Products in Other Automotive & Transportation Applications

Blu Dot Asia CCF06PU is produced by chopping carbon fiber roving/thread into shorter lengths with different sizes.

Aptek® 2214-A/B is a carbon-filled, thixotropic, two component, electrically conductive, flexible urethane coating/adhesive designed to dissipate an electrostatic charge. This low-outgassing system provides a combination of high flexibility and good tensile strength/elongation characteristics. Aptek® 2214-A/B Space Grade, Low Modulus Urethane ESD Coating/Adhesive.

ROTEC® AES A 707 is AES, extrusion and injection molding grade, high-impact.

ULTRA-FLEX™ AS is an antistatic plasticiser, designed to reduce the surface resistivity of rubber compounds. The application is predominantly in mineral filled systems where, as opposed to carbon black filled, conductivity is very low. Depending on formulation, surface resistivity of 1 x 107 Ω can be achieved. ULTRA-FLEX™ AS starts solidifying below 250 C. Once solidified the material has just to be warmed up to above 250. The solidifying process is 100% reversible.

Inhance Fluoro-Seal UH-1500 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

THERMLfilm® THT™ 9001 is a durable thermal transfer printable topcoat that allows for printability at 600 DPI for high-density barcodes like data matrix codes while maintaining consistent ANSI scannability. Permanent pressure-sensitive adhesive adheres well to standard PCBs, and the adhesive has a low outgassing rate.

Windform® GF 2.0 is a composite material with a polyamide base, which is filled with glass and aluminum. These updated properties present improvements upon the previous Windform® GF formula with increases in thermal, mechanical and esthetic properties. Windform® GF 2.0 shows a significant improvement in the HDT (almost +8%), as well as increases in tensile strength and elongation strength, offering greater ductility than the previous version. This is useful for various racing applications and applications subject to vibrations. Windform® GF 2.0 also has excellent mechanical properties per unit of density, thanks to its lighter weight. Windform® GF 2.0 is a light gray color, with a radiant metallic sheen, which is appreciated in many design and wind tunnel applications. Improvements in detail reproduction make Windform® GF 2.0 suitable for applications which require accurate and superior surface definition, such as for proof of concept parts, or for mock castings.

Hangzhou Henghao Pigment Chemical Fluorescent brightener PF is a a light yellow crystal powder.

Aluminium pigments, paste

Trecora Chemical CHU30P has low to medium viscosity, high melting point and hardness. It is used as a performance additive for hot melt adhesives..

Johoku Chemical JP-308E is a antioxidant, heat resistance stabilizer, non-discoloring stabilizer for plastics, lubricants.

PEROXAN MI-60 KPX + is Mixture of Methyl isobutyl ketone peroxide and tert-Butyl peroxy benzoate Solution in TXIB.PEROXAN MI-60 KPX+ is used for the curing of unsaturated polyester resins as such or in presence of a cobalt accelerator in the temperature range of 60° to 150°C.

Oxnilon 6-50GF is a 50% glass fiber filled nylon 6 for injection molding.

THERMLfilm SELECT® 10852 is a layered polyester that is resistant to temperature extremes, abrasion, and chemical exposure for maximum label protection. When printed with resin or wax/resin thermal transfer ribbons, topcoat resists smudging and abrasion.

Inhance Fluoro-Seal UH-1750 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

PERGAPROP BIB-20 PP-FN is Di-(2-tert.-butyl-peroxyisopropyl)-benzene 20%, Granules with Polypropylen.PERGAPROP BIB-20 PP-FN is used for the production of controlled rheology polypropylene (CR-PP).

Reacrone PCL-850 is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto fumed silica.

MCA is a Melamine Cyanurate is a halogen‐free flame retardant for polyamide.Steadable color, good electrical property and environmentally friendly, Melamine Cyanurate has established itself as the flame retardant to achieve UL 94 V‐0 especially for polyamide 6 and 6,6. Addition of MCA gives PA6(66) good mechanical and electrical properties.

Changzhou Juyou New Material Technology JY201-10000 has a strong shearing resistance, good transmission of light low surface tension , excellent water repellency and moisture resistant and low volatilitioon.

PEROXAN EPC-60 WN-A is Di-(2-ethylhexyl)-peroxydicarbonate 60%, Emulsion in water and methanol.PEROXAN EPC-60 WN-A is used for the (co)polymerization of vinylchloride and vinylidenechloride.

Lu'An Jietonda New Material SA501 is a Film hardening agent for powder coatings.Jietonda® SA501 is a modified PTFE wax used for powder coatings to increase hardness and smoothness of film.

Hangzhou Henghao Pigment Chemical Fluorescent brightener PFK is a yellow crystal powder.

PEPLPET B 101C PET is a Pet Bottle Grade.

Silpak RU-491 are two-component, high performance, 100% solids Urethane Elastomers developed for their toughness and ease of processing. Applications include automotive and concrete tooling, rapid prototyping, Special FX, and any application where high resiliency, durability, and a firm rubber are required.

NYPOL® A3 G30 HS RH UV PRTA011 NR393K is a 6.6 black polyamide with 30% thermostable fiberglass with UV protection

Everstab LS622 main applications are Polyolefin (PP,PE), Olefin copolymers such as EVA as well as blends of Polypropylene with Elastomers. It is also highly effective in Polyacetals, Polyamides and Polyurethane applications.

Duresco NU 3723 N is a Glass fiber reinforced epoxy molding compound with high temperature resistance and very good dimensional stability.Excellent chemical resistance.

Epaflex ET 220 SCB 1002 P is a two-component polyurethane system suitable for the production of an expanded and flexible material. Particularly suitable for making air filter gaskets for automotive use, "panel" type.

Antioxidant 697 is a sterically hindered phenolic antioxidant and metal deactivator. Antioxidant 697 protects polymers against oxidative degradation and metal catalyzed degradation during processing and in end‐use applications. This antioxidant also provides long term thermal stabilization properties. This phenolic antioxidant is an excellent, non‐discoloring, non‐staining antioxidant and thermal stabilizer with outstanding metal deactivation properties. Typical end use applications include wire and cable insulation, film and sheet manufacture as well as automotive parts. Antioxidant 697 will stabilize polypropylene, polyethylene, polystyrene, polyester, EPDM, EVA and ABS. Low volatility ,Strong synergistic effect with phosphites, other phenols and thioesters, Non‐staining and non‐discoloring,FDA approved for adhesives and polymers.

TBBA is mainly used for epoxy resin, polycarbonate polyester, phenol resin, polyurethane etc. also use for polystyrene, ABS,unsaturated polyester a flame ‐retardant‐additive.

PROFLEX N1 is a semi-transparent material for general use Extrusion.

Prime ABS Weather-X 401 Film is a thin gage extruded acrylic (PMMA) protective cap film that can be laminated to plastic substrates, such as ABS, HIPS, and PMMA. Its exceptional UV protection extends the indoor and outdoor durability of the base sheet. Extruded acrylic film also protects the substrate from yellowing and fading. Its consistent high gloss outshines the finish of brown acrylic films. This tough film also provides abrasion resistance, mildew and fungus resistance, as well as, protection from chemical spillage.

Cel-Span® Process Aid 701 is a molecular concentrate used as a replacement for the traditional metal halides for stabilization of Nylons at high temperatures. This product is used at 1% - 3% active level depending on the type of compound and processing conditions. Cel-Span® Process Aid 701 also provides gloss, ozone, and bleach resistance to nylon fibers, without the use of metal halide stabilizers.

Hangzhou Henghao Pigment Chemical Fluorescent brightener KCB is a yellow-green crystal powder.