Products in Building & Construction: Binder & Resin

DiTech Binder & Resin A is a high viscosity polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of organic solvents, plasticizers and formaldehyde donors. The residual monomer content is below 1000ppm. The dispersion is characterized by a high bonding strength due to its high Mw PVOH content.

DiTech Specialty Binder & Resin is a low molecular weight liquid polymer derived by the depolymerization of butyl rubber. It vulcanizes at either ambient or elevated temperature with the standard curatives for butyl rubber. DiTech Specialty Binder & Resin is light gray and contains no solvents or additives. DiTech Specialty Binder & Resin has the lower viscosity of the two DiTech Specialty Binder & Resin available and is the preferred liquid butyl rubber for coatings applications. DiTech Specialty Binder & Resin provides gas impermeability, chemical resistance, moisture resistance, good electrical properties, and excellent vibration/sound damping qualities.

CASE Ingredients Binder & Resin B is a styrene acrylic copolymer emulsion designed for use in flexible fillers, caulks, sealant applications and architectural coatings. It enhances the workability and technical performance of many products. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.

MultiTech MultiFunctional L is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparency LED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs MultiTech MultiFunctional L is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

VINNAPAS® EP 706K (ULS) is a high-viscosity vinyl acetate-ethylene copolymer dispersion with low formaldehyde and low free VAM residue. It exhibits good machinability and strong wet tack, providing improved adhesion to films like polyvinyl chloride. Additionally, VINNAPAS® EP 706K (ULS) demonstrates very high plasticizer and solvent viscosity thickening responses.

VINNAPAS® B 100/20 VLE is an approximately 50% solution of a vinyl acetate/vinyl laurate copolymer in ethyl acetate. VINNAPAS® B 100/20 VLE can be diluted with esters, ketones, aromatic solvents, and chlorinated hydrocarbons. The solution's compatibility with alcohol is limited. VINNAPAS® B 100/20 VLE is not compatible with aliphatic compounds.

VINNOL® H 40/43 is a copolymer composed of approximately 66 wt.% vinyl chloride (VC) and approximately 34 wt.% vinyl acetate (VAc). Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes physical drying, resulting in the formation of a film once the solvent in the formulation has evaporated.

VINNAPAS® UW 1 FS is a tasteless, solid, thermoplastic homopolymer. It is a clear and colorless resin obtained through the polymerization of vinyl acetate. This versatile product finds application in various fields, including fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

VINNAPAS® CEZ 3031 is a medium-particle-size, protective colloid-containing aqueous dispersion of a terpolymer of vinyl acetate, ethylene, and vinyl chloride. The principal feature of VINNAPAS® CEZ 3031 is its wide range of uses in coating systems containing opacifying pigments. The dispersion is low in odor and is produced without the use of alkylphenol ethoxylate (APEO)-containing compounds.

VINNAPAS® EP 724 is a vinyl acetate-ethylene copolymer dispersion with a glass transition temperature of approximately +19°C, which is the highest among the VINNAPAS® EP product lines. It possesses exceptional cohesive strength (heat resistance) and tensile strength. The dried film formed by VINNAPAS® EP 724 is more flexible than PVAc polymer while maintaining good tensile strength and high creep resistance. Furthermore, the dried film exhibits low levels of tack.

VINNAPAS® 323 is a vinyl acetate-ethylene copolymer dispersion stabilized with polyvinyl alcohol and has a glass transition temperature (Tg) of +23 °C. It is specifically developed as a fast-setting and high-heat-resistant dispersion, offering compatibility with fully hydrolyzed PVOH. VINNAPAS® 323 is designed as a base for high-speed packaging applications. It demonstrates excellent wet tack, fast setting properties, and a moderate response to plasticizer thickening.

VINNAPAS® 530 ND is a construction dispersion for primers, cement admixes, and repair mortars. VINNAPAS® 530 ND is based on a vinyl acetate/ethylene copolymer. It reduces the elastic modulus and enhances adhesion. VINNAPAS® 530 ND is an unplasticized 55% dispersion of a vinyl acetate/ethylene copolymer in water.

VINNAPAS® EP 709 is characterized by its high cohesive strength and tensile strength, thanks to its Tg (glass transition temperature) of about +7 °C. It exhibits excellent adhesion to hard substrates and demonstrates great compatibility with inorganic fillers. As a result, VINNAPAS® EP 709 finds application in joint compounds and other building chemical applications.

DEHESIVE® 929 is a solvent-free, addition-curing silicone fluid designed for release applications. This product has good curing properties, very good flow properties and coverage, an extremely stable release, excellent bath life, and excellent long-term anchorage to a wide variety of substrates.

VINNAPAS® EF 539 is an aqueous dispersion of a vinyl acetate-ethylene (VAE) copolymer. It was specifically formulated as an environmentally friendly binder for intermediate-grade caulk formulations. The manufacturing process excludes the use of alkylphenol ethoxylates (APEOs), ensuring a reduced environmental impact. No formaldehyde or formaldehyde donors are intentionally added to this product. Furthermore, VINNAPAS® EF 539 has a low glass transition temperature (Tg), which contributes to its desirable performance characteristics.

VINNAPAS® EP 756 is a vinyl acetate-ethylene copolymer dispersion with a low viscosity and low levels of formaldehyde and free VAM residue. It demonstrates excellent machinability and strong wet tack. Additionally, it offers good adhesion to various plastic surfaces, allowing for the creation of permanently flexible adhesive joints with high cohesion.

VINNAPAS® EF 818 is an aqueous dispersion of a vinyl acetate-ethylene (VAE) copolymer. This product achieves a low minimum film-forming temperature without requiring a coalescing agent or plasticizer. It is manufactured without the use of alkyl phenol ethoxylate (APEO)-containing compounds. VINNAPAS® EF 818 serves as a cost-effective alternative for various technologies, including vinyl acrylics and styrene acrylics.

WACKER® Polymer FD 120 is a colorless, clear, and odorless liquid that is not miscible with water. It serves as a raw material for the production of RTV-1 silicone rubbers. This product is specifically used in the compounding of silicone sealants and is suitable for applications in sealants and silicone sealants.

SILRES® BS 6042 is a solventless, water-dilutable emulsion of a modified silicone resin that is specifically designed to be used as a standalone silicone in the production of silicone resin emulsion paints and plasters. When incorporated into coatings, SILRES® BS 6042 imparts several beneficial properties. These include long-lasting reduced water absorption, efficient resistance to early rain, and high water vapor permeability. These characteristics contribute to the overall performance and durability of the coatings, ensuring they maintain their effectiveness over time.

VINNAPAS® EP 4600 is a vinyl acetate-ethylene (VAE) copolymer dispersion stabilized with polyvinyl alcohol. It possesses a glass transition temperature (Tg) of +5°C. This dispersion was specifically formulated to have a low viscosity and high solids content, allowing it to accommodate high levels of fillers.

VINNAPAS® 418 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a soft hand is required. The dispersion combines moderately high solid content with a low viscosity, a combination that permits the addition of very high filler loadings, resulting in adhesive formulations with high solid contents.

VINNAPAS® SAF 608 is a water-based dispersion containing a fine-particle-sized copolymer of styrene and acrylic acid ester. It has a solid content of 50%. This product is manufactured without the inclusion of coalescents, organic solvents, plasticizers, or compounds containing alkyl phenol ethoxylate (APEO). It exhibits excellent penetration into porous substrates and offers great flexibility.

VINNAPAS® 827 ED is an all-round construction dispersion for two-component dry mix mortars and ready-to-use dispersion-based construction products. It is specifically suitable for ETICS/EIFS applications as a cement admix dispersion or sole binder in ready-to-use ETICS/EIFS base or top coats. VINNAPAS® 827 ED is a semi-flexible, medium-particle-size synthetic resin dispersion based on a terpolymer of vinyl acetate, ethylene, and vinyl chloride, and it contains a protective colloid.

VINNAPAS® EP 710 is a high-viscosity vinyl acetate-ethylene copolymer dispersion that is characterized by its low formaldehyde and low free VAM residue content. It exhibits good machinability and strong wet tack. VINNAPAS® EP 710 provides enhanced adhesion to films, particularly polyvinyl chloride. Additionally, it demonstrates high-viscosity thickening responses to plasticizers and solvents.

VINNAPAS® EZ 222 is a vinyl acetate-ethylene (VAE) copolymer dispersion stabilized with hydroxyethyl cellulose and surfactant. It has a glass transition temperature (Tg) of +18.0°C. This dispersion offers excellent scrub resistance, good flow and leveling properties, and low viscosity. It has a high solid content and is produced without the use of APEOs.

SILRES® BS 310 is a solventless emulsion that can be thinned with water. It consists of polysiloxane modified with a functional silicone resin. This product is specifically designed to be added to aqueous masonry coatings and primers, either during or after their manufacture. When used undiluted, SILRES® BS 310 serves as an additive for aqueous indoor paints or coatings. Its purpose is to enhance the workability of the paint or coating, resulting in improved application properties. This product is highly compatible with indoor paints and has a positive influence on wetting and leveling properties.

VINNAPAS® EP 8178 is a poly(vinyl alcohol) stabilized vinyl acetate-ethylene (VAE) copolymer dispersion. It has a glass transition temperature (Tg) of approximately -3 °C. This dispersion is specifically designed as a high-performance, ultra-high-solids dispersion for weather-resistant air barriers. It offers excellent water resistance, ideal mechanical properties, and the capability to handle high extender loadings.

VINNAPAS® 561 ED is a low Tg polymer dispersion based on vinyl acetate and ethylene. It exhibits excellent elongation, flexibility, and water resistance, making it ideal for numerous construction applications. VINNAPAS® 561 ED exhibits high filler loading capabilities and is compatible with both fully and partially hydrolyzed polyvinyl alcohols, as well as other synthetic latex polymer dispersions (such as styrene/acrylic and pure acrylic dispersions).

VINNAPAS® 400 H is a poly(vinyl alcohol)-stabilized vinyl acetate-ethylene copolymer dispersion with a glass transition temperature (Tg) of 0°C. It was developed as a higher-viscosity, high-performance dispersion offering a superior balance of adhesive and cohesive properties useful in achieving much higher formulation viscosities.

SILRES® BS 45 is a water-dilutable, solventless emulsion of a silicone resin that serves as a binder in the production of silicone resin emulsion paints and plasters. It is primarily used as the main binder in these formulations, playing a crucial role in their performance. The use of SILRES® BS 45 also contributes to low water absorption, which helps to minimize water ingress and enhance the durability of the coatings and plasters. Additionally, products formulated with SILRES® BS 45 have a low tendency to accumulate dirt and soil, maintaining a cleaner appearance over time.

VINNAPAS® EP 3455 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of alkyl phenol ethoxylate (APEO)-containing compounds. The dispersion offers very high scrub resistance, excellent hiding power, and exceptional pigment binding ability.

VINNAPAS® EF 8300 is an aqueous dispersion of a vinyl acetate-ethylene (VAE) copolymer. It was specifically formulated as a high-performance polymer for interior architectural coating formulations, offering environmental advantages. This technology serves as an alternative to various other technologies, including vinyl acrylic/acrylic blends, vinyl acrylics with wet adhesion, and pure acrylics.

SILRES® WH 80A is a water-reducible, solvent-free emulsion of siloxane that can be used to increase the beading and water repellency of cellulosic substrates. The modification of water-reducible organic polymers such as alkyds or acrylic latexes with SILRES® WH 80A will increase water repellency and beading after exposure to UV radiation.

VINNAPAS® EP 7000 is a poly(vinyl alcohol) stabilized vinyl acetate-ethylene (VAE) copolymer dispersion with a glass transition temperature (Tg) of approximately -3°C. It has been specifically developed as an ultra-high-solids dispersion, providing superior adhesion, wet tack, and setting speed compared to conventional VAE dispersions.

SILRES® BS 50 is a solvent-free, water-thinnable emulsion of a special blend of silicone resin and polydimethylsiloxane. It is recommended as an additive for porous masonry coatings to make them water-repellent. SILRES® BS 50 is particularly suitable for silicate emulsion paints and plasters.

VINNAPAS® EF 575 is a carboxylated vinyl acetate-ethylene copolymer dispersion stabilized with surfactants. It has a glass transition temperature (Tg) of 0 °C and serves as a versatile binder suitable for various applications, including caulks, sealants, and mastics. This product exhibits excellent adhesion to aluminum, galvanized and stainless steel, wood, FRP, and PVC substrates. Furthermore, VINNAPAS® EF 575 is manufactured without the use of alkylphenol ethoxylate (APEO) surfactants or defoamers.