Products in Automotive & Transportation: Wires

653 Products found in Automotive & Transportation

Browse Applications

GuangDong Sky Bright One Pack Stabilizer banner

GuangDong Sky BrightGuangDong Sky Bright One Pack Stabilizer

Functions:PVC Stabilizer, Stabilizer
Compatible Polymers & Resins:Polyvinyl Chloride (PVC)
End Uses:Cables, Pipes, Profiles, Fittings, Wires, Conduit, Flooring, Foamed Insulation Board, Hoses

GuangDong Sky Bright One Pack Stabilizer is suitable for different products such as foaming board, compound for wire and cable, edge banding strip, fitting, hose, profile, rigid conduit and pipe, and SPC floor materials.

SEBS - ELASTRON G101.D60.N banner

ElastronSEBS - ELASTRON G101.D60.N

Tear Strength:99.0 - 99.0 kN/m
Strain at Break:550.0 - 550.0 %

A hard, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

Paracril™ OZO3341 banner

Dynasol ElastomersParacril™ OZO3341

Polymer Name:NBR/PVC

Paracril OZO3341 is a pre-fluxed blend of NBR/PVC containing 30% PVC and 28% BAN NBR base polymer.

DK Kunststoff PPA GF20 banner

DK KunststoffDK Kunststoff PPA GF20

Polymer Name:Polyphthalamide (PPA)
Fillers Included:Glass Fiber

PPA GF20 is a 20% glass fiber reinforced poly phthalamide.

RoyalEdge® 5041 banner

Lion ElastomersRoyalEdge® 5041

Applications:Other Wire & Cable Applications, Jacketing & Insulation, Powertrain & UTH
Product Families:EP Rubbers (EPDM), Thermoset Elastomers
Chemical Family:Ethylene-Propylene Copolymers (EPR), Polyolefins
Polymer Name:Ethylene Propylene Diene Terpolymer (EPDM)
End Uses:Cable Jacketing, Wires, Cables

A High Ethylene, Low Viscosity Polymer with High Green Strength for Wire and Cable Applications

Sylvin™ 5132-70UV Clear banner

Sylvin TechnologiesSylvin™ 5132-70UV Clear

Polymer Name:Polyvinyl Chloride (PVC)
Processing Methods:Extrusion
Additives Included:UV Stabilizer
End Uses:Wires, Cables, Tubing

Sylvin Technologies Sylvin™ 5132-70UV Clear is a clear vinyl compound formulated for wire insulating applications such as speaker wire, booster cable, and extruded tubing. This compound contains an ultra violet stabilizer and can be color matched to a variety of colors.

SEBS - ELASTRON G300.A85.N banner

ElastronSEBS - ELASTRON G300.A85.N

Tear Strength:46.0 - 46.0 kN/m
Strain at Break:750.0 - 750.0 %
Compression Set (70 °C):56.0 - 56.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

Paychlor S-62 banner

Payal GroupPaychlor S-62

Chemical Family:Alkanes, Mineral Oils
Functions:Plasticizer
Compatible Polymers & Resins:Polyvinyl Chloride (PVC)
End Uses:Synthetic Leather, Automotive Applications, Flooring, Automotive Exterior Parts, Footwear, Medical/Healthcare Applications, Cables, Wires, Hoses, Pipes, Conveyors, Automotive Interior Parts

Paychlor S-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

SEBS - ELASTRON G100.A90.N banner

ElastronSEBS - ELASTRON G100.A90.N

Tear Strength:60.0 - 60.0 kN/m
Strain at Break:550.0 - 550.0 %
Compression Set (70 °C):60.0 - 60.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON G300.A36.N banner

ElastronSEBS - ELASTRON G300.A36.N

Tear Strength:16.0 - 16.0 kN/m
Strain at Break:800.0 - 800.0 %
Compression Set (70 °C):34.0 - 34.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

TPO - ELASTRON T100.D60.B banner

ElastronTPO - ELASTRON T100.D60.B

Polymer Name:Thermoplastic Polyolefin (TPO)
Processing Methods:Injection Molding
Features:High Hardness
Density:980.0 - 980.0 kg/m³
Strain at Break:250.0 - 250.0 %

A hard, black thermoplastic polyolefin elastomer (TPO) material belongs to thermoplastic elastomer (TPE) family designed for general purpose applications.

Rostabil TTDP banner

PCC ChemaxRostabil TTDP

Functions:Thermal Stabilizer, Antioxidant, Stabilizer
Chemical Family:Phosphorous-based Compounds
Labeling Claims:Other Labeling Claims
Compatible Polymers & Resins:Styrene Butadiene Rubber (SBR), Polyvinyl Chloride (PVC)
Physical Form:Liquid

Rostabil TTDP is a specialist additive for plastics used as a process stabilizer. It is available in the form of a homogeneous liquid with a characteristic, delicate fragrance. It prevents degradation of polymer materials during processing. Provides thermal protection of polymers, eliminating the effect of yellowing of finished products. Strengthens the color stability of materials containing pigments and provides transparency of non-pigmented products.

Ficel® LE banner

Hughes Polymer AdditivesFicel® LE

Functions:Foaming Agent
Compatible Polymers & Resins:Polyvinyl Chloride (PVC)
End Uses:Wires, Sporting Goods, Wire Jacketing, Cables

Ficel® LE is used as Flexible PVC/Plastisol.

Petkim PETILEN H2-21T banner

PetkimPetkim PETILEN H2-21T

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Coating, Film Extrusion, Extrusion
Melt Flow Index:2.5 - 2.5 g/10 min

PETILEN H2-21T is a low density polyethylene resin produced by high pressure tubular process. Having medium average molecular weight, the product is developed for general purpose applications. PETILEN H2-21T contains no additives.

MARFRAN® B CV2 banner

MARFRANMARFRAN® B CV2

Polymer Name:Styrene Butadiene Styrene (SBS)
Processing Methods:Injection Molding

MARFRAN® B CV2 is a TPE-SSBS base polyolefin polymers or styrenic polymers with SBS elastomer. This compounds for injection and extrusion molding, soft to the touch, easy to work, colorable, high transparency, highly elastic, resistant to abrasion, in various flexural and hardness modules

SEBS - ELASTRON G400.A80.B banner

ElastronSEBS - ELASTRON G400.A80.B

Tear Strength:50.0 - 50.0 kN/m
Strain at Break:850.0 - 850.0 %
Compression Set (70 °C):55.0 - 55.0 %

A soft, black unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good abrasion resistance is required.

Moulex® TMPTMA 70 banner

AdditekMoulex® TMPTMA 70

Chemical Name:Trimethylolpropane trimethacrylate
Compatible Polymers & Resins:Chlorosulphonated Polyethylene Rubber (CSM)
Functions:Vulcanizing Agent
Features:Low Compression Set, Chemical Resistant, Good Mechanical Properties, Good Solvent Resistance

Moulex® TMPTMA 70 by Additek is a vulcanization co-agent on carrier silica. It offers increased mechanical properties with peroxide cured compounds. It exhibits increased resistance to solvents. Provides improved compression set.

Shenzhen Xinghua Pigment Masterbatch Pigment Yellow 12 banner

Shenzhen Xinghua Pigment MasterbatchShenzhen Xinghua Pigment Masterbatch Pigment Yellow 12

Chemical Name:2,2'-[(3,3'-dichloro[1,1'-biphenyl]-4,4'-diyl)bis(azo)]bis[3-oxo-N-phenylbutyramide]
Functions:Pigment
Pigment Type:Organic Pigments
CI Number:21090
Color:Yellow

Shenzhen Xinghua Pigment Masterbatch Pigment Yellow 12 is yellow colored disazo pigment. It provides high heat resistance, excellent light fastness and very good migration resistance. Pigment Yellow 12 can be used in PP, PVC and rubber. It is recommended for PE, EVA and POM.

BTec™ BSI-9170-HFP banner

Britec SolutionsBTec™ BSI-9170-HFP

Functions:Foaming Agent
Processing Methods:Coextrusion, Structural Foam Molding, Extrusion, Cable Extrusion, Co-Injection Molding, Injection Molding, Rotational Molding
End Uses:Wires, Housings, Toys, Cables, Housewares, Automotive Interior Parts
Labeling Claims:Environmentally Friendly

BTec™ BSI-9170-HFP is an endothermic CFA’s chemicals that take heat out and typically produce much smaller cell structure creating improved processing, better physical properties and improved appearance.

SEBS - ELASTRON G100.A30.N banner

ElastronSEBS - ELASTRON G100.A30.N

Tear Strength:17.0 - 17.0 kN/m
Strain at Break:800.0 - 800.0 %
Compression Set (70 °C):41.0 - 41.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

Kebaflex® / U A 85 EF B01 natural banner

BARLOG plastics GmbHKebaflex® / U A 85 EF B01 natural

Density:1180.0 - 1180.0 kg/m³
Strain at Break:650.0 - 650.0 %

BARLOG plastics GmbH Kebaflex® / U A 85 EF B01 natural is a TPE-U, Shore A85, easy flowing. The trade name KEBAFLEX / U stands for a range of thermoplastic polyurethane elastomers. KEBAFLEX / U is characterized by excellent sliding and wear behavior, suitability for use at elevated temperatures, good UV resistance and high mechanical resilience.

Elastoflo 30A-300 banner

KMI GroupElastoflo 30A-300

Applications:Other Consumer Goods Applications, Medical Devices & Assemblies, Other Oil, Gas & Mining Applications
Product Families:Styrenic Thermoplastic Elastomers (TPE-S), Thermoplastic Elastomers
Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
End Uses:Medical Devices, Automotive Interior Parts, Automotive Exterior Parts

Elastoflo 30A-300 (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM.

TPO - ELASTRON T100.D43.B banner

ElastronTPO - ELASTRON T100.D43.B

Polymer Name:Thermoplastic Polyolefin (TPO)
Processing Methods:Injection Molding
Features:High Hardness
Density:980.0 - 980.0 kg/m³
Strain at Break:500.0 - 500.0 %

A hard, black thermoplastic polyolefin elastomer (TPO) material belongs to thermoplastic elastomer (TPE) family designed for general purpose applications.

SEBS - ELASTRON G100.A30.B banner

ElastronSEBS - ELASTRON G100.A30.B

Tear Strength:17.0 - 17.0 kN/m
Strain at Break:800.0 - 800.0 %
Compression Set (70 °C):41.0 - 41.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

BTec™ BSI-8100-VP banner

Britec SolutionsBTec™ BSI-8100-VP

Functions:Foaming Agent
Processing Methods:Coextrusion, Structural Foam Molding, Extrusion, Cable Extrusion, Co-Injection Molding, Injection Molding, Rotational Molding
End Uses:Wires, Housings, Toys, Cables, Housewares, Automotive Interior Parts
Labeling Claims:Environmentally Friendly

BTec™ BSI-8100-VP is an exothermic CFA’s generate heat during the decomposition process, yield more volume of gas and higher gas pressure.

SEBS - ELASTRON G500.A75.N.PS banner

ElastronSEBS - ELASTRON G500.A75.N.PS

Tear Strength:36.0 - 36.0 kN/m
Strain at Break:600.0 - 600.0 %
Compression Set (70 °C):85.0 - 85.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PS.

SEBS - ELASTRON G400.A65.B banner

ElastronSEBS - ELASTRON G400.A65.B

Tear Strength:41.0 - 41.0 kN/m
Strain at Break:950.0 - 950.0 %
Compression Set (70 °C):44.0 - 44.0 %

A soft, black unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good abrasion resistance is required.

SEBS - ELASTRON G101.D46.B banner

ElastronSEBS - ELASTRON G101.D46.B

Tear Strength:84.0 - 84.0 kN/m
Strain at Break:550.0 - 550.0 %
Compression Set (70 °C):73.0 - 73.0 %

A hard, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON G100.A40.N banner

ElastronSEBS - ELASTRON G100.A40.N

Tear Strength:21.0 - 21.0 kN/m
Strain at Break:800.0 - 800.0 %
Compression Set (70 °C):43.0 - 43.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

Paychlor D-62 banner

Payal GroupPaychlor D-62

Chemical Family:Alkanes, Mineral Oils
Functions:Plasticizer
Compatible Polymers & Resins:Polyvinyl Chloride (PVC)
End Uses:Synthetic Leather, Automotive Applications, Flooring, Automotive Exterior Parts, Footwear, Medical/Healthcare Applications, Cables, Wires, Hoses, Pipes, Conveyors, Automotive Interior Parts

Paychlor D-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

SEBS - ELASTRON G500.A45.N.PS banner

ElastronSEBS - ELASTRON G500.A45.N.PS

Tear Strength:21.0 - 21.0 kN/m
Strain at Break:500.0 - 500.0 %
Compression Set (70 °C):80.0 - 80.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PS.

Paracril™ BJLT-M40 banner

Dynasol ElastomersParacril™ BJLT-M40

Applications:Equipment & Parts, Tires, Medical Devices & Assemblies
Product Families:Nitrile Rubbers, Specialty Elastomers
Chemical Family:Nitrile Rubbers
Polymer Name:Acrylonitrile Butadiene Rubber (NBR)
End Uses:Tires, Wires, Cables

Paracril BJLTM40 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Fujipoly Industries 7BN banner

Fujipoly IndustriesFujipoly Industries 7BN

Tensile Strength:7.35 - 7.35 MPa

Fujipoly Industries 7BN is for general use. It is made by extruding silicone rubber into a tube shape. The standard materials are roughly divided into two types, 7BN type (for general use) which has various standard dimensions.

SEBS - ELASTRON G101.A73.N banner

ElastronSEBS - ELASTRON G101.A73.N

Tear Strength:40.0 - 40.0 kN/m
Strain at Break:700.0 - 700.0 %
Compression Set (70 °C):51.0 - 51.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

BTec™ BSI-9100-AP banner

Britec SolutionsBTec™ BSI-9100-AP

Functions:Foaming Agent
Processing Methods:Coextrusion, Structural Foam Molding, Extrusion, Cable Extrusion, Co-Injection Molding, Injection Molding, Rotational Molding
End Uses:Wires, Housings, Toys, Cables, Housewares, Automotive Interior Parts
Labeling Claims:Environmentally Friendly

BTec™ BSI-9100-AP is an endothermic CFA’s chemicals that take heat out and typically produce much smaller cell structure creating improved processing, better physical properties and improved appearance.

SEBS - ELASTRON G301.A65.B banner

ElastronSEBS - ELASTRON G301.A65.B

Tear Strength:30.0 - 30.0 kN/m
Strain at Break:800.0 - 800.0 %
Compression Set (70 °C):46.0 - 46.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

Show

of 653 results