Products in Other Adhesives & Sealants Applications: Powder Coating

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

Cales De Llierca Precipitated Calcium Carbonate (Pcc) is a precipitated calcium carbonate with scalenohedral morphology. Its particular structure, purity and size distribution curve enable increased whiteness and opacity when it is used as filler in paper.

MicroDyne™ 105 is a free flowing powdered material that easily disperses in many substrates (e.g., plastic resins, adhesives, sealants, coatings) and can provide significant cost savings while providing the same or improved performance. Its fine particle size provides a smooth surface appearance on finished products and is a “green” material made from end-of-life tires. A free flowing black powder produced from recycled rubber material as defined by ASTM D 5603-01 Grades 1, 2, 3, and 4.

MPI Chemie UV-234 (900) is a high molecular weight ultraviolet light absorber (UVA) of the hydroxyphenyl benzotriazole class, imparting good light stability to a variety of polymers.

Xysil® 150 is a hydrophilic fumed silica with a specific surface area of 150m2/g, and it is synthetic, hydrophilic, amorphous silica, produced via flame hydrolysis.

ASCOM 30 limestone powder is the highest whiteness and high purity with low iron, silica and magnesium levels. Limestone is derived from enormous reserves.

The AMPARMOR® 2000 series is a uniquely engineered microcapsule containing a patented blend of healing agent based on epoxy functionalized polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. The AMPARMOR® 2000 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems.

Nordkalk W200 is characterized by different particle sizes and low, medium or high aspect ratio (L/D). In addition, wollastonite products are available surface treated, e.g. in plastics to enhance dispersion in polymer resin. Due to its unique chemical composition, particle structure and high brightness, wollastonite offers many advantages for glazing and body formulations in ceramic applications. Wollastonite is used as a functional filler in paint & coating applications, where technical requirements are high.

Nigtas 3 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Long Oil Synthetic Paints, Rapit based Industrial Paints, Short Oil Cellulosic Paints, Marine Paints, Furniture Paints, Epoxy Paints, Printing Inks, Static Powder Coatings.

INHIBISPHERES® ZS is submicron ceramic particles that can provide specific functionalities to classic coating formulations. INHIBISPHERES® ZS is porous silica particles containing encapsulated corrosion inhibitors. INHIBISPHERES® ZS (ISZS) releases quickly to slow corrosion in the scribe (250 hours).

INHIBISPHERES® ZB is submicron ceramic particles that can provide specific functionalities to classic coating formulations. INHIBISPHERES® ZB is porous silica particles containing encapsulated corrosion inhibitors. Low levels of INHIBISPHERES® ZB give superior performance when compared to a traditional corrosion inhibitor on steel.

Aspanger Aspolit Aspolit G400 is a special 3-component filler consisting of the minerals muscovite, quartz and chlorite from its own deposit.

euroMinerals inlime is your best partner for high quality lime. inlime can be used as chemical agent for a wide range of applications too. Ultrafine ground quicklime (calcium oxide powder) used like a desiccant agent in polymers (plastics, rubbers), elastomers, adhesive and sealant formulations. Removing moisture with our range of calcium oxide powders will help to prevent many technical problems and defects from the production process and finished products. Furthermore, our calcium oxide and calcium hydroxide products can be used as acid scavenger.

AKTIFIT PF 111 is a Calcined product based on SILFIT Z 91 coated with alkyl silane.

Amparmor® 1000 is a uniquely engineered microcapsule containing a patented blend of healing agent based on silicone-based resins, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. AMPARMOR® 1000 is recommended for use in liquid solvent-based, water-based resins and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems.

JSC SUMYKHIMPROM Titanium Dioxide Sumtitan R-2061 is characterized by increased atmospheric resistance, high optic characteristics. Is recommended to produce masterbatch, thermoplastics, high strength PVC for both interior and exterior applications, to produce elastomers, rubber, paper (incl. paraffin and ornamental paper), paper coatings (incl. wallpaper), food packaging, leather, white cement, sealants, adhesives, organosoluble semi-matt paints for interior and exterior operations, beddings, putties, silicate paints, finishing mortars (incl. cement mortars), polymer coatings, powder coatings, epoxy coatings, rubber.

Nordkalk W325 is characterized by different particle sizes and low, medium or high aspect ratio (L/D). In addition, wollastonite products are available surface treated, e.g. in plastics to enhance dispersion in polymer resin. Due to its unique chemical composition, particle structure and high brightness, wollastonite offers many advantages for glazing and body formulations in ceramic applications. Wollastonite is used as a functional filler in paint & coating applications, where technical requirements are high.

ASCOM 25 limestone powder is the highest whiteness and high purity with low iron, silica and magnesium levels. Limestone is derived from enormous reserves.

General Carbon Company Lampblack exhibit excellent resistance to degradation by UV light, acids, alkalis or organic solvents.

Nordkalk ENRICH C is an ultrafine precipitated calcium carbonate (PCC) product created to replace titanium dioxide and binder in paints and coatings. The multi-functional product innovation of Nordkalk Enrich has increasingly generated greater attention across the market, creating value in various fields of application in paints & coatings, adhesives, paper, inks and building materials.

HALTEX® 302 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

Dog Chemie Homogenizers 501 is aromatic C9 hydrocarbon resins. C9 hydrocarbon resins are versatile in use and widely compatible with various polymers. Major application areas are hot melts, printing inks, paints and solvent based adhesives. Due to their aromatic structure, C9 hydrocarbon resins are more compatible with polar elastomers than a C5 resin.

Kukdo Chemical KD-4014 Epoxy Resins are bisphenol-A type half-capped epoxy resin, and designed for applications of high performance powder coating, especially FBE(Fusion Bonded Epoxy coating). The most advantage of these products is that residual bisphenol-A content is the less than one percent by weight. Also, these products have excellent performance of block resistance, chemical resistance and mechanical properties.

HALTEX® 310 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

CLiQFLOW® 707 is a hydrogenated castor oil based thixotropic additive for solvent-free and non-to low-polar solvent based systems. It imparts a strongly shear thinning flow behavior with excellent sag resistance and good flow and leveling. Anti-settling properties and work ability are also improved with the organic thixotrope.

SB-632 is a ground high whiteness Alumina Trihydrate (ATH) flame retardant with an average median particle size of 3.5 microns.SB-632 is a mechanically produced ATH product designed for plastic and rubber applications requiring a fine particle size. The high surface area of SB-632 provides a low-cost approach to flame retardant and smoke suppression in applications such as urethane foam, vinyl, SBR belting, EPDM, EPR, adhesives, coatings, ABS,polyolefins and XLPE.

Nigtas 10 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Epoxy Paints, Marine Paints, Epoxy Paints, Static Powder Coatings.

HT-S317 is an improved new product, which has strong versatility, in a wide range of solvent systems have good tactile performance, ideal dispersion performance, its colloidal colorless or light color.

SILFIT Z 91 is a Calcined product based on Sillitin Z 86.

MicroDyne™ 75 is a free flowing powdered material that easily disperses in many substrates (e.g., plastic resins, adhesives, sealants, coatings) and can provide significant cost savings while providing the same or improved performance. Its fine particle size provides a smooth surface appearance on finished products and is a “green” material made from end-of-life tires. A free flowing black powder produced from recycled rubber material as defined by ASTM D 5603-01 Grades 1, 2, 3, and 4.

MicroDyne™ 400 is a free flowing powdered material that easily disperses in many substrates (e.g., plastic resins, adhesives, sealants, coatings) and can provide significant cost savings while providing the same or improved performance. Its fine particle size provides a smooth surface appearance on finished products and is a “green” material made from end-of-life tires. A free flowing black powder produced from recycled rubber material as defined by ASTM D 5603-01 Grades 1, 2, 3, and 4.

Alteo SH150 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut. It is available from from 25 to 4 microns.

ASCOM 50 limestone powder is the highest whiteness and high purity with low iron, silica and magnesium levels. Limestone is derived from enormous reserves.