Products in Automotive & Transportation: Automotive Exterior Parts

MOCOM Compounds ALTECH® PA66 A 2030/109 GF30 is a heat stabilized, easy release and easy flow polyamide 66 with a 30% glass fiber filler/additive system. It has pre-drying conditions of 80°C in a dry air (dessiccant) dryer for 2-12 h depending on moisture content, with a maximum moisture content of <0.15%. The processing injection molding melt temperature is 280-300°C, and the mold temperature is 80-120°C. This market segment is for automotive use, and is typically used for applications such as housings and different automotive powertrain parts. It must be stored in a cool and dark environment, not exceeding 30°C.

MOCOM Compounds ALTECH® PA66 A 2030/500 HR GF30 BK0002-00 is a polyamide 66 with 30% glass fibers for injection molding grade. It boasts features such as high heat stabilization, hot oil resistance, good hydrolysis resistance, glycol resistance, and easy release (demolding). It is suitable for automotive, machinery, electrical and electronic applications, such as injection molded parts, interior decorations/finishing, exterior parts, and different automotive powertrain parts. For optimal processing results, injection molding should be done with a melt temperature of 280-300°C and a mold temperature of 80-120°C.

MOCOM Compounds ALTECH® PA66 A 2015/510 GF15 IM is a polyamide 66 material with 15% glass fibers that has been high heat stabilized, UV stabilized, and impact modified. It is primarily used for injection molded parts in the automotive, building, and construction markets, such as housings and interior/exterior decorations. For injection molding, melt temperature should be between 280-300°C and the mold temperature should be between 80-120°C. Additionally, the material should be stored in a dry, protected place away from light, at temperatures not exceeding 30°C.

MOCOM Compounds ALTECH® PA6 A 3230/100 GF10 GB20 is a heat-stabilized, easy-flow, easy-release (demolding) and fast-solidifying polyamide 6-based compound with a filler/additive system of 20% glass beads and 10% glass fibers. It is suitable for exterior parts and injection-molded parts and is commonly used in automotive, building, and construction applications for functional components and housings.

MOCOM Compounds ALTECH® PA6 A 4230/540 MR20 GF10 FR is a polyamide 6 injection molding grade featuring a base polymer of polyamide 6, a 30% glass fiber/mineral filler/additive system, flame retardant, heat stabilized, low warpage, and halogen-free flame retardant. This grade is suitable for use in the Automotive, electrical, and electronic markets, with typical applications including functional components, housings, lamp covers, electrical and electronic (E&E) components, exterior parts, and interior decoration/finishing. Injection molding should be done with a melt temperature of 270-290°C and a mold temperature of 80-100°C.

MOCOM Compounds ALTECH® PA6 A 2030/109 GF30 is a Polyamide 6 polymer with 30% glass fibers heat stabilized and easy release (demolding) filler/additive system. It is suitable for injection molding with a melt temperature of 270-290°C and a mold temperature of 80-100°C. This material is suitable for multiple market segments, such as automotive, machinery, building and construction, and is typically used for injection molded parts, exterior parts, interior decoration/finishing, engine and drive systems. To ensure its optimum performance, it should be stored in a cool, dry place, and not exposed to temperatures above 30°C.

MOCOM Compounds ALTECH® PA6 A 2010/100 GF10 is a heat-stabilized, fast-solidifying, easy-release (demolding) and processing-stabilized, nucleated polyamide 6 with 10% glass fibers, designed for applications such as injection-molded parts, functional components, interior decoration/finishing, and exterior parts. It should be pre-dried at 80°C in a dry air (desiccant) dryer for 2-12 hours, depending on moisture content, with a maximum moisture content of <0.15%. It should be processed with injection molding at a melt temperature of 270-290°C and a mold temperature of 80-100°C. It is suitable for market segments such as automotive, building, and construction.

MOCOM Compounds ALTECH® PA6 A 1000/310 IM is a polyamide 6 base polymer with special features including high impact modified, low temperature impact modified, heat stabilized, and easy release (demolding) properties. It is suitable for injection molding with a melt temperature of 250-270°C and a mold temperature of 40-80°C. This polymer is suitable for a variety of applications including automotive, building and construction, and furniture, such as housings, different automotive powertrain parts, and functional components. It should be stored in a dry, light-protected environment not exceeding 30°C and kept away from high temperatures and direct sunlight.

MOCOM Compounds ALTECH® PA6 A 2035/109 GF35 is a polyamide 6 based polymer with a 35% glass fiber filler/additive system that is heat stabilized, easy to release (demold) and processing stabilized. Common market segments utilizing this material include automotive, electrical and electronic, and building and construction. Typical applications include functional components, automotive powertrain parts, fans, housings, and electrical components.

MOCOM Compounds ALTECH® PA6 A 2030/516.01 GF30 IM is a polyamide 6 with 30% glass fibers filler/additive system. It is suitable for injection molding with melt temperatures of 270-290°C and mold temperatures of 80-100°C. It has easy release (demolding), impact modified, injection molding grade, heat stabilized, nucleated and processing stabilized special features. It is typically used in automotive, electrical, and electronic markets for exterior parts, interior decoration/finishing, and electrical components applications such as housings, functional components, and plugs/connectors. Pre-drying conditions should be 80°C in a dry air (dessiccant) dryer for 2-12 hours, depending on the moisture content, with a maximum moisture content of 0.15%.

MOCOM Compounds ALTECH® PA6 A 2015/310 GF15 IM is a Polyamide 6 base polymer, impact modified, heat stabilized, injection molding grade, and nucleated with 15% glass fiber filler/additive system and processing stabilized. For processing injection molding, the melt temperature should be between 270-290°C and mold temperature between 80-100°C. Typical applications include housings, operating elements, impact protection/shock absorbers, and functional components. This product is suitable for the Machinery, Electrical and Electronic, and Automotive market segments. It should be stored in a dry and light-protected environment, not above 30°C, to ensure its optimal performance.

MOCOM Compounds ALTECH® PA6 A 4030/100 MR30 is a polyamide 6-based polymer with a 30% mineral filler/additive system. It has low warpage, is processing and heat stabilized, and is suitable for automotive, sport, and leisure applications such as exterior parts, interior decoration/finishing, and injection molded parts, housings, and functional components.

MOCOM Compounds ALCOM® MS PA66+6I/X 2030 UV 18054 is a high-performance engineering polymer designed for injection molding applications in the automotive market segment. This product is based on a partially aromatic polyamide and reinforced with glass fibers, making it an ideal choice for producing exterior parts and interior decorations with improved surface appearance.

MOCOM Compounds ALTECH® PA6 A 2040/100 GF40 is a high-heat stabilized, easy-release, easy-flow, and processing-stabilized polyamide 6 reinforced with 40% glass fibers. The recommended melt temperature for injection molding is between 270-290°C, while the mold temperature should be between 80-100°C. This product is primarily used in the automotive, machinery, electrical, and electronic market segments, and is suitable for making housings, functional components, operating elements, and injection molded parts for interior decoration/finishing, exterior parts, and electrical components.

MOCOM Compounds ALTECH® PA66 A 1000/510 IM is a polyamide 66, impact-modified and heat-stabilized base polymer used for various applications such as injection-molded parts, interior decoration/finishing, and exterior parts. Pre-drying conditions should be 80°C in a dry air (dessiccant) dryer for 2-12 hours depending on moisture content, with a maximum moisture content of <0.15%. Processing injection molding requires a melt temperature of 270-290°C and a mold temperature of 40-80°C. It should be stored in a dark place at temperatures not exceeding 30°C.

MOCOM Compounds ALTECH® PA6 A 2030/326 GF30 UV is a UV stabilized, processing stabilized, and nucleated Polyamide 6 with 30% glass fibers. It is suitable for injection molded parts, electrical components, exterior parts, and interior decoration/finishing applications in the Automotive, Machinery, Building, and Construction, and Sport and Leisure market segments. Pre-drying conditions should be 80°C in a dry air (desiccant) dryer for 2-12 hours, depending on moisture content, with a maximum moisture content of 0.15%. Processing parameters include a melt temperature of 270-290°C and a mold temperature of 80-100°C. It should be stored dry and protected from light, not above 30°C.

Advanced Composites ADX-2349 is a mineral-filled thermoplastic olefin compound designed for an excellent balance of stiffness and impact. It is high-flowing, ductile at low temperatures, has a low CLTE, and is suitable for use in painted exterior applications. Its features include high flow, high stiffness, and high impact resistance.

Advanced Composites ADX-2341 is a mineral-filled thermoplastic olefin compound designed for high-stiffness applications. This compound is ductile at low temperatures and is suitable for use in painted exterior applications. Its applications include exterior parts and liftgates, making it a versatile choice for various automotive applications.

Oplas® Green 533 (Solvent Green 3) is a dyestuff particularly suitable for the coloring of transparent plastics, producing molds of excellent color. Suitable for polystyrene, ABS, PMMA, polycarbonate, polyamide and other resins.

Oplas® Blue 2N (Solvent Blue 35) is a dyestuff particularly suitable for the coloring of transparent plastics, producing molds of excellent color. Suitable for polystyrene, ABS, PMMA, polycarbonate, polyamide and other resins.

Oplas® Violet 730 (Solvent Violet 13) is a dyestuff particularly suitable for the coloring of transparent plastics, producing molds of excellent color.Suitable for polystyrene, ABS, PMMA, polycarbonate, polyamide and other resins.

Nubian® BLACK TH-807 azine dye is recommended for use in PA-6,6 and PA-4,6 and is suitable for use in PA-6, PA-6,10, 6T-Nylon and 9T-Nylon.Nubian® BLACK TH-807 exhibits high heat resistance.

Nubian® BLACK PA-2800 is a metal complex dye recommended for use in several types of polyamide, including PA-6 PA-6,6, PA-4,6, PA-6,10, PA-11, PA-12 and non-crystalline PA.

Nubian® RED PA-2300 is a metal complex dye recommended for use in several types of polyamide, including PA-6 PA-6,6, PA-4,6, PA-6,10, PA-11, PA-12 and N.C. PA.

Nubian® YELLOW PA-2100 is metal complex dye recommended for use in several types of polyamide, including PA-6 PA-6,6, PA-4,6, PA-6,10, PA-11, and PA-12.It is also suitable for use in polycarbonate.

Oplas® Blue 635 (Solvent Blue 97) is a dyestuff particularly suitable for the coloring of transparent plastics, producing molds of excellent color.Suitable for polystyrene, ABS, PMMA, polycarbonate, polyamide and other resins.

Nubian® BLUE PA-4601 is a phtalocyanine dye recommended for use in polycarbonate and several types of polyamide and other resins.

Nubian® BLACK PC-0870 mixture dye is recommended for use in PMMA and ABS and is suitable for use in polystyrene and polycarbonate.Nubian® BLACK PC-0870 exhibits high gloss at low dilutions.

Nubian® BLACK PC-5857 is a mixture recommended for use in polycarbonate, polystyrene, PMMA, and ABS and has high gloss at low dilutions.

Nubian® BLACK PC-5856 mixture dye recommended for use in polycarbonate and ABS and has high gloss at low dilutions.

Oplas® Yellow 156 (Solvent Yellow 116) is a dyestuff particularly suitable for the coloring of transparent plastics, producing molds of excellent color.Suitable for polystyrene, ABS, PMMA, polycarbonate, polyamide and other resins.

Nubian® BLACK PC-8550 mixture dye is recommended for use in polycarbonate and ABS and is suitable for use in polystyrene and polycarbonate.

Nubian® RED PA-3300 is a perinone dye recommended for use in several types ofpolyamide, including PA-6 PA-6,6, PA-4,6, PA-6,10, PA-11, PA-12 and N.C. PA.

Nubian® YELLOW PA-7100 is a quinophthalone dye recommended for use in polycarbonate and several types of polyamide, including PA-6 PA-6, 6, and 9T-Nylon.

Oplas® Yellow 120 (Solvent Yellow 163) is a dyestuff particularly suitable for the coloring of transparent plastics, producing molds of excellent color.Suitable for polystyrene, ABS, PMMA, polycarbonate, polyamide and other resins.

Nubian® BLACK NH-805 azine dye is recommended for use in PA-6 and suitable for use in PA-6,6.