Products in Building Materials: High Strength

MC511FR is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include structural applications when used in elevated temperatures. MC511FR also complies with MIL-I-24768/28, Type GEB-F. Certification to IEC standard is pending.

17 oz. aramid and "soft glass" fibers are combined to make a fabric that is stronger than pure aramid and less abrasive than glass fabrics. This material is impregnated with a high temperature phenolic resin matrix, which produces a composite with excellent mechanical strength at elevated temperatures and adverse environments. Applications include wear plates for conveyor systems, valve plates, and compressor and pump vanes. Variations of this material may be developed for specific applications.

MC511AF is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include insulation in power generation equipment and other structural applications when used in elevated temperatures. MC511AF is certifiable to MIL-I-24768/3, Type GEB.

SANMODUR LC-20M is tooling material (chemical board) for models & molds in various processes. It is light weight and has excellent machinability. It has excellent dimensional stability, heat resistance and strength.

Nexa3D xFLEX475 White is an industrial strength UV resin that cures to a soft, elastomeric material.xFLEX475 is suitable for applications where resilience, snap back, and tear resistance is desired,such as lattice structures and functional prototyping. This single component resin is easy toprint, making it a superior material for elastomeric applications.

CoreLite PVC HT (High Temperature) is a closed-cell, cross-linked polymer PVC foam formulated for resistance to high temperatures, durability, rigidity and strength. It is compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many lightweight composite applications that will be exposed to high temperatures.

NYCOADAPT 2046 is a Nylon copolymer developed specially for applications that demand easy flow, exceptional toughness, and flexibility. Its moderately high melt viscosity processes easily on conventional extrusion equipment and yields products with extremely high tenacity and strength.

NYCOTUFF 1595 HS is a medium viscosity Nylon 6 resin, which offers superior flexibility and toughness in both molding and extrusion applications. Its high melt viscosity and strength provides excellent processability and yields extremely tough and resilient finished articles.

NYCOTUFF 2176 is a high viscosity resin particularly suitable for extrusion processing. Its high melt viscosity and extremely good melt strength provides ease of processing for tubing, complex profile, and mandrel extrusion.

CoreLite PVC is a closed-cell, cross-linked polymer PVC foam formulated for durability, strength, and high processing temperatures. It is compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many lightweight composite applications.

CompositeWrap™ UDC20 Carbon Fabric is a medium weight, high tensile strength unidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ UDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

Flow aid™ is a processing aid cum lubricant with high thermal stability & offers both external & internal lubrication to PVC melt. It is very effective in the dispersion of higher contents of calcium carbonate, with a considerable increase in gloss & strength. Flow aid™ provides excellent anti-sticking properties to the PVC melt resulting in a smooth & glossy surface of the end product.

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

CoreLite PVC HT (High Temperature) is a closed-cell, cross-linked polymer PVC foam formulated for resistance to high temperatures, durability, rigidity and strength. It is compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many lightweight composite applications that will be exposed to high temperatures.

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

CAPXIDAN® LG is a modified copolymer produced with a proprietary, patent pending formulation. It is designed to be coextruded over Wood-Plastic Composite (WPC) deckboards to provide moisture, stain and wear resistance, esthetics, low gloss, durability at elevated temperatures, and unprecedented adhesion to the WPC substrate. CAPXIDAN® LG is a two-component capstock system. The CAPXIDAN® resin should be extruded together with a specific synergistic additive masterbatch in the recommended proportion of 98:2 by weight.

NYCO6 471 is a medium viscosity Nylon 6 resin particularly suitable for extrusion processing. It possesses an excellent combination of strength, and toughness; as well as excellent heat, chemical, and abrasion resistance inherent to Nylon 6.

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

CoreLite PVC is a closed-cell, cross-linked polymer PVC foam formulated for durability, strength, and high processing temperatures. It is compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many lightweight composite applications.

CompositeWrap™ BDC20 Carbon Fabric is a medium weight, high tensile strength bidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ BDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

CoreLite PVC is a closed-cell, cross-linked polymer PVC foam formulated for durability, strength, and high processing temperatures. It is compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many lightweight composite applications.

Micaclad Conductive Silver Flakes (CSM100) is a highly conductive silver mica with a dry bulk resistivity of .002 ohms/cm. These pure silver platelets have the shielding and conductive roperties of solid metal silver with a fraction of the cost. The blanketing effect of silver and the reinforcement advantages of the mineral help provide strength and a stable conductive surface.

CAPXIDAN® HD is a Modified Copolymer produced with a proprietary, specialized formulation. It is designed to be coextruded over Wood-Plastic Composite (WPC) deck boards to provide moisture, stain, wear resistance,esthetics, durability at elevated temperatures, and unprecedented adhesion to the WPC substrate. CAPXIDAN® HD is a two-component capstock system. The CAPXIDAN® resin should be extruded together with a specific synergistic additive masterbatch in the recommended proportion of 98:2 by weight.

CoreLite PVC is a closed-cell, cross-linked polymer PVC foam formulated for durability, strength, and high processing temperatures. It is compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many lightweight composite applications.

CoreLite PVC is a closed-cell, cross-linked polymer PVC foam formulated for durability, strength, and high processing temperatures. It is compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many lightweight composite applications.

CoreLite PVC is a universal closed-cell, cross-linked polymer PVC foam formulated for durability, strength, and high processing temperatures. It is compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many lightweight composite applications.

NYCO6 471 R is a medium viscosity Nylon 6 resin particularly suitable for extrusion processing. It possesses an excellent combination of strength, and toughness; as well as excellent heat, chemical, and abrasion resistance inherent to Nylon 6.

CoreLite PVC is a closed-cell, cross-linked polymer PVC foam formulated for durability, strength, and high processing temperatures. It is compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many lightweight composite applications.

NYCOTUFF 1595 HS Black B14 is a medium viscosity, impact toughened Nylon 6 based compound. It offers superior flexibility and toughness in both molding and extrusion applications. Its high melt viscosity and strength provides excellent processability and yields extremely tough and resilient finished articles.

Nexa3D xFLEX475-Black is an industrial strength UV resin that cures to a soft, elastomeric material. xFLEX475 is suitable for applications where resilience, snap back, and tear resistance is desired, such as lattice structures and functional prototyping. This single component resin is easy to print, making it a superior material for elastomeric applications.

ECP 145/4332 Anti Static Conductive Nylon 6 Injection Molding Compound for injection molding and extrusion applications, Injection molding compound based on Nylon 6 and special conducting Carbon Blacks. The compound has been specially formulated with impact modification to provide a compromise of strength with the electrical conductivity requirements laid out for materials in BS IEC 61340-5-1:2007 and DEF Std 59-98.

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

CoreLite PVC is a closed-cell, cross-linked polymer PVC foam formulated for durability, strength, and high processing temperatures. It is compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many lightweight composite applications.

Paracril BLTM80 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Techno Compound PBT4 GF 10 Natural (9993) is a thermoplastic which combines great hardness, stiffness and strength. TechnoDur is easily processed due to its perfect flow behavior. The favorable sliding and wear characteristics as well as extremely high tenacity in temperatures below freezing are further advantages.

This product is a polyurethane system. Mechanical data according to test pieces post-cured for 8 hrs. at 80°C. No heavy chemical and mechanical stress before 7 days after curing at room temperature (20-23°C).