Products in Other Adhesives & Sealants Applications: Reactive Diluent

Evonik Polymer OH 2 is a polydimethyl siloxane with terminal silanol groups, serving as a fundamental component in the formulation of condensation-curing silicone elastomers. This product is offered in a range of viscosity levels, spanning from 100 to 400,000 mPas. In its physical form, it appears clear and colorless. Chemically, it is characterized as hydroxy-terminated polydimethyl siloxanes.

VISIOMER® BNMA (benzyl methacrylate) is an aromatic monofunctional methacrylate known for its low viscosity. It serves as a reactive diluent, offering excellent solvency in adhesive, ink, and coating formulations. This versatile compound finds applications in various industries, including adhesives and sealants, coatings, composites, and electronics.

VISIOMER® EGDMA (ethylene glycol dimethacrylate) is a hydrophilic dimethacrylate monomer renowned for its low viscosity. It is an excellent choice as a crosslinking agent, effectively enhancing the resistance properties of polymers and elastomers. This versatile compound finds applications in various industries, including 3D printing, adhesives and sealants, coatings, construction, personal care, and healthcare, as well as plastics and rubber.

TEGOPAC® RD 1 are silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. They can also be used for formulations to avoid migration effects. A replacement against migrating plasticizers is possible. TEGOPAC® RD 1 can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers, and other additives is possible to address applications like parquet adhesives, roof sealing applications or pressure sensitive adhesives.

VISIOMER® THFMA is a low viscosity and low odor monomethacrylate monomer that significantly enhances flexibility and adhesion in adhesive applications. Its low volatility makes it suitable as a reactive diluent for reactive systems, particularly in adhesives. Industries such as adhesives and sealants, coatings, and construction benefit from the diverse applications of VISIOMER® THFMA.

VISIOMER® PEG 200 DMA (polyethylene glycol 200 dimethacrylate) is an aliphatic dimethacrylate monomer with low viscosity, making it an excellent choice as a co-monomer to enhance the mechanical properties and chemical resistance of resins. This label-free monomer finds applications in a variety of industries, including 3D printing, adhesives and sealants, coatings, composites, construction and, personal care.

VISIOMER® TRGDMA (triethylene glycol dimethacrylate) is a dimethacrylate monomer with low viscosity, making it well-suited for use as a crosslinking agent in free radical polymerization. Additionally, it serves as an adhesion promoter and hardener for PVC plastisols, as well as a component in reactive resins. This versatile compound finds applications in a wide range of industries, including 3D printing, adhesives and sealants, coatings, construction, personal care, and healthcare, as well as plastics and rubber.

VISIOMER® TMPTMA (trimethylol propane trimethacrylate) is a trifunctional methacrylate monomer renowned for its ability to serve as a crosslinking agent. It imparts cohesive strength and high temperature resistance to polymers and elastomers by forming dense networks. This versatile monomer finds applications in industries such as 3D printing, adhesives and sealants, coatings, construction, as well as plastics and rubber.

VISIOMER® ETMA (ethyltriglycol methacrylate) is a hydrophilic methacrylate monomer known for its ability to enhance adhesion, flexibility, and minimize shrinkage in polymers. It exhibits low volatility and serves as a reactive diluent in reactive systems. This versatile compound finds applications in industries such as adhesives and sealants, as well as coatings.

Andisil® OH 40 is a Low viscosity 3.5% silanol fluid. Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Andisil® OH 30 is a Low viscosity 6% silanol fluid. Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Andisil® OH 70 is a Low viscosity 1.25% silanol fluid. Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Bisomer® DALP (Diallyl Phthalate (1,2-Benzene dicarboxylic acid, di-2-propenyl ester)

Bisomer® PPA6 is a hydroxyl functional acrylate monomer.

PHOTOMER® 4149 is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an unusually effective reactive diluent with excellent solvency and viscosity reducing characteristics in radiation curable formulations based on epoxy, polyurethane, and polyester oligomers.

Kanamoll 650 is a vegetable oil-based light colored secondary plasticizer. ESBO is manufactured from soybean oil through the process of epoxidation. It is been used widely as plasticizer because of high numbers of epoxidized carbon-carbon double bonds. The epoxide group is more reactive due to double bonds, thus making it a good hydrochloric acid scavenger and plasticizer.

Denacol EX-810 is used in cross-linking agent for resin Hydrophilizing agent.

Jiangsu Tetrachem TTA27 is a white powdery substance that is reacted through diene oxidation. This product has low viscosity, heat and weather resistance with electrical insulation performance. TTA27 is primarily used as a diluent in coatings and adhesives.

Bisomer® PEA6 is a hydroxyl functional methacrylate monomer.

Photomer® 4184 is a monofunctional urethane acrylate which can be used as a reactive diluent for radiation curable coatings, inks and adhesives. It is non-yellowing with a low odor and offers improved flexibility and adhesion to plastics. It exhibit of low shrinkage and high elongation and stress at break with a Tg of - 3°C.

PHOTOMER® 4006 TF (TMPTA) is a toluene free aliphatic trifunctional acrylate of low viscosity and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an effective reactive diluent with excellent solvency and viscosity reducing characteristics in UV/EB curable formulations based on epoxy, polyurethane, and polyester oligomers

Jiangsu Tetrachem TTA11 is a clear liquid epoxy with the chemical name 4-Vinyyl-1-Cyclohexene 1,2-Epoxide. This product is reactive through its vinyl and epoxy abilities. It also can be used as a reactive diluent where high crosslink density is not crucial. TTA11 is primarily used in sealants.

MM-204 is a mono-functional acrylate monomer. It has low shrinkage and a high glass transition temperature upon cure. The secondary ester linkage is resistant to hydrolysis.

MM-220 is a low viscosity mono-acrylate monomer. The polycyclic ring structure helps minimize shrinkage on cure. It also has low weight loss on cure. 

PHOTOMER® 4149 TF is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an unusually effective reactive diluent with excellent solvency and viscosity reducing characteristics in radiation curable formulations based on epoxy, polyurethane, and polyester oligomers.

Bisomer® TEGDMA (Triethyleneglycol Dimethacrylate).

Omnimer ACMO is a low viscosity, monofunctional UV reactive diluent for UV and EB radiation curable formulations. The product exhibits of excellent heat resistance and low odor (due to its low vapor pressure) .

Kanamoll is a vegetable oil-based light colored secondary plasticizer. ESBO is manufactured from soybean oil through the process of epoxidation. It is been used widely as plasticizer because of high numbers of epoxidized carbon-carbon double bonds. The epoxide group is more reactive due to double bonds, thus making it a good hydrochloric acid scavenger and plasticizer.

Jiangsu Tetrachem TTA15 is a light yellow liquid with the chemical name 3,4-Epoxycyclohexylmethyl Methacrylate. This product has both properties of epoxy and acrylic resins and has the ability to cure multiple different ways. It has low viscosity, heat resistance, weather resistance and electrical insulation. TTA15 is primarily used in coatings and adhesives.

EPOXOL® EMS is a zero VOC functional modifier, reactive diluent, acid scavenger, chemical intermediate, and plasticizer. It exhibits high solvency strength, excellent viscosity reduction and plasticization properties. Epoxol® EMS is compatible with epoxies, polyurethanes, acrylics, alkyds, and a variety of other resins. It has epoxide functionality, very low color and odor, is non-yellowing, very hydrophobic, and does not contain halogens. Applications include Coatings, Sealants, Adhesives, Elastomers, Electronic Applications, Degreasers, PVC, Rubber and Lubricants. The high bio-derived content makes EPOXOL® EMS an excellent choice for renewable formulations.

Bisomer® Amine D700 (77% aqueous dimethylamino hydroxypropane solution) is a multifunctional amino alcohol additive.

Denacol EX-321 is used in reactive diluent.

WSCM-5110 has monofunctional reactive epoxy diluent, low viscosity, can improve toughness and water resistance, used in high solids or solvent-free systems.

Jiangsu Tetrachem TTA3150 is a clear solid product that has a cyclohexane structure and terminal epoxy and terminal epoxy groups. This product has low viscosity and provides heat and weather resistance. It is an active epoxy diluent. TTA3150 is primarily used in coatings and in adhesives.