Products in Building & Construction: Laminate

Composite Materials Laminate B is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include insulation in power generation equipment and other structural applications when used in elevated temperatures. Composite Materials Laminate B is certifiable to MIL-I-24768/3, Type GEB.

Composite Materials Laminate A is composed of layers of a pigmented paper melamine resin inner cores and white, black, or colored cover sheets. The main difference between this product and ES-1 is that the Composite Materials Laminate A is colored rather than white. The material comes in a standard sheet size of 36 inches ± 1.00 x 39 inches ± 1.00, with standard thicknesses of 1/16, 3/32, and 1/8 inch. Standard finish options are polished, or P (highly polished and shiny), and Lamicoid satin, or LS (non-brushed and dull). Contact Customer Service for Availability.

MC511FR is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include structural applications when used in elevated temperatures. MC511FR also complies with MIL-I-24768/28, Type GEB-F. Certification to IEC standard is pending.

MC330 is a cotton cloth/phenolic resin composite which is specially processed to be used in cryogenic applications. Such applications include spacers for installation of liquid oxygen apparatus where temperatures are as low as minus 320° F.

ES1 is a melamine laminate composed of a white melamine paper core and various pigmented cover sheets. The three-ply material comes in a standard sheet size of 36 inches ± 1.00 x 39 inches ± 1.00, with standard thicknesses of 1/16, 3/32, and 1/8 inch. Standard finish options are polished, or P (highly polished and shiny), and Lamicoid satin, or LS (non-brushed and dull).

ES4 is composed of layers of a pigmented paper melamine resin inner cores and white, black, or colored cover sheets. The main difference between this product and ES-1 is that the ES-4 core is colored rather than white. The material comes in a standard sheet size of 36 inches ± 1.00 x 39 inches ± 1.00, with standard thicknesses of 1/16, 3/32, and 1/8 inch. Standard finish options are polished, or P (highly polished and shiny), and Lamicoid satin, or LS (non-brushed and dull). Contact Customer Service for Availability.

MC511AF is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include insulation in power generation equipment and other structural applications when used in elevated temperatures. MC511AF is certifiable to MIL-I-24768/3, Type GEB.

Phenolic paper based grade for mechanical applications. Good tensile, compressive and flexural strength. Primarily a machining material, but may be hot punched up to .093" thick. NP610 meets MIL-I24768/12 Type PBM, ASTM D709 Type X and IEC 60893-3-4 PFCP 201.

ES3 consists of a black phenolic paper core and two colored decorative surfaces impregnated with melamine resin. The three-ply, high performance material comes in a standard sheet size of 36 inches ± 1.00 x 39 inches ± 1.00, with standard thicknesses of 1/16, 3/32, and 1/8 inch. Standard finish options are polished, or P (highly polished and shiny), or LS (non-brushed and dull).

ES2 consists of three internal layers (two colored decorative surfaces, two white sub-cores just below the surfaces, and a black core centered in the thermoset composite material). ES-2 is a five-ply material, which comes in a standard sheet size of 36 inches ± 1.00 x 39 inches ± 1.00, with standard-thicknesses of 3/32 and 1/8 inch. Weights of the three standard-thickness sheets are approximately 7.0, and 9.3 lb., respectively. Standard finish options are polished, or P (highly polished and shiny), or LS (non-brushed and dull).

Gillfab® 1042 is a heat resistant laminate made from phenolic resin with fiberglass cloth reinforcement with smooth bondable faces intended for both laminate and sandwich construction.

Aekyung Chemical SL-100 is a DCPD type UPR.

Aekyung Chemical CW-350 is a tere type UPR.

55NT is an epoxy laminate and prepreg system, reinforced with a non-woven aramid substrate. This system combines compatibility with lead-free processing, using a hightemperature epoxy resin, with the low in-plane (x,y) expansion and outstanding dimensional stability of non-woven aramid reinforcement.

CFP Composites FR10 is a ultra lightweight fireproof carbon composite fire door materials.

The FloLam® PR surfacing film integrates a special release film with the FloLam® surface laminate and therefore includes all the benefits of the FloLam® surface laminate. Additonally, the use of the release film allows a clean and easy removal from the composites without transfer of any residues. The surfacing film also acts as a protective cover to the composite that can be removed by the end user later on.

Aekyung Chemical SLO-180NT is an ortho type UPR.

ACP Composites Carbon Fiber Plain Weave Veneers are an outstanding decorative laminate with a deep, glossy, three-dimensional finish. Manufactured with a clear, resin-rich carbon-fiber prepreg these veneers deliver a smooth, low porosity laminate with a mirror-like finish without the need for a clear coat to enhance the appearance. As the thinnest of our carbon fiber sheets, these veneers are easy to trim and cut. The single layer of 3K plain weave carbon fiber prepreg allow the sheets to be semi-flexible yet remain stiff like cardstock. They can bend in only one direction at a time making it suitable for either flat surfaces or pipes. Once cured, these sheets cannot be re-shaped. Therefore they will not lie flat on compound curves, convex or concave surfaces.Our proprietary Autoclave curing process produces the most consistent and highest quality gloss carbon fiber veneers possible. Manufactured using 100% real carbon fiber fabric pre-impregnated with high quality epoxy resin, these sheets are cured at high temperatures and pressure to ensure a strong, rigid product that cannot be re-shaped after cured. Unlike other manufacturing methods, our Autoclave curing process consistently yields flat, lightweight sheets with minimal voids, waves or buildups. These 1st quality sheets are manufactured with a clear, resin-rich carbon fiber prepreg which results in a smooth, low porosity laminate with a mirror-like finish. Our special blend of high strength epoxy resin guarantees a durable, stronger, longer lasting finish. The built in UV inhibitor in the 2x2 twill prepreg resists UV rays in outdoor applications. There is no need for fillers, gel coats or surface treatments to enhance the surface appearance of our sheets.

Acculam™ Epoxyglas G11/FR5 comprised of flame retardant/heat resistant epoxy resin and a woven fiberglass substrate. It qualifies to NEMA FR5 and MIL-I-24678/28.This material exhibits extremely high mechanical strength at elevated temperatures. It shows good dielectric loss and electric strength properties under both dry and humid conditions. It has good chemical resistance and low moisture absorption.

CFP Composites BM-5 is cost comparable to aluminum on a fully finished component basis, but with all the benefits of carbon fiber.

Aekyung Chemical CW-220 is an iso type UPR.

Acculam™ Epoxyglas HT-ESD comprised of an epoxy resin binder and a woven glass substrate. Surface properties are Electro Static Dissipative on 1 or 2 sides.Static dissipative properties are embedded in surface layer(s) making this ideally suited as test fixture material for printed circuit boards. Examples: Solder pallets, Assembly fixtures, Automated test equipment, ATE fixtures, and Electronic assembly workstation surfaces.

Acculam™ Phenolfab Canvas C/CE is a laminate sheet comprised of a phenolic resin binder and woven canvas (cotton) substrate. It qualifies to NEMA C & CE and MIL-I-24768/14/16.This material is characterized by good mechanical properties and toughness. It has higher impact strength than NEMA XX grades. Its good machining qualities, moisture resistance and excellent wear resistance can be used in a wide variety of applications.

MICAM EM42 is a limited fire hazard laminate which is a glass-fiber reinforced epoxy resin composite material. It is produced by a high temperature and high pressure process which produces a high strength void-free laminate suitable for a range of applications including electrical insulation and building construction applications.

The FloLam® PR+ is the ultimate enhancement for thermoplastic composites for both surface protection and esthetics. It is specially engineered to produce a close to Class “A” finish – no surface voids.

Versitex® VX10 is a cost-effective thermoplastic liner comprised of polypropylene resin reinforced with continuous bi-directional glass fibers to create high impact resistant panels. It resists rot, corrosion, and mildew and is not affected by cleaning related chemicals. Versitex VX Series wall panels provide significant energy absorption over traditional FRP panels and exhibit thermal expansion similar to aluminum. The bi-directional nature of Versitex provides consistent physical properties throughout the entire panel. Versitex is easily repaired by applying low heat.

Acculam™ Siliglas G7 comprised of a high performance silicone resin and a woven fiberglass substrate. It qualifies to NEMA G-7 and MIL-I-24768/17.This material has high heat resistance, low dissipation factor, and excellent arc resistance. It is flame resistant with low smoke evolution, and meets the needs of Class "H" insulation. It is used in high frequency telecom equipment, transformers and items subjected to high heat.

ACP Composites Carbon Fiber Twill Weave Veneers are an outstanding decorative laminate with a deep, glossy, three-dimensional finish ideally used in high-end decorative projects. Manufactured with a clear, resin-rich carbon-fiber prepreg these veneers deliver a smooth, low porosity laminate with a mirror-like finish without the need for a clear coat to enhance the appearance.

Versitex® VR3 is a cost-effective thermoplastic composite backed by a thin sheet of fabric to helppromote adhesion of injected or poured foam systems. These high impact resistant panels are comprisedof polypropylene resin reinforced with continuous bi-directional glass fibers. Versitex resists rot, corrosion,mildew, and is not affected by cleaning-related chemicals. Versitex VR Series panels provide significantenergy absorption over traditional FRP panels and exhibit thermal expansion similar to aluminum. Thebi-directional nature of Versitex provides consistent physical properties throughout the entire panel. Versitexis easily repaired by applying low heat.

Aekyung Chemical CW-2000 is an epoxy acrylate.

Lamitex® G-10CR/G-10 EP GC 21 laminated sheet is a woven glass fabric composite impregnated with an epoxy resin. It is primarily used for mechanical, electrical and electronic applications where extremely high mechanical strengths are required at room and moderate temperatures. It is frequently specified for its excellent resistance to chemicals and retention of good electrical properties in dry and high humidity environments. G-10 is non-brominated and is not flame retardant and should not be confused with a similar glass epoxy grade FR-4, which is flame retardant.

Von Roll Isola AR 600 P 01 is composed of epoxy resin and aramid fabric reinforcement.

Aekyung Chemical SL-112 is an ortho type UPR.

Lamitex® G-5 MF GC 21 glass/melamine laminated sheet is most frequently preferred for applications that require high mechanical strength, exceptional arc resistance and self extinguishing properties.

Vetronite® EGS 103 is composed of epoxy matrix and glass fabric reinforcement. it appears in Green beige color with EP GC 203 G-11 Standards.

Lamitex® C PF CC 22 cotton/phenolic sheet is intended for use in mechanical applications requiring high impact strength. It has lower mechanical strength than materials with glass substrates, but has superior impact resistance when compared to paper based laminates.