Products in Structural Components: Molding Compound

Composite Materials Molding Compound A is a high-performance thermoplastic composite material that has been developed for applications requiring exceptional impact resistance, strength, and durability. Made from a polypropylene or polyamide resin matrix reinforced with both woven and randomly laid fibers, these moldable panels are favored as lightweight, high-performance replacements for steel, aluminum, magnesium, and other industrial materials, or alternatively as additional reinforcement for GMT panels.Features:High impact resistanceExceptional strength and durabilityLightweightMulti-layer glass fiber weave technologyReinforced with both woven and randomly laid fibersBenefits:Can replace traditional industrial materials like steel, aluminum, and magnesiumCan be used as an additional reinforcement for GMT panelsIdeal for use in structural vehicle components, such as front ends and bumper bracketsCan withstand high pressure and velocity conditionsApplications:Structural vehicle components, such as front ends and bumper bracketsIndustrial and manufacturing applications that require high impact resistance, strength, and durabilityAdditional reinforcement for GMT panels in various applications

Mitsubishi Chemical Advanced Materials is considered the world market leader in the production of classic glass-mat-reinforced thermoplastics (GMT). This semi-finished product in panel form was developed primarily as a substitute for metals (steel, aluminum etc.) and its main purchasers can be found in the automotive industry. This is where it is frequently pressed on the industrial scale into complex 3D structural components, although it is also used as panels.

SymaLITE is a special class of lightweight composites that offer low thermal expansion and exceptional mechanical and physical properties. Made from mixed glass and polymer fiber fleeces, SymaLITE is available in rolls and boards, which can be further molded into three-dimensional components using low-pressure molding.Features:Low thermal expansionExcellent mechanical and physical propertiesUltra-light and freely shapeableNoise-absorbentDirect facing with functional or decorative cover layers without adhesivesBenefits:Cost-efficient production of three-dimensional componentsDurable and noise-insulating material for car undershields and engine coversImpact-resistant and non-weathering for outdoor applications in the automotive and construction industrySubstitute for wood-based materials and rigid foams in sandwich constructions for the caravan and commercial vehicle industry.Applications:Automotive and caravan industryConstruction sectorCar headlinersOutdoor applications in the automotive and caravan industrySubstitute for wood-based materials and rigid foams in sandwich constructions for the caravan and commercial vehicle industry.

GMTex® is a high-performance thermoplastic composite material that has been developed for applications requiring exceptional impact resistance, strength, and durability. Made from a polypropylene or polyamide resin matrix reinforced with both woven and randomly laid fibers, these moldable panels are favored as lightweight, high-performance replacements for steel, aluminum, magnesium, and other industrial materials, or alternatively as additional reinforcement for GMT panels.Features:High impact resistanceExceptional strength and durabilityLightweightMulti-layer glass fiber weave technologyReinforced with both woven and randomly laid fibersBenefits:Can replace traditional industrial materials like steel, aluminum, and magnesiumCan be used as an additional reinforcement for GMT panelsIdeal for use in structural vehicle components, such as front ends and bumper bracketsCan withstand high pressure and velocity conditionsApplications:Structural vehicle components, such as front ends and bumper bracketsIndustrial and manufacturing applications that require high impact resistance, strength, and durabilityAdditional reinforcement for GMT panels in various applications

Polynt Group HUP 16/40 RN-Color is generally used in building and construction, foundries, peroxides applications.

Haysite Reinforced Plastics 46000 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

StarPCS™ SBMC-843 is a discontinuous carbon fiber reinforced molding compound containing carbon fiber, a Starfire proprietary polysiloxane resin, and refractory particulate. SBMC-843 contains a Polyramic® thermosetting resin which cures at temperatures between 200-310°C, and functions as a high temperature carbon fiber reinforced structure with a silicon oxycarbide ceramic matrix. Compression mold curing produces a green fiber reinforced polymer matrix composite (PMC) material. Further processing to 850°C minimum in inert environment results in an amorphous silicon oxycarbide ceramic matrix composite (CMC) to be used with different infiltration polymers or materials. Ideal infiltration polymers include Polyramic® SPR-212, SPR-212 based slurries (SL-227, SL-480), and other Starfire® polysiloxane products.

Polynt Group SMC LPMC 7200 Low pressure is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. SMC LPMC 7200 is studied to be molded at low pressure and has been developed for co-molding with phenolic foam. SMC LPMC 7200 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Haysite Reinforced Plastics 48600 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Polynt Group SMC 4900 AM is generally used in furniture, home and domestic applications applications.

Resinoid 2089 is a chopped fabric reinforced, two-step phenolic molding compound offering good physical and wear properties. This product has been specifically formulated for mechanical applications where minimal wear and low shrinkage values are desired. This material comes in bulk fabric form and is suitable for compression molding.

Polynt Group SMC 3500 Duralynt is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. This material has been developed to show a high weathering resistance. SMC 3500 Duralynt joints good mechanical properties and good flow SMC 3500 Duralynt is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group BMC S 1800 Structural is a bulk molding compound based on a blend of different thermoset resins reinforced with glass fibers. This BMC has been developed for structural application. Excellent mechanical properties, mainly impact resistance, and easy molding behavior are combined into the BMC S 1800. BMC S 1800 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group BMC LP 250/22 RF is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Good mechanical properties and good surface are combined into the BMC RF 1600/20. BMC RF 1600/20 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Resinoid 2002-4A is a fabric reinforced, two-step phenolic molding compound. It has been modified to meet gear requirements and other stressed applications. It possesses excellent impact and flexural strength. It is available in bulk form and is recommended for compression or transfer molding.

Polynt Group SMC 4200 R23 is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. This SMC has been developed for sink and tray application. SMC 4200 R23 joints good mechanical properties with stain and chemical resistance. SMC 4200 R23 has been studied to show a uniform pigmentation on the part molded. SMC 4200 R23 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Resinoid 2215 is an organic fiber reinforced compound offering moderate impact strength. This product is available in a small pellet suitable for compression, transfer and injection molding.

Polynt Group HUP 10/30 RN-Color is generally used in building and construction applications.

Polynt Group BMC 750 Granito is a bulk molding compound based on an unsaturated polyester resin, quartz filler and reinforced with glass fibers. This BMC has been developed for sinks application to replicate stone effect. BMC 750 Granito joint good surface durability and stain resistance. BMC 750 Granito is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group BMC 860 Duralynt is a bulk molding compound based on an unsaturated polyester resin, reinforced with glass fibers this material has been developed to show a high weathering resistance. BMC 860 Duralynt joints good mechanical properties and good flow BMC 860 Duralynt is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group SMC LS 3022 R30 is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. This SMC has been developed for structural parts. SMC LS 3022 R30 joint good mechanical properties and good surface. SMC LS 3022 R30 complies with BS 6920 water quality. SMC LS 3022 R30 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Resinoid 2277 is a chopped fabric reinforced, two-step phenolic molding compound. It was specifically developed for molding applications where a lightweight, high strength material with good impact strength is needed. This material comes in pelletized from and is suitable for transfer or compression molding and can be used in injection molding systems with deep flight screws. Resinoid 2277 meets the requirements of ASTM D-5948 CFI-20 (Formerly MIL M14/1 CFI-20).

Polynt Group SUP 6000-1001 1210 is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, reinforced with glass fibers. This BMC has been developed for façade panels. Sup 6000-1001 1210 joints excellent fire protection grade and high weathering resistance sup 6000-1001 1210 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group HUP 16/23 RB-7035-V is generally used in building and construction, electronic and electrical applications.

Polynt Group VUP-4400103WH-20S is generally used in home and domestic applications applications.

Resinoid 2005 is a cellulose reinforced, two-step phenolic molding compound. It exhibits excellent electrical and thermal properties and dimensional stability. This material comes in pelletized from and is suitable for transfer or compression molding. It can be preformed on automatic equipment.

Haysite Reinforced Plastics 14100 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Haysite Reinforced Plastics 30000 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

StarPCS™ SBMC-900 are carbon fiber reinforced molding compounds containing a discontinuous carbon fiber, a specially formulated StarPCSTM polycarbosilane resin, and refractory particulate. SBMC-900 and SBMC-998 can be used in the cured state, but are specifically designed for use as a ceramic matrix composite (CMC) thermal or mechanical structure.

Haysite Reinforced Plastics 18600 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Haysite Reinforced Plastics 42000 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Polynt Group HUP 16/20 RB-Color is generally used in building and construction, foundries, peroxides applications.

Haysite Reinforced Plastics 14200 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Polynt Group HUP 16/25 RN-Decor is generally used in building and construction, cosmetics, foundries, peroxides applications.

Haysite Reinforced Plastics 270FRII are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Polynt Group HUP 16/18 RN-Neutro is generally used in building and construction, food contact, home and domestic applications applications.