Products in Coatings & Finishes: Styrene Acrylics

Hydropalat® WE 3437 serves as a wetting agent and emulsifier, offering excellent substrate wetting, emulsification capabilities, gloss improvement, and pigment wetting. It functions as an anionic surfactant and is presented as a colorless to slightly yellowish liquid. It serves as a surfactant, wetting agent, anionic surfactant, and emulsifier. Notably, it carries labeling claims of being silicone-free, solvent-free, and APEO-free. Hydropalat® WE 3437 proves to be an effective anionic wetting agent and emulsifier specifically tailored for waterborne coatings and inks.

FoamStar® ED 2521 serves as an emulsion defoamer, providing excellent foam suppression during grinding and application. It retains antifoam efficiency during extended storage of paint, is easy to incorporate without requiring strong shear forces, and does not lead to a loss of gloss or fogging.

Rheovis® PU 1256 is a polyurethane-based associative thickener, serving as a solvent-free, non-ionic, mid-shear rheology modifier for aqueous coatings. It imparts pseudoplastic behavior to aqueous systems, showcasing pH-independent thickening. This modifier improves flow and gloss, increases hiding power, and provides wash and scrub resistances, along with outstanding spatter resistance during roller application. Its chemical nature involves a polyurethane polymer in water/diluent.

Loxanol® CA 5330 is a coalescing agent. It is an excellent coalescing agent in architectural coatings, industrial coatings, construction and building products, and graphic arts applications. It can be used with all kinds of binders, particularly with vinyl acetates, styrene acrylates, and pure acrylic resins. Due to its characteristic odor, Loxanol® CA 5330 is only recommended for exterior applications.

FoamStar® ST 2438 is a 100% active defoamer compound combining a hyper-branched FoamStar polymer with high-end organo-silicones. It delivers fast foam knockdown with high efficiency. This defoamer does not reduce the gloss of high gloss paints and coatings, making it effective in difficult-to-defoam high gloss formulations. It ensures fast bubble-break versus conventional defoamers, effectiveness against microfoam, no separation or settling, very good persistence, and suitability for deep and clear/neutral bases.

HALOX® 570 is an organic corrosion inhibitor designed for use in waterborne industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. HALOX® 570 is especially effective along weld seams and, in some cases, can also be used in solvent-based coatings and UV-cured systems. HALOX® 570 may be used in formulations based on waterborne acrylic latexes and co-polymers, styrene/acrylic latexes, acrylate epoxy esters, 2-pack epoxy systems, alkyds, alkyd/acrylic blends, and 1 or 2-pack polyurethane. HALOX® 570 may be used in both waterborne primers and direct-to-metal topcoats. In direct-to-metal coatings, HALOX® 570 has a minimal effect on gloss reduction.

ASCONIUM® 142DA can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCONIUM® 112 can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCONIUM® 140 can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCONIUM® 130 is a liquid additive that improves the anti-corrosion and hydrophobic properties of both waterborne and solventborne metal coatings and enhances their adhesion to metal substrates. This product can be used alone or in combination with other anti-corrosion agents.

ASCONIUM® 114 can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCONIUM® 143 can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCONIUM® 111 can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCONIUM® 144DA can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ECONYL® BIVA YELLOW YX1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® BLUE BL3 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® ULTRAMARINE BLUE BX2 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB GREENISH YELLOW 07 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® RED SCARLET RHF are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® RED OXIDE RX1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB WHITE 01 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB REDDISH YELLOW 13 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® MAGENTA MG1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® VIOLET VL1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB MEDIUM YELLOW 14 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® YELLOW YE2 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® BLACK BK1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® RED OXIDE RX2 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® RED RD1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB BLACK 04 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB RED OXIDE 03 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® GREEN GR1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® YELLOW OXIDE YX3 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® ORANGE OXIDE YOX are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® YELLOW YHF are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB YELLOW OXIDE 02 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.