Products in Automotive & Transportation: Marine Applications

Neoplast™ 180 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Envir® PA66G33HL-BK0101 is a 33% Glass fiber reinforced Nylon 66 molding resin, it is Heat stabilized and hydrolysis resistant. 66G33HL is optimized for properties and processibility. It is provided Black in color.

Rigid Thermoplastic Polyurethane (TPU)

PAR Group Nylon 66 Flame Retardant Sheet has mechanical properties similar to that of nylon 6 but with added flame retardancy. It fulfills the requirement of EN 45545-2 which is a standard specific to fire protection on railway vehicles.

Neoplast™ 163 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Tovo Gomma FKM 6000 is a rubber composite with the trade name butyl sheet 60 ShA3.

VITROFLEX TRANSPARENT MCM506NN is the acrylic pouring plate with transparent colors that allow vision through.

Neoplast™ 145 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

FB 1001 is a Flurolastomer with aramid. 0.125" ; 1 Ply Aramid Fluoroelastomer Belt [Press Cured].

Z93B is a Copolymer of acrylonitrile and butadiene with a medium ACN content of 30 - 45%.HNBR materials typically provide superior heat resistance, excellent mechanical properties, combined with exceptional resistance to oils, hydrogen sulfide, amines present in crude oil, high energy radiation, ozone and weathering.Z93B is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 2 (NES 337) for use on naval ships and submarines.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent chemical resistance Excellent wear resistance and mechanical properties Accepted by M.O.D. to Def. Stan. NES 337 Meets ASTM D2000/SAE J200 line call-out M4DH716, A26, B36, EO16, EO36, F17. Typical Applications Naval ships and submarines Oilfield applications

FBT 1001 is a FKM With PTFE Film and wire mesh. 3.54mm”; Single Ply Wire EPDM Belt

Seaboard® StreamLite™ W01-06245 is a light-density expanded PVC sheet product designed for economical wood or metal replacement. The materials are lead and heavy metal free, which allows them to optimize performance while being more environmentally friendly. StreamLite PVC is ideal for practical light duty applications. Its smaller cell structure enables suitable screw and staple retention. The product is UV protected for long-term material performance.

Epsotech PE HA1 NC is a single layer high density Polyethylene product. It is specially formulated and manufactured for fabrication applications.

Ilkalem AS P-192 TA is ortho unsaturated polyester resin for GRP applications.

RE-FLEX® 780AJLM is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

Ilkalem AS IR-100T is ISO thixotropic unsaturated polyester resin for GRP applications.

Tovo Gomma CR 3300 60 is a rubber compound which has a trade name flame resistant chloroprene sheet 6.

Densetec® Post Consumer is a 98% (2% color) post consumer product that can be used in a variety of applications. Densetec® Post Consumer is manufactured using a HDPE resin that has been compounded and processed from products such as detergent bottles and/or milk jugs that have been saved from our nation's land fills. Densetec® Post Consumer is Polymer Industries contribution to the “Green Movement” and can be produced for a minimum run, per color, per thickness. Densetec® Post Consumer is manufactured in sheet form or can be fabricated to customer requirements, and can be used to produce products such as Marine Board, Playground Board, Sign Board and Partition Board. Densetec® Post Consumer exhibits virtually the same properties as those of standard HDPE. It is easily fabricated, routed or engraved using current CNC technology. This material can be produced with or without a textured surface. It can be produced using any of Polymer's many stock colors and can be produced with a UV stabilizer making it the perfect choice for outdoor environments. It is an excellent replacement for wood, and because the color is embedded in the sheet, it never needs painting and is also vandal resistant. The versatile properties of Densetec® Post Consumer make it the ideal product for any application that standard HDPE can be used. Polymer Industries has committed considerable resources to the environmental reclamation of HDPE and the development of a product that does not sacrifice the integrity of the application in which it is used. We are proud to be able to offer to our customers and to these industries our “Green ” offering of Densetec® Post Consumer.

High Flow Nylon 66 (Polyamide 66)

Nylon 66 (Polyamide 66)

ebalta AH 140 is a very thin liquid two-component-epoxy resin with high values of strength and high heat resistance. Due to its very good impregnating and wetting properties it is suitable as laminating resin for high-strength components with fabrics of glass –or carbon fiber. Especially for thin laminates, a post-curing of 16 hours at 80°C, after curing at room temperature, is essential in order to guarantee a complete curing. Otherwise the non post-cured laminate will be brittle and the adhesion of the layers with each other will not be sufficient.

PROlen 6000 Color PE 1000 -UHMW- additionally UV-stabilized, resulting in high lightfastness

Thermo-Cor™ FR 5.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.

Nylon 66 (Polyamide 66)

Broadway Colors Brown-BGS 006 has its typical applications in general purpose, small to medium parts.

V76F is a peroxide-cured tetrapolymer (70% fluorine) formulated for high performance sealing applications in today's aggressive industrial environments.V76F has been developed to provide outstanding resistance to solvents, fuels, hot water and steam (above 150°C/302°F).V76F also offers superior resistance to acids, oils, coolants and hydraulic fluids, making it ideal for use in fuel systems, chemical processing equipment and certain critical diesel engine locations.Alternative to lead-containing (litharge-cured) steam resistant grades.Key Attributes Excellent resistance to fuels and solvents Excellent resistance to oils, steam/water and hydraulic fluids High temperature performance Superior long-term sealing performance Typical Applications Marine diesel engines (e.g. fuel systems, cooling ports) Biofuel processing equipment Heat exchangers Paper/pulp processing equipment Hot water/steam systems

Thermo-Cor™ FR 7.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.

Hypalon® CSM Rubber Sheet is to be considered an improved chloroprene as it offers better chemical resistance, ozone and light resistance, heat aging. Their particular resistance to weathering conditions and the excellent low gas permeability presents CSM as the best option for the manufacture of premium quality inflatable boats and structures for all environments, but most of all in sea environment.

SPIRATAC® 100 is a treated fiber for improved processing of spiral and knitted packages. Available on our full line of industrial fibers.

RE-FLEX® 470A is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

National Aerospace Supply NA 250R is a unique orange release film for use in the food, medical, and industrial markets. This film has excellent heat and puncture resistance as well as great tear resistance.

V75J is a peroxide-cured terpolymer formulated for high performance sealing applications in today's aggressive industrial environments.V75J has been developed to provide outstanding resistance to hot water and steam (above 150°C/302°F) without the use of litharge (lead oxide) curatives.V75J also offers superior resistance to acids, oils, coolants and hydraulic fluids, making it ideal for use in chemical processing equipment and certain critical diesel engine locations.Key Attributes Excellent resistance to hot water and steam Excellent resistance to oils, fuels and hydraulic fluids High temperature performance Superior long-term sealing performance Typical Applications Marine diesel engines (valve seats & liner rings) Heat exchangers Paper/pulp processing equipment Hot water/steam systems

PROlen black and multicolored has good mechanical properties and good gliding properties.

Zor-Pac™ Shrink Film - 32′ X 100′ 7 Mil White is designed to withstand all of the rigors of domestic shipments, providing complete protection for such shipments as well as providing outside storage protection.

Homopolymer Polypropylene (PP)

PC CAT® NP 99 is a polyurethane catalyst.