacryl 945.Features & BenefitsLow VOCCold spray plastics (1:1 system with Domacryl 945)For warm climate

Domacryl 941 is a methacrylate resin for hard two-component cold spray plastic road markings. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCCold spray plastics (1:1 system with Domacryl 943)Hard resin

Domacryl 942 is a methacrylate resin for flexible two-component cold spray plastic road markings. This resin is accelerator-free and can be used by itself or in combination with Domacryl 940.Features & BenefitsLow VOCCold spray plastics (1:1 system with Domacryl 940)Flexible resin

Domacryl 943 is a methacrylate resin for hard two-component cold spray plastic road markings. This resin is accelerator-free and can be used by itself or in combination with Domacryl 941.Features & BenefitsLow VOCCold spray plastics (1:1 system with Domacryl 941)Hard resin

Domacryl 935 is a general purpose methacrylate resin for two-component cold plastic road markings. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCManual application with smoothing trowels and draw box unitsPedestrian crossings, stop lines, direction arrows

Domacryl 929 is a general purpose methacrylate resin for two-component cold plastic road markings with reduced odor. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCManual application with smoothing trowels and draw box unitsPedestrian crossings, stop lines, direction arrows

Domacryl 920 is a general purpose methacrylate resin for two-component cold spray plastic road markings. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow vocCold spray plastics (1:1 system with domacryl 922)Especially suiitable for white formulations

Domacryl 930 is a methacrylate resin for hard two-component cold plastic road markings. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCManual application with smoothing trowels and machine extrusionParticularly suitable for profiled road markings

Domacryl 992 is a methacrylate resin for flexible two-component cold plastic road markings. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow vocManual application with smoothing trowels and draw box unitsPedestrian crossings, stop lines, direction arrows