Products in Automotive & Transportation: Caps

631 Products found in Automotive & Transportation

Browse Applications

Automotive

Other Automotive & Transportation Applications

Transportation

Lubricants & Functional Fluids

Coatings & Finishes

Bonding & Assembly

Automotive

Other Automotive & Transportation Applications

Transportation

Lubricants & Functional Fluids

Coatings & Finishes

Bonding & Assembly

Braskem AmericaBraskem Inspire 6025N

Polymer Name:Polypropylene Homopolymer (HPP)
Processing Methods:Thermoforming, Stretch Films Extrusion, Compounding, Film Extrusion, Extrusion
Additives Included:Nucleating Agent
Melt Flow Index:2.5 - 2.5 g/10 min

Braskem INSPIRE 6025N Polypropylene Homopolymer (HPP) high performance resin is a high crystalline nucleated homopolymer with exceptional stiffness and good optical properties.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Wacker Chemie AGELASTOSIL® R 863/65 MH

Polymer Name:Silicone Elastomer
Processing Methods:Extrusion, Calendering
End Uses:Caps, Closures, Hoses
Features:Low Compression Set, Non Stick, Coolant Resistant, Heat Stabilized, Dimensional Stability, Good Green Strength, High Consistency
Tear Strength:20.0 - 20.0 kN/m

ELASTOSIL® R 863/65 MH is a peroxide-curing silicone rubber known for its exceptional green strength, which greatly improves calendering and extrusion performance. When uncured, the extruded hoses made from this silicone rubber exhibit high dimensional stability and a non-sticky surface. ELASTOSIL® R 863/65 is specifically formulated as a high green-strength peroxide-curing silicone rubber. It is recommended to add heat stabilizers when operating at service temperatures exceeding 180 °C.

SABIC's Specialties BusinessNORYL™ Resin PX9406P

Polymer Name:PPO/PS Alloy
Processing Methods:Injection Molding
Density:1100.0 - 1100.0 kg/m³
Flexural Modulus:2500.0 - 2500.0 MPa

SABIC's Specialties Business NORYL PX9406P resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2.5mm and V0 at 0.75mm. NORYL PX9406P is VDE certified IEC60335 and offers strong electrical performance at thin wall, high heat resistance, Low Warpage, low moisture absorption, and dimensional stability. This material is an excellent candidate for unattended appliance applications such as printed circuit board (PCB) holders, terminal blocks + connectors, circuit protection / relay / switches, motor end caps, control box / panels, and battery charger / fuse holders where VDE IEC60335 is required. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

EnvaliorAkulon® Ultraflow K-FHG12

Polymer Name:Polyamide 6 (PA 6)
Chemical Family:Polyamides
Reinforcement Material:Glass Fibers
Additives Included:Heat Stabilizer
Fillers Included:Glass Fiber
Processing Methods:Injection Molding

Akulon® Ultraflow K-FHG12 is a high-performance polyamide 6 and polyamide 66 material trusted worldwide for applications in automotive, electronics, electrical, furniture, and packaging. In molded parts, it strikes an impressive equilibrium between design simplicity and processing ease, delivering exceptional mechanical properties across a wide temperature range and diverse conditions. Meanwhile, for extrusion, it establishes industry benchmarks with its outstanding strength, resilience, and ease of processing. Injection molding is the preferred technology, and notable features encompass 60% glass reinforcement, heat stabilization, and high flow characteristics.

EnvaliorAkulon® Ultraflow K-FHG0

Polymer Name:Polyamide 6 (PA 6)
Chemical Family:Polyamides
Reinforcement Material:Glass Fibers
Additives Included:Heat Stabilizer
Fillers Included:Glass Fiber
Processing Methods:Injection Molding

Akulon® Ultraflow K-FHG0 is a high-performance polyamide 6 and polyamide 66 material trusted by customers worldwide for automotive, electronics, electrical, furniture, and packaging applications. In molded parts, it achieves an excellent balance between design simplicity and processing ease, delivering impressive mechanical properties across a wide temperature range and diverse conditions. For extrusion, it establishes industry standards with its exceptional strength, resilience, and ease of processing. Injection molding is the preferred processing technology, and notable features include 50% glass reinforcement, heat stabilization, and high flow capabilities.

EnvaliorAkulon® S223-HG6

Polymer Name:Polyamide Copolymer, Polyamide 66 (PA 66)
Chemical Family:Polyamides
Reinforcement Material:Glass Fibers
Additives Included:Heat Stabilizer
Fillers Included:Glass Fiber
Processing Methods:Injection Molding

Akulon® S223-HG6 is a high-performance material that combines the attributes of polyamide 6 and polyamide 66. It is widely utilized by customers worldwide in various applications, including automotive, electronics, electrical, furniture, and packaging. In molded parts, this material excels in providing an excellent balance between ease of design and processing, all while delivering outstanding mechanical properties over a wide temperature range and under diverse conditions.

EnvaliorArnitel® EL550-08

Polymer Name:Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods:Injection Molding
End Uses:Caps, Closures, Pump Parts
Density:1200.0 - 1200.0 kg/m³
Strain at Break:640.0 - 640.0 %

Arnitel® EL550-08 is a high-performance thermoplastic copolyester (TPC) with exceptional flexibility, high temperature resistance, and strength. This innovative material provides excellent processing characteristics and serves as a lighter, smarter, and greener alternative to conventional rubbers, particularly in automotive and E&E industries. This leads to reduced environmental impact and system costs. Arnitel® EL550-08 is suitable for injection molding processes and meets food contact quality standards.

EnvaliorArnitel® EL550

Polymer Name:Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods:Extrusion, Injection Molding
End Uses:Pump Parts, Plyers, Support Springs, Couplings, Closures, Screw Drivers, Virtual Reality, Caps, Insecticide Bottle Plug
Density:1200.0 - 1200.0 kg/m³
Strain at Break:640.0 - 640.0 %

Arnitel® EL550 is a high-performance thermoplastic copolyester (TPC) known for its flexibility, exceptional temperature resistance, strength, and excellent processing characteristics. This material is a sustainable alternative to conventional rubbers, particularly in automotive and E&E industries, reducing environmental impact and system costs. Arnitel® EL550 can be processed through extrusion and injection molding techniques, meets food contact quality standards, and is suitable for film extrusion.

Nylon Corporation of America (NYCOA)NYCOSIX 436

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding
Flexural Modulus:2652.65 - 2652.65 MPa

NYCO6 436 Nylon is general-purpose low viscosity injection-molding grade Nylon 6 that exhibits excellent melt fluidity, good toughness, stiffness, and strength.

IMPRAMER™ C 1139 Chlorobutyl Rubber metal container 1,08 banner

SIBURIMPRAMER™ C 1139 Chlorobutyl Rubber metal container 1,08

Polymer Name:Chlorobutyl Rubber
End Uses:Closures, Profiles, Belts & Belt Repair, Hoses, Caps, Tires
Features:Highly Versatile, Low Air Permeability, High Reactivity, Heat Resistance, Good Weather Stability, High Elasticity, Chemical Resistant, Ozone Resistant

IMPRAMER™ C 1139 chlorobutyl rubber is a chlorinated copolymer of isobutylene and isoprene. Product is offered as white to light amber color bale and has 0.92 as typical specific gravity.

Partners in ChemicalsOMNISTAB® AN 168

Chemical Family:Phosphite Ester
Functions:Antioxidant, Secondary Antioxidant, Stabilizer
Compatible Polymers & Resins:Thermoplastic Elastomers (TPE), Ethylene Vinyl Acetate (EVA), Styrene Ethylene Butylene Styrene (SEBS), Polybutadienes, Polyethylene Terephthalate (PET), Polycarbonates (PC), Polyamides, Polypropylenes (PP), Polyethylene Terephthalate Glycol (PETG), Polyethylenes (PE), Polyolefins, Styrene Butadiene Styrene (SBS), Linear Low Density Polyethylene (LLDPE) , High-Density Polyethylene (HDPE)
Physical Form:Granules, Solid, Powder
Synonyms:2,4-Bis(1,1-dimethylethyl)phenol phosphite, Tri(2,4-di-t-butylphenyl) phosphite, Tri(2,4-di-tert-butylphenyl) phosphite, Tri(2,4-tert-butylphenyl) phosphite, Tris [2,4-di-tert-butylphenyl] phosphite, Tris(2,4-di-t-butylphenyl)phosphite, Tris(2,4-di-tert-butylphenoxy)phosphine, Tris(2,4-di-tert-butylphenyl) phosphite, Tris(2,4-di-tert-butyphenyl) phosphite, Tris(2,4-tert-butylphenyl) phosphite

OMNISTAB® AN 168 is a hydrolytically stable phosphite processing stabilizer. Also acts as an antioxidant.

IMPRAMER™ B 2247 Bromobutyl Rubber metal container 1,08 banner

SIBURIMPRAMER™ B 2247 Bromobutyl Rubber metal container 1,08

Polymer Name:Bromobutyl Rubber (BIIR)
End Uses:Closures, Profiles, Belts & Belt Repair, Hoses, Caps, Tires
Features:Highly Versatile, Low Air Permeability, High Reactivity, Heat Resistance, Good Weather Stability, High Elasticity, Chemical Resistant, Brominated, Ozone Resistant

IMPRAMER™ B 2247 bromobutyl rubber is a brominated copolymer of isobutylene and isoprene. Product is offered as white to light amber color bale and has 0.93 as typical specific gravity.

Valtris Specialty Chemicals CompanyCereplas™ DIDS LE

Chemical Family:Esters
Fluids & Lubricants Type:Engine Oils & Fluids

Cereplas™ DIDS LE is a plasticizer produced by the esterification of isodecyl alcohol with sebacic acid. It is a clear, nearly colorless, and odorless liquid, miscible with inert organic solvents but immiscible with water. With high thermal and oxidation stability, it is used in PVC, rubber, and synthetic engine oils. It offers efficient plasticization, low volatility, and excellent low-temperature performance, making it suitable for electrical insulation and high-frequency cable sheathing.

Nylon Corporation of America (NYCOA)NYCOSIX 438

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding
Additives Included:Nucleating Agent, Lubricant (Unspecified)
Flexural Modulus:2652.65 - 2652.65 MPa

NYCO6 438 Nylon is general-purpose low viscosity injection-molding grade Nylon 6 that exhibits excellent melt fluidity, good toughness, stiffness, and strength.

Partners in ChemicalsOMNISTAB® AN 1010

Chemical Family:Phenols & Phenolics
Functions:Primary Antioxidant, Antioxidant
Compatible Polymers & Resins:Ethylene Propylene Rubber (EPM), Polyoxymethylene (POM), Polyamides, Polypropylenes (PP), Polyethylenes (PE), Polyvinyl Chloride (PVC), Polyolefins, Acrylonitrile Butadiene Styrene (ABS), Polyurethanes (PU), Ethylene Vinyl Acetate (EVA), Styrene Ethylene Butylene Styrene (SEBS), Ethylene Propylene Diene Monomer (EPDM)
Synonyms:Carbyltetramethylene tetrakis(3,5-di-tert-butyl-4-hydroxyhydrocinnamate), Neopentanetetrayl 3,5-di-tert-butyl-4-hydroxyhydrocinnamate, Pentaerythritol 3-(4-hydroxy-3,5-di-tert-butylphenyl)propionate, Pentaerythritol 4-hydroxy-3,5-di-tert-butylphenylpropionate, Pentaerythritol tetra [β-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate], Pentaerythritol tetra[3-(3′,5′-di-tert-butyl-4′-hydroxyphenyl)propanoate], Pentaerythritol tetra[β-(3′,5′-di-tert-butyl-4′-hydroxyphenyl)propionate], Pentaerythritol tetrakis (3-(3′,5′-di-t ert-butyl-4-hydroxyphenyl)propionate), Pentaerythritol tetrakis ester with 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionic acid, Pentaerythritol tetrakis(3,5-di-tert-butyl-4-hydroxyhydrocinnamate), Pentaerythritol tetrakis(3,5-tert-butyl-4-hydroxyhydrocinnamate), Pentaerythritol tetrakis(4-hydroxy-3,5-di-tert-butyl)hydrocinnamate, Pentaerythritol tetrakis[(3,5-di-tert-butyl-4-hydroxyphenyl)propionate], Pentaerythritol tetrakis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propanoate], Pentaerythritol tetrakis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate], Pentaerythritol tetrakis[3-(4-hydroxy-3,5-di-tert-butylphenyl)propionate], Pentaerythritol tetrakis[3-[3,5-bis(1,1-dimethylethyl)-4-hydroxyphenyl]]propionate, Pentaerythritol tetrakis[β-(3,5-di-tert-butyl-4-hydroxyphenyl)propanoate, Pentaerythritol tetrakis[β-(3,5-di-tert-butyl-4-hydroxyphenyl)propanoate], Pentaerythritol tetrakis[β-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate], Pentaerythritol tetrakis[β-(4-hydroxy-3,5-di-tert-butylphenyl)propionate], Pentaerythrityl tetra-β-(3,5-di-tert-butyl-4-hydroxyphenyl) propionate, Pentaerythrityl tetrakis(3,5-di-tert-butyl-4-hydroxy-phenyl)propionate, Pentaerythrityl tetrakis(4-hydroxy-3,5-di-tert-butylphenylpropionate), Pentaerythrityl tetrakis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate], Pentaerythrityl tetrakis[3-(3′,5′-di-tert-butyl-4′-hydroxyphenyl)propionate], Pentaerythrityl tetrakis[β-(4-hydroxy-3,5-di-tert-butylphenyl)propionate], Pentaerythrityl β-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate, Pentaerytrityl tetrakis(3,5-di-tert-butyl-4-hydroxyphenyl)propionate, Tetra[β-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate]pentaerythritol, Tetrakis(3,5-di-tert-butyl-4-hydroxyhydrocinnamoyloxymethyl)methane, Tetrakis(hydroxymethyl)methane tetrakis[β-{3,5-di(tert-butyl)-4-hydroxyphenyl}propionate], Tetrakis[[[β-(3,5-di-tert-butyl-4-hydroxyphenyl)propionyl]oxy]methyl]methane, Tetrakis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionyloxymethyl]methane, Tetrakis[3-(4-hydroxy-3,5-di-tert-butylphenyl)propionyloxymethyl]methane, Tetrakis[methylene-3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate]methane, Tetrakis[methylene-3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionato]methane, Tetrakis[methylene-3-(3′,5′-di-tert-butyl-4-hydroxyphenyl)propionate]methane, Tetrakis[methylene-3-(3′,5′-di-tert-butyl-4′-hydroxyphenyl)propionate]methane, Tetrakis[methylene-3-(3′,5′-di-tert-butyl-4′-hydroxyphenyl)propionato]methane, Tetrakis[methylene(3,5-di-tert-butyl-4-hydroxyhydrocinnamate)]methane, Tetrakis[methylene(3,5-di-tert-butyl-4-hydroxyhydrocinnamoyloxy)methane, Tetrakis[β-(3,5-di-tert-butyl-4-hydroxyphenyl)propionic acid]pentaerythritol ester

OMNISTAB® AN 1010 is a pentaerythritol tetrakis[3-[3,5-di-tert-butyl-4-hydroxyphenyl]propionate. It is a sterically hindered phenolic primary antioxidant.

Valtris Specialty Chemicals CompanyCereplas™ L8TM LE

Chemical Family:Esters

Cereplas™ L8TM LE is a plasticizer produced by the esterification of linear octanol with trimellitic anhydride. It is a pale yellow, nearly odorless liquid, miscible with inert organic solvents but immiscible with water. With higher purity and lower alcohol content than Cereplas™ L8TM, it provides low-temperature flexibility in flexible PVC applications. Its minimal migration ensures long service life, making it suitable for automotive interior trim and lubricant formulations.

Valtris Specialty Chemicals CompanyCereplas™ HN

Chemical Family:Esters

Cereplas™ HN is a mixed ester used as a plasticizer or base ester in functional fluids. It is a clear liquid, miscible with inert organic solvents but immiscible with water. Applicable in automotive, construction, consumer goods, and healthcare industries, it is used in automotive components, cables, flooring, packaging, and textiles. It serves as a base stock in lubricants and functional fluids, offering versatility across multiple applications.

IMPRAMER™ B 2232 Bromobutyl Rubber metal container 1,08 banner

SIBURIMPRAMER™ B 2232 Bromobutyl Rubber metal container 1,08

Polymer Name:Bromobutyl Rubber (BIIR)
End Uses:Closures, Curing Envelope, Profiles, Tubeless Tires, Belts & Belt Repair, Hoses, Caps, Tires
Features:Highly Versatile, Low Air Permeability, High Reactivity, Heat Resistance, Good Weather Stability, High Elasticity, Chemical Resistant, Brominated, Ozone Resistant

IMPRAMER™ B 2232 bromobutyl rubber is a brominated copolymer of isobutylene and isoprene. Product is offered as white to light amber color bale and has 0.93 as typical specific gravity.

ELIX Polymers, S.L.Elix™ ABS P3H-AT

Polymer Name:Acrylonitrile Butadiene Styrene (ABS)
Processing Methods:Injection Molding
Additives Included:Anti-Static Agent
Melt Flow Index:4.0 - 4.0 g/10 min

Improved chemical and dynamic resistance, high gloss, contains antistatic additive. Benefits: Chemical resistance; Dynamic loading. Typical Applications: Lawnmowers; Dishwasher panel; Lids for electrical accumulators, power sets.

Plastic Technology Services PTSCPH7-G130 banner

Plastic Technology ServicesPlastic Technology Services PTSCPH7-G130

Polymer Name:Polypropylene (unspecified)
Processing Methods:Injection Molding

PTSCPH7-G130 is a thermoplastic polymer, made by the chemical industry and used in a wide variety of applications, including packaging, ropes, textiles, stationery, plastic parts and reusable containers of various types, laboratory equipment, loudspeakers, automotive components, and polymer banknotes.

ElastronTPV - ELASTRON V201.A56.N

Density:970.0 - 970.0 kg/m³
Tear Strength:20.0 - 20.0 kN/m
Compression Set (70 °C):27.0 - 27.0 %

A soft, colorable thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family which offers higher temperature resistance and excellent compression set with superior UV resistance.

ElastronSEBS - ELASTRON G510.A80.B.ABS

Tear Strength:30.0 - 30.0 kN/m
Strain at Break:400.0 - 400.0 %
Compression Set (70 °C):67.0 - 67.0 %

A soft, black SEBS based thermoplastic elastomer with superior UV resistance (TPE) compound specially designed for excellent adhesion to ABS/PC/PMMA/SAN/ASA/PET and PET-G.

ElastronSEBS - ELASTRON G301.A75.N

Tear Strength:36.0 - 36.0 kN/m
Strain at Break:750.0 - 750.0 %
Compression Set (70 °C):48.0 - 48.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

ElastronTPV - ELASTRON V101.A65.N

Density:970.0 - 970.0 kg/m³
Tear Strength:29.0 - 29.0 kN/m
Compression Set (70 °C):37.0 - 37.0 %

A soft, colorable thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer family that offers good physical properties and chemical resistance.

ElastronSEBS - ELASTRON G401.A65.B

Tear Strength:39.0 - 39.0 kN/m
Strain at Break:1000.0 - 1000.0 %
Compression Set (70 °C):39.0 - 39.0 %

A soft, black unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good scratch and abrasion resistance is required.

Plastic Technology Services PTSHPH5-G130 banner

Plastic Technology ServicesPlastic Technology Services PTSHPH5-G130

Polymer Name:Polypropylene (unspecified)
Processing Methods:Injection Molding

PTSHPH5-G130 is a thermoplastic polymer, made by the chemical industry and used in a wide variety of applications, including packaging, ropes, textiles, stationery, plastic parts and reusable containers of various types, laboratory equipment, loudspeakers, automotive components, and polymer banknotes.

Osterman & Company Inc.EPITEC® PC-910FH

Polymer Name:Polycarbonate (PC)
Processing Methods:Injection Molding, Compounding
Flexural Modulus:2413.16 - 2413.16 MPa

EPITEC® PC-910FH by Osterman & Company Inc. is comprised of Polycarbonate. It is commonly used

ElastronSEBS - ELASTRON G500.A55.B.PA

Tear Strength:23.0 - 23.0 kN/m
Strain at Break:400.0 - 400.0 %
Compression Set (70 °C):39.0 - 39.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PA.

Sri Vasavi Pigments ANTIMICROBIAL MB 03SV 91A003 AM (SQ 3287) banner

Sri Vasavi PigmentsSri Vasavi Pigments ANTIMICROBIAL MB 03SV 91A003 AM (SQ 3287)

Functions:Anti-Microbial Agent
Carrier:Polyethylenes (PE), Resin-based
Features:Food Contact Acceptable
End Uses:Cosmetic Packaging, Electrical/Electronic Applications, Pharmaceutical Packaging, Covers, Automotive Exterior Parts, Caps, Automotive Interior Trim, Automotive Interior Parts, Trays, Automotive Components, Floor Mats, Tanks

ANTIMICROBIAL MB 03SV 91A003 AM (SQ 3287) is used for Water Storage Tanks, ABS Components, Mobile Panels,Electronic Devices.

ElastronTPV - ELASTRON V100.A65.B

Density:960.0 - 960.0 kg/m³
Tear Strength:24.0 - 24.0 kN/m
Compression Set (70 °C):38.0 - 38.0 %

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family designed for injection applications.

PENTAC Polymer GmbHPentamid™ A S GV30 H FR natural

Polymer Name:Polyamide 66 (PA 66)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber
Additives Included:Flame Retardant, Heat Stabilizer

Pentamid A S GV30 H FR natural is a low viscosity, heat stabilized polyamide 66, 30% glass fiber reinforced, flame retardant.

Ovation PolymersNemcon™ H PA66 DP187

Polymer Name:Polyamide 66 (PA 66)
Processing Methods:Injection Molding
Flexural Modulus:7400.0 - 7400.0 MPa

Thermally conductive Nylon 6,6.

PENTAC Polymer GmbHPentamid™ B H TF25 natural

Polymer Name:Polyamide 6 (PA 6)
Processing Methods:Injection Molding
Additives Included:Heat Stabilizer, Lubricant (Unspecified)

Normal viscosity polyamide 6, modified with 25% PTFE

Resinoid Engineering Corporation Resinoid Compound 2002-4A banner

Resinoid Engineering CorporationResinoid Engineering Corporation Resinoid Compound 2002-4A

Functions:Molding Compound
Reinforcement Material:Other Reinforcement Material
Processing Methods:Transfer Molding, Compression Molding
End Uses:Caps, Bearings, Bushings, Military Applications, Gears, Conduit, Closures, Handles

Resinoid 2002-4A is a fabric reinforced, two-step phenolic molding compound. It has been modified to meet gear requirements and other stressed applications. It possesses excellent impact and flexural strength. It is available in bulk form and is recommended for compression or transfer molding.